Curtis 1620S - Manual

Curtis 1620S

Curtis 1620S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – Warranty; All specifications subject to change without notice.
  • Page 3 – CONTENTS
  • Page 5 – Charge Cycle Profile
  • Page 6 – Figure 1. Charge profile for End of Charge Mode
  • Page 7 – Figure 2. Charge profile for Equalize Mode
  • Page 8 – Figure 3. Charge profile for Float Mode
  • Page 9 – Indication Lights; Flash Pattern
  • Page 10 – INSTALLATION
  • Page 11 – OPERATION; Charging the battery; is present, connect the Motor Controller Inhibit connector to the; Programming Options; indicators. The yellow and green indicators will blink on and off
  • Page 12 – TROUBLESHOOTING
  • Page 13 – MAINTENANCE; on either side of the fan and gently pulling the fan guard away.
  • Page 14 – Table 1. Programming Parameters
Loading the manual

m a n ua l

MODEL

1 6 2 0

S W I T C H M O D E
BATTERY CHARGER

Before charging, read
instructions carefully!

®

Applicable to 230VAC units only

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Warranty; All specifications subject to change without notice.

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Read the Operating Instructions carefully before using the Model 1620 charger. 1. WARNING – Failure to install and operate the charger in accordance with these instructions may result in damage to the charger or injury to the operator. 2. WARNING...

Page 3 - CONTENTS

CONTENTS 1. MODEL ENCODEMENT ............................. page 1 2. TEChNICAL SPECIFICATIONS .................. page 1 3. INSTALLATION ............................................. page 7 4. OPERATION ................................................... page 8 5. TROUBLEShOOTING .......................

Page 5 - Charge Cycle Profile

Wiring diagram 1. 2.4 Environmental Operating temperature: 0°C to +50°C Storage temperature: -40°C to +85°C humidity: 95% non-condensing at 38°C Shock: SAEJ1378, 55g pulse at 9-13ms Vibration: 5g rms, 5-500 hz, 2 hrs. per axis Protection: IP-54, including fan 2.5 Compliance 2.6 Battery Types This ch...

Other Curtis Models

All Curtis Other