Crown PET940 - Manual
Crown PET940 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – II. Specifications
- Page 4 – I. Product Description
- Page 8 – III. Before Installing; Before installing this product:; IV. Location and Mounting; Provide the following clearances for servicing the Bimini Buddy:; CAUTION
- Page 9 – THIS PAGE INTENTIONALLY LEFT BLANK
- Page 10 – V. Boiler and System Piping
- Page 11 – imini Buddy Shown Above Boiler to Faciliate Air Removal)
- Page 12 – Table 5.4: Crown Indirect Water Heaters
- Page 16 – WARNING; injury or death due to scalding. To minimize the risk of scalding:; water upstream of the cold water connection to the Bimini Buddy.
- Page 20 – Line Voltage
- Page 22 – A. BWC Boilers Equipped with Type III MCBA; DHW Configuration
- Page 23 – FIGURE 7.5: Wiring BB100C to Boiler equipped with Sola; be restored if operation of the boiler is not as anticipated.
- Page 24 – B. BWC Boilers Equipped with Sola; Crown Boiler Company
- Page 25 – Cover and Mounting Components - All Models
- Page 27 – Piping Components - BB100C
- Page 28 – Manufacturer of Hydronic Heating Products
Bimini Buddy
NEAR-BOILER PIPING MODULE
INstALLAtION INstRUCtIONs
Models:
BB100H
•
BB100I
•
BB100C
•
WARNING
: Improper installation, adjustment, alteration,
service or maintenance can cause property damage,
injury, or loss of life. For assistance or additional informa-
tion, consult a qualified installer, service agency or the
gas supplier.
Manufacturer of Hydronic Heating Products
P.O. Box 14818 3633 I. Street
Philadelphia, PA 19134
www.crownboiler.com
D
E S I G N E D T O
L
E A D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Table of Contents I. Product Description 2 II. Specifications 2 III. Before Installing 6 IV. Location and Mounting 6 V. Boiler and System Piping 8 VI. BB100C Domestic Water Piping 14 VII. Wiring 16 VIII. Start-up 20 IX. Parts 22
2 3 I. Product Description The Bimini Buddy is a factory assembled near boiler piping module that is designed for use with Crown Bimini (BWC) series boilers. The central component in this product is a hydraulic separator that is designed to assure that the minimum required flow through the boiler is...
6 7 III. Before Installing Before installing this product: Verify that the planned installation will be in accordance with all local codes. In Massachusetts, the BB100C must 1. be installed by a licensed Plumber. When using the BB100C, also verify that: 2. The domestic water output temperature, and ...
