Crown ODV-125 - Manual
Crown ODV-125 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – I Product Description
- Page 5 – II Specifications; Net ratings based on a piping and pickup loss allowance of 1.15
- Page 7 – V Vent System Installation; CAUTION
- Page 11 – ) INSTALLATION OF THE VENT TERMINAL COMBUSTION AIR TEE (Figure 5c)
- Page 16 – VI System Piping; tandard Piping
- Page 18 – Piping for Special Situations
- Page 20 – VII Fuel Piping; the tank. Basic piping is shown in Figure 21a.
- Page 21 – VIII WIRING
- Page 22 – IX Start-up and Checkout; WARNING
- Page 23 – X Service Notes; NOTE
- Page 25 – XI Maintenance; ) Shut off power to the boiler
- Page 26 – Warning; AVOID Breathing Fiber Particulates and Dust; Precautionary Measures; • Wash work clothes separately fr; First Aid Procedures; • If contact with eyes: Flush with wa
- Page 27 – SECTION XII: REPLACEMENT PARTS
- Page 28 – Figure 24: Boiler Parts
- Page 31 – NOTES
- Page 32 – Manufacturer of Hydronic Heating Products
Oil-Fired Direct Vent Hot Water Boilers
Freeport ODV Series
WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause property damage, injury,
or loss of life. For assistance or additional information
consult a qualified installer or service agency. This boiler
requires a special venting system. Read these instructions
carefully before installing.
These instructions must be affixed on or adjacent to the boiler.
Models
ODV-75
•
ODV-100
•
ODV-125
•
D
E S I G N E D T O
L
E A D
Manufacturer of Hydronic Heating Products
P.O. Box 14818 3633 I. Street
Philadelphia, PA 19134
Tel: (215) 535-8900 • Fax: (215) 535-9736 • www.crownboiler.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 I Product Description The ODV series boiler is a cast iron oil fired boiler designed for use in forced hot water heating systems. The ODV boiler must be vented using the factory supplied venting system with combus - tion air taken from outdoors. The ODV uses the same three pass “scotch marine” hea...
2 II Specifications Ratings based on #2 fuel oil having a higher heating value of 140,000 BTU/Gal Net ratings based on a piping and pickup loss allowance of 1.15 Exhaust pipe: 4” I.D. insulated flexible vent pipe. Maximum exhaust pipe length – 15 ft. Inlet pipe: 4” I.D. Corrugated Aluminum Maximum I...
4 V Vent System Installation The ODV boiler is shipped with a complete venting system consisting of the following components: • FDVS-4 direct vent terminal • Backing plate • 15-ft length of insulated 4” FOVP flexible oil vent pipe • 4” x 7” appliance adapter • (2) Cover rings • (2) Cover sleeves • B...
