Crestron MT-1000C - Manual

Crestron MT-1000C 3.8 Inch RF Remote NOTE : Crestron software and any files on the website are for Authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users are required to register to obtain access to certain areas of the site (including the FTP site). Physi...

Crestron MT-1000C 3.8 Inch RF Remote MT-1000C Controls and Ports Programmable Buttons The MT-1000C has 13 programmable buttons. Programmable Button Locations • VOL Up/Down (1 and 2) • CH Up/Down (3 and 4) • MUTE (5) • INFO (6) • Thumb pad with UP (7), RIGHT (8), DOWN (9), LEFT (10), and SELECT (11) ...

3.8 Inch RF Remote Crestron MT-1000C NOTE: For detailed programming information, refer to the latest version of the MT-1000C Programming Guide (Doc. 6330), which is available from the Crestron website. MT-1000C Docking Station Indicators and Port The MT-1000C has two indicators and one port on the d...

Crestron MT-1000C 3.8 Inch RF Remote 4. Place the battery in the opening, ensuring that the battery wires will not be pinched when you replace the battery cover. 5. Replace the battery cover and rotate the locking screw counterclockwise to lock. NOTE: A replacement battery may be ordered from Crestr...

3.8 Inch RF Remote Crestron MT-1000C Place the MT-1000C in the cradle of the docking station and press down until you hear a click. When the MT-1000C is properly seated on the docking station, the Status LED lights up red while the battery is charging. The status LED turns blue when the battery is f...

Crestron MT-1000C 3.8 Inch RF Remote NOTE: The configuration screen automatically times out after 30 seconds of inactivity and returns to normal operation. Backlight Adjust the timeout of the backlight both on and off the docking station (cradle). You can select up to three minutes for on the batter...

3.8 Inch RF Remote Crestron MT-1000C Button Light Buttons can be backlit when touched, or always off to conserve battery life. Sound Adjust the volume of programmed audio. Date & Time Set the date and time. 10 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322

Crestron MT-1000C 3.8 Inch RF Remote Power Displays the remaining charge and sets the low battery indication level. System Displays system memory and version information. Pickup Sets the MT-1000C to turn on when picked up or moved. Operations Guide – DOC. 6322 3.8 Inch RF Remote: MT-1000C • 11

3.8 Inch RF Remote Crestron MT-1000C Calibration Calibrates the touchscreen. Use a stylus or pen top (not a finger) and follow the directions on the screen. Factory Default Resets the memory to the factory condition. WARNING: All programming will be lost. Do not use this button unless directed to do...

Crestron MT-1000C 3.8 Inch RF Remote Care and Maintenance • To avoid scratching the touchscreen, do not use a pen, pencil, or any sharp object. Use a plastic pen top, PDA stylus, or your finger. • The MT-1000C is not waterproof. Avoid using it in damp or wet locations. • Keep the MT-1000C away from ...

3.8 Inch RF Remote Crestron MT-1000C MT-1000C Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Devices not powered up Check power to devices and check that devices are on Battery charge is low Recharge battery RF Gateway not functioning Check power to RF Gateway Out of RF rang...

Crestron MT-1000C 3.8 Inch RF Remote Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RM...