Crestron IPAC - Manual
Crestron IPAC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IPAC; Installation; The following tools are required for installation of an IPAC:; Install the Mounting Plate; Complete all other connections before wiring the 4-position; NET
- Page 3 – Crestron; Integrated Professional Automation Computer; NET Connectors; NETWORK DEVICE
- Page 4 – LAN Connector; LAN; PIN; COM Connector; COM; Incorrect wiring may damage the IPAC.
- Page 5 – RELAYS Connector; RELAYS; INPUTS
- Page 6 – Attach the IPAC to the Mounting Plate; Remove the Label Holder
- Page 7 – Affix Labels to the Label Holder; Attach the Faceplate to the IPAC
- Page 8 – Specifications
- Page 9 – Industry Compliance; Reorient or relocate the receiving antenna.
- Page 10 – Problem Solving; Troubleshooting; Reference Documents; ). This link will provide a list of product; DOCUMENT TITLE; Further Inquiries
- Page 11 – Appendix; The following labels are included with the IPAC:
- Page 12 – Return and Warranty Policies; Merchandise Returns / Repair Service
IPAC
Introduction
This document contains instructions for installing the IPAC series of wall-mounted,
Integrated Professional Automation Computers.
The IPAC is designed for installation in a standard 3-gang electrical box.
IPAC-GL1-W-T Physical View (shown in white)
Supplied Parts
The parts supplied with the IPAC are listed in the following table.
Supplied Hardware for the IPAC
DESCRIPTION PART
NUMBER
QUANTITY
Mounting Plate with Ground Wire
4506280
1
Screws, 06-32 x ¾”, Combo Head
2009211
4
Screws, 04-40 x ¼”, Pan, Phil
2007156
2
Screws, 04-40, 7/16", Pan, Phil, Blk
(for Black units)
OR
Screws, 04-40, 7/16", Pan, Phil, Zinc
(for White units)
2022900
2013409
4
Label Sheet
4505784 (Black)
OR
4506570 (White)
1
Front Cover
4505711 (Black)
OR
4505867 (White)
1
Crestron Electronics, Inc.
Installation Guide – DOC. 6696A
15 Volvo Drive Rockleigh, NJ 07647
(2022187)
Tel: 888.CRESTRON
12.08
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Integrated Professional Automation Computer Crestron IPAC Installation The following tools are required for installation of an IPAC: • Philips screwdriver • Flat screwdriver; 3/32” (2.4 mm) blade size Install the Mounting Plate Use the four included 06-32 x ¾” screws to install the mounting plate on...
Crestron IPAC Integrated Professional Automation Computer WARNING: Prior to connecting the IPAC, turn off power at the power supply. Failure to do so may result in serious personal injury or damage to the device. Restore power after all connections have been made. When making connections to the IPAC...
Integrated Professional Automation Computer Crestron IPAC LAN Connector The following illustration shows the pin assignments of the RJ-45 LAN connector. WARNING: Incorrect wiring may damage the IPAC. GREEN LED YELLOW LED PIN 8 PIN 1 PIN SIGNAL PIN SIGNAL 1 TX + 5 N/C 2 TX - 6 RC - 3 RC+ 7 N/C 4 N/C ...
