Crestron GLA-PWS50 - Manual

Crestron GLA-PWS50

Crestron GLA-PWS50 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – Industry Compliance; Reorient or relocate the receiving antenna.
  • Page 3 – Application
  • Page 4 – Physical Description; Setup; Important Notes; Read before installation.; Not suitable for Hazardous/Classified areas.; Supplied Hardware
  • Page 5 – Assembly; Hardware Hookup; Installation
  • Page 6 – Only use the specified type of fuse; Problem Solving; Troubleshooting; Further Inquiries; Return and Warranty Policies; Merchandise Returns / Repair Service
Loading the manual

GLA-PWS50

Crestron Electronics, Inc.

Installation Guide – DOC. 6734A

15 Volvo Drive Rockleigh, NJ 07647

(2022081)

Functional Summary

The GLA-PWS50 is a 50 Watt Cresnet

®

Power Supply

designed for use with a Crestron

®

Green Light™ system,

or anywhere a wall-mountable Cresnet power supply is
needed. The GLA-PWS50 mounts conveniently over a 4”
square or 2-gang electrical box. All connections are made
inside the electrical box via flying leads using twist-on
wire connectors. A partition is included to isolate high
voltage from Class 2 wiring within the box.

50 Watt Cresnet power supply

Powers the IPAC and other Cresnet devices

Provides backup power for Crestron Green Light
cabinets

Mounts to a 4” square or 2-gang electrical box

GLA-PWS50 Physical View

Specifications

GLA-PWS50 Specifications

SPECIFICATION DETAILS

Output Power

Output

Power


Ripple/Noise

50 Watts (2.1 Amps) @ 24 Volts
DC, regulated, limited power
source

<1%

Power Requirements

Input

0.6 Amps @ 100-240 Volts AC,
50/60 Hz

Enclosure

Metal construction, mounts to a
4-inch square or 2-gang
electrical box, includes low-
voltage partition

Environmental

Temperature

Humidity

Heat

Dissipation

32° to 104°F (0° to 40°C)

10% to 90% RH
(non-condensing)

26 BTU/Hr

Dimensions
Height
Width
Depth


4.00 in (10.16 cm)
5.55 in (14.09 cm)
2.27 in (5.76 cm)

Weight

1.2 lbs (0.54 kg)

Tel: 888.CRESTRON

02.09

Fax: 201.767.7576

Specifications subject to

www.crestron.com

change without notice.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Industry Compliance; Reorient or relocate the receiving antenna.

50 Watt Cresnet Power Supply Crestron GLA-PWS50 Industry Compliance As of the date of manufacture, the GLA-PWS50 has been tested and found to comply with specifications for CE marking. NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)...

Page 3 - Application

Crestron GLA-PWS50 50 Watt Cresnet Power Supply Application The following diagram shows a GLA-PWS50 module in a typical application. GLA-PWS50 in a Lighting Application Installation Guide – DOC. 6734A Wall Mount 50 Watt Cresnet Power Supply: GLA-PWS50 • 3

Page 4 - Physical Description; Setup; Important Notes; Read before installation.; Not suitable for Hazardous/Classified areas.; Supplied Hardware

50 Watt Cresnet Power Supply Crestron GLA-PWS50 Physical Description This section provides information on the connections, controls and indicators available on the GLA-PWS50. GLA-PWS50 Overall Dimensions 5.55 in (14.09 cm) 4.00 in (10.16 cm) 5.03 in (12.77 cm) 2.15 in (5.45 cm) 0.12 in (0.31 cm) GLA...

Other Crestron Models

All Crestron Other