Page 2 - 5 Volvo Drive
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
Page 3 - Contents
Crestron CSP-LSP Lightning Strike Protector Contents Cresnet ® Lighting Strike Protector: Crestron CSP-LSP 1 Introduction ............................................................................................................................... 1 Features and Functions ............................
Page 5 - Introduction; Features and Functions
Crestron CSP-LSP Lightning Strike Protector Cresnet ® Lighting Strike Protector: Crestron CSP-LSP Introduction The CSP-LSP is an accessory designed to protect a Crestron ® control system from lightning surges and other electrical disturbances brought through the Cresnet control line. Four-stage ligh...
Page 6 - CONTROL SYSTEM; ports are provided, paralleled for; DEVICE; ports accommodate the connections from one
Lightning Strike Protector Crestron CSP-LSP that span multiple buildings, a separate CSP-LSP can be installed in each building to protect all of the local devices within each building. The CSP-LSP is designed for mounting to a wall or similar flat surface. Two protected CONTROL SYSTEM ports are prov...
Page 7 - Applications; CSP-LSP Application for Local Systems
Crestron CSP-LSP Lightning Strike Protector Applications The following diagrams show the CSP-LSP in a series of different applications. CSP-LSP Application for Local Systems Operations & Installation Guide – DOC. 6643A Lightning Strike Protector: CSP-LSP • 3
Page 8 - CSP-LSP Application for Long Runs
Lightning Strike Protector Crestron CSP-LSP CSP-LSP Application for Long Runs 4 • Lightning Strike Protector: CSP-LSP Operations & Installation Guide – DOC. 6643A
Page 9 - CSP-LSP Application for Multiple Building Systems
Crestron CSP-LSP Lightning Strike Protector CSP-LSP Application for Multiple Building Systems Operations & Installation Guide – DOC. 6643A Lightning Strike Protector: CSP-LSP • 5
Page 10 - Specifications; Specifications for the CSP-LSP are listed in the following table.; SPECIFICATION DETAILS
Lightning Strike Protector Crestron CSP-LSP Specifications Specifications for the CSP-LSP are listed in the following table. CSP-LSP Specifications SPECIFICATION DETAILS Protection 4-stage protection employing spark gaps, gas discharge tubes, current limiters, and transient voltage suppressors Clamp...
Page 11 - Physical Description; CSP-LSP Physical View
Crestron CSP-LSP Lightning Strike Protector Physical Description This section provides information on the connections available on your CSP-LSP. CSP-LSP Physical View Operations & Installation Guide – DOC. 6643A Lightning Strike Protector: CSP-LSP • 7
Page 12 - CSP-LSP Overall Dimensions; INDICATORS
Lightning Strike Protector Crestron CSP-LSP CSP-LSP Overall Dimensions 1.75 in (4.45 cm ) 5.23 in (13.29 cm ) 3.40 in (8.64 cm ) 1.83 in (4.65 cm) 1 3 2 2 5.64 in (14.32 cm ) Connectors, Controls & Indicators # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 1 DEVICE (4) 4-pin 3.5mm detacha...
Page 13 - GROUND
Crestron CSP-LSP Lightning Strike Protector Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 2 GROUND (2) 10-32 studs, chassis ground lugs 2 ; 3 ft flat braided grounding strap included; Ground bus bar included for daisy chaining to a second CS...
Page 14 - Industry Compliance; This device complies with part 15 of the FCC rules. Operation is
Lightning Strike Protector Crestron CSP-LSP Industry Compliance As of the date of manufacture, the CSP-LSP has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rul...
Page 15 - Setup; Network Wiring; Supplied Hardware for the CSP-LSP; DESCRIPTION PART; Installation; CSP-LSP Installation
Crestron CSP-LSP Lightning Strike Protector Setup Network Wiring When wiring the network use Crestron Certified Wire. For more details, refer to “Check Network Wiring” on page 17. Supplied Hardware The hardware supplied with the CSP-LSP is listed in the following table. Supplied Hardware for the CSP...
Page 16 - CSP-LSP Ground Clamp Orientation
Lightning Strike Protector Crestron CSP-LSP Ground Clamp Necessary grounding hardware is provided with your CSP-LSP. Refer to the image below when installing the braided ground strap (4505505) and ground clamp (2019803) to a grounded cold water pipe. CSP-LSP Ground Clamp Orientation Daisy Chaining D...
Page 17 - Hardware Hookup; Local Hardware Connections for the CSP-LSP
Crestron CSP-LSP Lightning Strike Protector Hardware Hookup The CSP-LSP can be connected locally to protect a nearby control system and Cresnet devices. The CSP-LSP can also be connected to remote Cresnet devices or another CSP-LSP to provide protection to Cresnet devices that are connected with sub...
Page 18 - Remote Hardware Connections for the CSP-LSP; Do not daisy chain more than two CSP-LSP units in one
Lightning Strike Protector Crestron CSP-LSP Remote Connections Remote connections refer to connections made from the locally connected CSP-LSP to Cresnet devices connected by wire runs exceeding 500 feet or wire runs situated outdoors, including wire runs underground. Cresnet devices at these distan...
Page 19 - Operation; Local CSP-LSP Operation
Crestron CSP-LSP Lightning Strike Protector Operation The CSP-LSP can be connected either locally or remotely, while up to two CSP-LSP devices may be daisy chained together in either connection configuration. Local CSP-LSP Operation Locally, one of the CONTROL SYSTEM ports must be connected to the c...
Page 20 - Daisy Chaining
Lightning Strike Protector Crestron CSP-LSP Daisy Chaining Up to two CSP-LSP units can be daisy chained when a C2N-HBLOCK is not a practical option. Daisy chaining two CSP-LSP units provide up to four protected CONTROL SYSTEM ports. When CSP-LSP units are being daisy-chained together, connect both o...
Page 21 - Problem Solving; Troubleshooting; CSP-LSP Troubleshooting; TROUBLE; Check Network Wiring
Crestron CSP-LSP Lightning Strike Protector Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CSP-LSP Troubleshooting TROUBLE POSSIBLE CAUSE(S) ...
Page 22 - Further Inquiries; ) to ask questions about Crestron products.; Future Updates
Lightning Strike Protector Crestron CSP-LSP Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-78...
Page 23 - Return and Warranty Policies; Merchandise Returns / Repair Service
Crestron CSP-LSP Lightning Strike Protector Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON ...
