Crestron CNLGE-8 - Manual
Crestron CNLGE-8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
AVAILABLE ACCESSORIES
CNLPS-120
Power Supply for CNLGE-8, 120V
CNLPS-277
Power Supply for CNLGE-8, 277V
Specifications for CNLPS (Sold Separately)
Load Ratings
24 Volts AC, 50 VA
For use with CNLGE-8 modules only
Maximum Load: (6) modules
Power Requirements
CNLPS-120:
120 Volts AC, 50/60Hz, single-phase
CNLPS-277:
277 Volts AC, 50/60Hz, single-phase
Connectors
120 VAC:
(1) 2-position captive screw terminal, line power input (CNLPS-120 only)
277 VAC:
(1) 2-position captive screw terminal, line power input (CNLPS-277 only)
COMMON:
(5) Captive screw terminals, output common buss
24VAC:
(5) Captive screw terminals, 24 Volt AC output buss
Fuse:
CNLPS-120: (1) 3AG, 1 Amp, time-lag; CNLPS-277: (1) FLQ 0.5 Amp
Environmental
Temperature:
32° to 104°F (0° to 40°C)
Humidity:
10% to 90% RH (non-condensing)
Enclosure
Occupies 1 module space in a CLC-6 cabinet
(Contact factory for applications requiring CSTC cabinet)
www.crestron.com
|
800.237.2041
The CNLGE-8 module provides 8 channels of switching for non-dimmable lighting
and power loads. Each channel features an isolated SPST mechanically latched
relay, which maintains its state even if power is disrupted. The CNLGE-8 occupies a
single module space in any CSTC or CLC-6 cabinet (not including required CNLPS
power supply), and is designed to communicate with the PAC2 control system, or
any Crestron control system, via the Cresnet control network.
> 8 channels of switching for non-dimmable loads
> Mechanically-latched, isolated, single-pole / single-throw relays
> Each switched circuit maintains its state in case of power failure
> Occupies 1 module space in a CSTC lighting cabinet
> Requires CNLPS power supply
> Controlled by PAC2 or PAC2M automation control system
SPECIFICATIONS
Load Ratings
Relay Closure:
20A @ 125V AC (Tungsten); 20A @ 277V AC (Resistive or Fluorescent
Ballast); 0.5 HP @ 110-125V AC; 1.5 HP @ 220-277V AC;
Note: May not be compatible with some high inrush current loads
Power Requirements
24 Volts AC; requires one CNLPS power supply for every (6) CNLGE-8 modules
Connectors
1 - 8:
(8) 2-position captive screw terminals, isolated Class 1 SPST relay switch circuits
Split-coil, mechanically-latching SPST relay closure
NET:
(1) 4-pin 5mm detachable terminal block, Cresnet slave port
Connects to Cresnet control network
24VAC:
Attached 2-conductor Class 2 cable, relay power input
Connects to CNLPS power supply (sold separately)
Controls
ID CODE:
(2) Rotary DIP Switches, set Cresnet ID
LED Indicators
POWER:
Indicates DC power supplied from Cresnet network
ACTIVITY:
Indicates communication with Cresnet system
1 – 8:
Indicate when each relay is closed
Environmental
Temperature:
32° to 104°F (0° to 40°C)
Humidity:
10% to 90% RH (non-condensing)
Enclosure
Occupies 1 module space in a CLC-6 cabinet
(Contact factory for applications requiring CSTC cabinet)
S p e c i f i c a t i o n s s u b j e c t t o c h a n g e w i t h o u t n o t i c e . D o c . 4 8 3 1 1 2 / 0 7
©2007 Crestron Electronics, Inc. All brand names, product names and trademarks are the property of their respective owners.
Crestron Electronics, Inc. 15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
Crestron CNLGE-8
8 Channel Switch Module
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
