Crestron CNLFDB-4 - Manual
Crestron CNLFDB-4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Controls
ID CODE:
(2) Rotary DIP Switches, set Cresnet ID
NORMAL/OVERRIDE:
(1) Slide switch, OVERRIDE forces all channels to full on
LED Indicators
NET POWER:
Indicates DC power supplied from Cresnet network
ACTIVITY:
Indicates communication with Cresnet system
Channels 1 – 4:
Indicate each relay is energized
Environmental
Temperature:
32° to 104°F (0° to 40°C)
Humidity:
10% to 90% RH (non-condensing)
Heat Dissipation:
17 BTU/Hr + (0.3 BTU/Hr x Load Current in Amps) + (0.02 per ballast),
40 BTU/Hr at maximum load
Enclosure
Occupies 2 module spaces in a CLC-6 cabinet (order optional MTPL-02074-1 space plate)
Occupies 1 module space in a CSTC cabinet
Weight
3.5 lbs (1.59 kg)
www.crestron.com
|
800.237.2041
The CNLFDB-4 dimming module provides 4 channels of dimming for fluorescent
lighting fixtures equipped with Lutron
®
Hi-lume
®
or Eco-10™ three-wire electronic
fluorescent dimming ballasts. The CNLFDB-4 occupies a single module space in
any CSTC cabinet, or two spaces in a CLC-6 cabinet. The unit is designed to
communicate with the PAC2 control system, or any Crestron control system, via
the Cresnet control network.
> 4 channels of phase-controlled dimming for Lutron Hi-lume FDB
or Eco-10 ECO three-wire electronic type fluorescent ballasts
> Switch control of non-dimmable loads
> Available for 120 or 277 Volt AC
> Occupies 1 module space in a CSTC lighting cabinet
> Controlled by PAC2 or PAC2M automation control system
AVAILABLE MODELS
CNLFDB-4
4 Channel Fluorescent Dimmer, 3-Wire Electronic, 120V
CNLFDB-4/277
4 Channel Fluorescent Dimmer, 3-Wire Electronic, 277V
SPECIFICATIONS
Load Ratings
Dimmer Channels:
4
Per Channel:
16 Amps
Module Total:
64 Amps
Load Types:
Hi-lume FDB or Eco-10 ECO 3-wire electronic fluorescent dimming ballasts
Load Control:
Phase-controlled dimming signal plus air-gap relay
Relay Rating:
20 Amp at 277 Volts AC, 1HP at 125 Volts AC
Power Requirements
Line Power:
120 or 277 Volts AC, 60Hz, single-phase, all feeds must be same phase
Cresnet Power Usage:
4 Watts (0.17 Amp @ 24 Volts DC)
Connectors
NET:
(1) 4-pin 5mm detachable terminal block, Cresnet slave port
Connects to Cresnet control network
L-IN 1 - 4:
(4) Captive screw terminals, line power inputs
L-OUT 1 - 4:
(4) Captive screw terminals, switch outputs
DIM 1 - 4:
(4) Captive screw terminals, dimmer outputs
NEUT:
(1) Captive screw terminal, neutral
S p e c i f i c a t i o n s s u b j e c t t o c h a n g e w i t h o u t n o t i c e . D o c . 4 8 3 3 1 2 / 0 7
©2007 Crestron Electronics, Inc. All brand names, product names and trademarks are the property of their respective owners.
Crestron Electronics, Inc. 15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
Crestron CNLFDB-4
4 Channel Fluorescent Dimming
Module, 3-Wire Electronic
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
