Page 2 - 5 Volvo Drive
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON
Page 3 - Channel Professional Audio Amplifier: CNAMPX-2X60; Contents
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Contents 2 Channel Professional Audio Amplifier: CNAMPX-2X60 1 Description................................................................................................................................. 1 Functional Description ..............
Page 5 - Description; Functional Description; Functional Summary; must; Physical Description; Operations Guide – DOC. 8178
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier 2 Channel Professional Audio Amplifier: CNAMPX-2X60 Description Functional Description The CNAMPX-2X60 is a 2-channel, 60-Watts per channel audio amplifier. As part of a Cresnet system, the unit can accept remote power on/off commands and r...
Page 6 - CNAMPX-2X60 Physical Views
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 with stainless steel screws. The front panel contains the main power switch with built-in light-emitting diode (LED). All audio input and output, Cresnet system, and power connections are made on the rear panel. Four rubber feet on the base...
Page 7 - CNAMPX-2X60 Rear Ports and Indicators; CNAMPX-2X60 Rear Panel; INPUTS
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier General Safety Precautions Read all information and instructions provided in this operations guide. Retain this operations guide. Heed all warnings and cautions printed in this operations guide. Follow all instructions in the order that the...
Page 8 - center insulator) the right channel audio to the RIGHT connector
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 PWR Indicator This LED (green) is illuminated when 24VDC via the Cresnet connector is supplied to the CNAMPX-2X60. NET Indicator This LED (yellow) indicates that the SIMPL program currently loaded in the control system has a network device ...
Page 9 - CNAMPX-2X60 Front Panel Power Switch; CNAMPX-2X60 Front Panel; Leading Specifications; Leading Specifications of the CNAMPX-2X60; SPECIFICATION
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier CNAMPX-2X60 Front Panel Power Switch As shown below, the front panel of the CNAMPX-2X60 contains a power switch with an LED indicator. This two-position (ON/OFF) switch enables operating power to the CNAMPX-2X60 circuitry. It must be positi...
Page 10 - Setup; Network Wiring
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 Leading Specifications of the CNAMPX-2X60 (continued) SPECIFICATION DETAILS Crestron Application Builder™ Version 1.1 or later 1 SIMPL™ W indows® Version 2.00 or later 2 & 3 2-Series Control System Update Version C2-1001.CUZ or later 4 ...
Page 11 - Resistance Equation; WIRE GAUGE; Rack Mounting; To prevent bodily injury when mounting or servicing this unit in a
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier consideration. If Cresnet units are to be daisy-chained on the run, the power factor of each unit to be daisy-chained must be added together to determine the power factor of the entire chain. If the unit is a home-run from a Crestron system...
Page 12 - Due to the heat dissipation of the CNAMPX-; Hookup; not; Refer to “Network Wiring” on page 6 when making connections to the
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 CAUTION: Due to the heat dissipation of the CNAMPX- 2X60 (and all audio amplifiers in general), allow at least one free rack space above and below the CNAMPX- 2X60 for proper circulation. NOTE: Reliable grounding of rack-mounted equipment s...
Page 13 - Hookup Connections for the CNAMPX-2X60 in Bridged Mode; Identity Code; Functions | Set Network ID; Set ID; Current Network Devices; Close
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Hookup Connections for the CNAMPX-2X60 in Bridged Mode I NP U T S S U M M I N G S T B R I D GE D RIGHT BRIDGED ATTENTION: POUR LA PROTECTION CONTRE LES RISQUES BRIDGED + – D'INCENDIES N'UTILISEZ SEULEMENT LE MÊMES TYPE DE FUSIBLE. DÉBRANCHE...
Page 14 - The new NET ID code may also be verified by selecting; Report Network Devices; Repeat this procedure for each CNAMPX-; Typical Room Configuration; Programming with SIMPL Windows; The next three sections describe a CNAMPX-; Configure CNAMPX-2X60 Program
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 NOTE: The new NET ID code may also be verified by selecting Diagnostic | Report Network Devices in the Viewport. 10. Repeat this procedure for each CNAMPX- 2X60 to be added to the Cresnet system. Typical Room Configuration The following fig...
Page 15 - Any software that uses the CNAMPX-16X60 symbol, including SIMPL
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Configure CNAMPX-2X60 Program DEVICE SYMBOL DROP ADDITIONAL LIBRARY REQUIRED WHERE SETUP Control Systems Desired control system System Views Refer to the documentation supplied with the specific control system for additional setup informati...
Page 16 - CNAMPX-2X60 Symbol Input Signal Descriptions; INPUT; Enable_Temp_Rpt This signal selects whether or not the; OUTPUT; This; Example Program; Any software that uses the CNAMPX-12X60 symbol, including SIMPL
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 CNAMPX-2X60 Symbol Input Signal Descriptions INPUT DESCRIPTION Main_Power This signal activates the main operating power to the CNAMPX-2X60 circuitry. High/1=power onLow/0=power off Enable_Temp_Rpt This signal selects whether or not the Tem...
Page 17 - Problem Solving; Troubleshooting; CNAMPX-2X60 Troubleshooting; TROUBLE; Grounding problem. Either connect or remove chassis ground
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Problem Solving Troubleshooting The table on the next page provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CNAMPX-2X60 Troubleshooting...
Page 18 - AC Power Fuse Replacement; The AC power fuse replacement of the CNAMPX-2X60 does; require cover; Further Inquiries
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 AC Power Fuse Replacement The AC power fuse replacement of the CNAMPX-2X60 does not require cover removal and can be performed with the unit installed in an equipment rack. CAUTION: Refer to the table below. Use only the listed fuse for eac...
Page 19 - Software License Agreement; LICENSE TERMS; r backup copy; OTHER LIMITATIONS
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which incl...
Page 20 - PROPRIETARY RIGHTS; Copyright; GOVERNING LAW; apply to this Agreement.; CRESTRON LIMITED WARRANTY
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformi...
Page 21 - Return and Warranty Policies; Merchandise Returns / Repair Service
Crestron CNAMPX-2X60 2 Channel Professional Audio Amplifier Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the fa...
Page 22 - This page intentionally left blank.
2 Channel Professional Audio Amplifier Crestron CNAMPX-2X60 This page intentionally left blank. 18 • 2 Channel Professional Audio Amplifier: CNAMPX-2X60 Operations Guide – DOC. 8178
Page 24 - Specifications subject to
Crestron Electronics, Inc. Operations Guide – DOC. 8178 15 Volvo Drive Rockleigh, NJ 07647 01.02 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
