Crestron C2N-RMAK - Manual
Crestron C2N-RMAK – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – 5 Volvo Drive
- Page 3 – Rack Mounting Kit; Description; The C2N-RMAK is a mounting kit used for mounting the Crestron; This mounting kit may also be used for future devices.
- Page 4 – Assembly; Rack Mounting Plate Only; Tools/hardware required; Wrench or nut driver
- Page 5 – Rack Mounting Plate and Extension Brackets; mounting holes as shown in the following diagram.
- Page 6 – Further Inquiries; Check the Crestron website (
- Page 7 – Return and Warranty Policies; Merchandise Returns / Repair Service
Crestron
C2N-RMAK
Rack Mounting Kit
Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.
Crestron C2N-RMAK Rack Mounting Kit Rack Mounting Kit: C2N-RMAK Description The C2N-RMAK is a mounting kit used for mounting the Crestron ® C2N-NPA8 Network Poll Accelerator or the C2N-SPWS300 Power Supply on a rack plate for installation in an equipment rack. The table below lists all parts include...
Rack Mounting Kit Crestron C2N-RMAK Assembly To allow shorter cable runs between adjacent devices in a rack, devices can be attached directly to the rack mounting plate or to extension brackets that attach to the rack mounting plate. Mount the device directly to the rack mounting plate when mounting...
