Creative CB3700 - Manual

b. Using the Auto-connect Pairing Button

To pair your USB adapter to a Bluetooth-enabled keyboard or mouse, using the

Auto-connect pairing

button, do the following:

These steps are for Windows XP or Windows 2000 only.

1.

Make sure that your Bluetooth-enabled keyboard or mouse is in

Discoverable

mode.

For more information, refer to your keyboard or mouse's User's Guide.

2.

Press and hold the

Auto-connect pairing

button on your USB adapter until

the

Power/Activity

LED blinks blue.

3. When the

Bluetooth Device Selection

dialog box appears on the screen, your

USB adapter will detect your Bluetooth-enabled mouse or keyboard.

4.

To pair to your keyboard

The Bluetooth Security Setup dialog box will appear once your keyboard is
detected. On the

PIN Code box

, a keyboard pairing pin is displayed. Type the

pin in the

PIN Code box

, and press the

<Enter>

key. The

Bluetooth

icon

on the taskbar turns green.

To pair to your mouse

The

Confirmation Required

dialog box will appear once your mouse is

detected. Follow the instructions and click the

Click here

button. The

Bluetooth

icon on the taskbar turns green.

Your computer's USB port may be located on the front panel. If your USB adapter does
not fit into the USB port located on the back panel, connect it to the USB port located
on the front panel.

Quick Start

1

1

Installing Your USB Adapter

Before you install your Creative Wireless Adapter CB3200/CB3700, take note of
the Bluetooth Device Address (BDA) found on a label on your USB adapter.
You need them later to verify your Bluetooth installation and pair your Bluetooth
devices.

DO NOT

connect the USB adapter to your computer before installing the

software. You will be required to do so halfway through the installation.

1.

Turn on your computer and insert the Installation CD into your
CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not,
follow the steps below:

i)

Double-click the

My Computer

icon.

Alternatively,

click

Start

→

My Computer

.

ii)

Right-click

the

CD-ROM/DVD-ROM drive

icon, and then click

AutoPlay

.

2.

Follow the instructions on the screen to install the Bluetooth Software.

3. When

the

Bluetooth Device Not Found

dialog box appears, click the

Cancel

button.

4. Click

the

Finish

button.

5.

When prompted, restart your computer.

6.

Connect your USB adapter to your computer's USB port.

Windows 98 and 98 SE users may be prompted by an

Add New Hardware Wizard

dialog

box when Microsoft® WIndows® detects your USB device. Follow the instructions on the
screen. You may need to insert the Windows Installation CD into the CD-ROM drive during
installation. Some computers may be supplied without the Windows CD, but have the
necessary files stored in

c:\windows\options\cabs

(replace

c:\

with the drive letter your

Windows has been installed on).

The

My Bluetooth Places

icon appears on your computer’s desktop and

system tray.

For Windows XP Service Pack 2 only

1.

When the

Found New Hardware Wizard

dialog box appears, select

No, not

this time

and click the

Next

button.

2.

Select

Install from a list or specific location (Advanced)

and click the

Next

button.

3.

Select

Don’t search. I will choose the driver to install

and click the

Next

button.

4.

Select

CB3200/CB3700 Creative Wireless Adapter

and click the

Next

button.

5. Click the

Finish

button. Your USB adapter should appear under

Bluetooth

Devices

in Device Manager.

2

2

Configuring Your Bluetooth
Device

3

3

Verifying Your Bluetooth
Installation

1. On your taskbar, right-click the

Bluetooth

icon, and select

Advanced

Configuration

.

The

Bluetooth Configuration

dialog box appears.

2. Click the

Hardware

tab. The

Bluetooth Configuration

dialog box appears.

3. In the

Device Properties

box, check the device status and device address.

The device should be indicated as working properly and the device address
should match the BDA, found on a label on your USB adapter.

1.

On your taskbar, right-click the

My Bluetooth Places

icon

, and select

Start Using Bluetooth

.

The

Initial Bluetooth Configuration Wizard

dialog box appears.

2.

Follow the instructions on the screen to complete the configuration.

3.

When you are prompted to install another Bluetooth device, click the

Skip

button.

4. Click

the

Finish

button.

Bluetooth is a registered trademark of the Bluetooth SIG, Inc., USA. Windows is a registered trademark of Microsoft
Corporation. Information in this document is subject to change without notice and does not represent a commitment on
the part of Creative Technology Ltd. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of
Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used
or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any other
medium except as specifically allowed in the license agreement. The licensee may make one copy of the software for
backup purposes. Copyright © 2005 Creative Technology Ltd. All rights reserved. Version 1.0 February 2006.

You can find Customer Support Services, Warranty and other information in the Installation CD.

Creative Knowledge Base

Customer Support Services & Warranty

(replace

d:\

with the drive letter of your CD-ROM/DVD-ROM drive,

<region>

with the region you are

in,

<model>

with the product model, and

<language>

with the language that the document is in).

Customer Support Services

d:\support\<region>\<language>\support.chm

Warranty

d:\warranty\<region>\<language>\warranty.chm

Please keep your Proof of Purchase for the duration of the
Warranty period.

Regulatory

d:\fcc\<model>\doc.chm

User's Guide

d:\manual\<language>\manual.pdf

Registering your product ensures you receive the most appropriate service and product support
available. You can register your product during installation or at

www.creative.com/register

.

Please note that your warranty rights are not dependent on registration.

Resolve and troubleshoot technical queries at Creative's 24-hour self-help Knowledge Base.
Go to

www.creative.com

, select your region and then select

Support

.

Product Registration

Keep this document for future reference.

About Your Creative Wireless Adapter
CB3200/CB3700

Thank you for choosing the Creative Wireless Adapter CB3200/CB3700.
Your USB adapter is easy to set up and supports wireless transfer rates of up to 3 Mbps*.
Your USB adapter adds Bluetooth technology to your computer and can be paired
with other Bluetooth-enabled devices.

USB connector

Connect this to your computer's USB port.

Power/Activity LED

Turns on when your USB adapter is
successfully installed and connected to your
computer. When blinking blue, the USB
adapter is transmitting or receiving data.

Auto-connect pairing button

* May vary depending on actual operating environment and mode. Effective throughput of up

to 2.1 Mbps.

CB3700 (Black strap) - Class 1 ( Wireless range up to 100m)
CB3200 (Silver strap) - Class 2 ( Wireless range up to 10m)

4

4

Pairing Your USB Adapter to Other Bluetooth-Enabled Devices

a. Using My Bluetooth Places Application

To pair your USB adapter to Bluetooth-enabled devices using

My Bluetooth

Places

, do the following:

1.

On your taskbar, double-click the

My Bluetooth Places

icon .

The

My Bluetooth Places

window appears.

2. Double-click

the

Find Bluetooth Devices

icon.

For

Windows

XP

only:

In the

Bluetooth Tasks

box, click

View devices in range

.

3. In

the

Entire Bluetooth Neighborhood

dialog box, double-click the

Bluetooth-enabled device that you want to pair to.

4.

Follow the instructions on the screen.

For more information on

My Bluetooth Places

, refer to the User's Guide (on CD).

If prompted for a Bluetooth pin code, enter the pin code of the
Bluetooth-enabled device that you are pairing your USB adapter to.

P/N: 235-10263

You need to pair your USB adapter for it to work with other Bluetooth-enabled devices.