Crate fxt120 - Manual

Crate fxt120 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – IMPORTANT SAFETY INSTRUCTIONS; CAUTION; Guitar Amp with DSP & Channel Tracking; mation contained in this manual before you begin playing.; And thank you for choosing; CR
Page 3 – The Digital Signal Processor:; The effects are described below:; • Select the Clean channel. Set the DSP Selector to “FLNG 1”; for the Clean channel is now saved to memory); • Select the Overdrive channel, Gain 2. Set the DSP Selector to “T-WAH”; the Overdrive channel, Gain 1 is now saved to memory); • Reselect the Clean channel; (the setting for the Overdrive channel, Gain 2 is now saved to memory)
Page 5 – Connecting to the Insert jack:
Page 7 – System Block Diagram:
Page 8 – FXT120 TECHNICAL SPECIFICATIONS:; Declaration Of Conformity; SLM Electronics; Complies with the following Standards:

Loading the manual

XT120

Guitar Amplifier with

Digital Signal Processing

and Channel Tracking

User’s Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; CAUTION; Guitar Amp with DSP & Channel Tracking; mation contained in this manual before you begin playing.; And thank you for choosing; CR

IMPORTANT SAFETY INSTRUCTIONS • READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS. • DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FORPROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIRFLOW...

Page 3 - The Digital Signal Processor:; The effects are described below:; • Select the Clean channel. Set the DSP Selector to “FLNG 1”; for the Clean channel is now saved to memory); • Select the Overdrive channel, Gain 2. Set the DSP Selector to “T-WAH”; the Overdrive channel, Gain 1 is now saved to memory); • Reselect the Clean channel; (the setting for the Overdrive channel, Gain 2 is now saved to memory)

The Digital Signal Processor: 3 F XT120 Guitar Amp with DSP & Channel Tracking The FXT120’s Digital Signal Processor provides 16 exciting digital effects. Use the DSP Selector con-trol to choose the desired effect, then use the DSP Level control to mix in the desired amount of effect. The effect...

Page 5 - Connecting to the Insert jack:

18: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switchdepressed). The switch illuminates when the power is on. 19: ELECTRONIC TUNER (top panel): The electronic tuner is active whenever the amplifier is truned on, pro-viding constant, “real tim...