Craftsman 71-24831 - Manual
Craftsman 71-24831 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – tractor. If you removed bolts as shown in figure 1a,; REMOVE BOLTS; parTS ShowN IN Gray are SuppLIed wITh The KIT.
- Page 3 – SPACER
- Page 4 – • Remove and store the mower stop bracket and bolt; REMOVE
- Page 5 – RIGHT SIDE VIEW
- Page 6 – BOTTOM; • Slightly loosen the hex bolt next to the upper idler; HEX BOLTS; VIewed froM BoTToM
- Page 7 – of the tractor drawbar to the rear of the tractor frame.; Tighten all loose bolts at this time.; WEIGHT TRAY
- Page 8 – Your Home; in your home; For expert home solutions advice:; Our Home; Sears Parts & Repair Service Center; Call anytime, day or night
Instruction Manual
Model No.
71-24831
SNow Thrower KIT
®
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
A
B
C
F
SHOWN ACTUAL SIZE
D
E
ref qTy
parT No
deScrIpTIoN
A
2
43087
3/8" x 1-1/4" Hex Bolt
B
14
43001
3/8" x 1" Hex Bolt
C
4
43350
3/8" x 1" Carriage Bolt
ref qTy
parT No
deScrIpTIoN
D
12
HA21362
3/8" Nylock Nut
E
12
43003
3/8" Lock Washer
F
2
23625
Spacer
hardware pacKaGe coNTeNTS
ref qTy
parT No
deScrIpTIoN
1
2
25301
Frame Bracket
2
1
64943
Front Hanger Bracket, L.H. 54"
3
1
64944
Front Hanger Bracket, R.H. 54"
ref qTy
parT No
deScrIpTIoN
4
1
63571
Hanger Bracket, L.H.
5
1
63572
Hanger Bracket, R.H.
6
2
26557
Mounting Bracket
7
1
26556
Side Plate, R.H.
1
3
5
6
4
2
7
carToN coNTeNTS
PRINTED IN U.S.A.
FORM NO. 41039 (06/19/08)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE uSe The foLLowING INSTrucTIoNS IN pLace of STepS #1 Thru #46 IN The SNow Thrower MaNuaL. FIGURE 2a RIGHT SIDE VIEW STep 2: (See fIGure 2a or 2b)• Attach the R.H. side plate (supplied with the kit) to the tractor. If you ...
3 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE FIGURE 5 RIGHT SIDE VIEW FIGURE 4 RIGHT SIDE VIEW STep 5: (See fIGure 5)• Assemble the R.H. hanger bracket to the bottom hole where the mower stop bracket was removed and to the upper hole under the front of the foot res...
4 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE FIGURE 8 RIGHT SIDE VIEW STep 8: (See fIGure 8)• Assemble a frame bracket to the R.H. foot rest. Use two 3/8" x 1" hex bolts and two 3/8" lock washers. • Assemble a shoulder bolt (P) and a 3/8" flanged nu...
