Cortelco 879015-TP2-27S - Manual

- 5- INTRODUCTION TO CALLER ID INSTRUCTIONS Read this manual carefully before using this product . Congratulations on your purchase of this product! The unit allows you to take advantage of the Caller Identification service that may be offered by your local telephone company. Not all local telephone...

- 7- 26. Handset Hanger - Holds the handset in place when the telephone is mounted on a wall 27. To Handset – Insert coiled cord from handset here 28. Battery Compartment – Optional - 3 size ‘AAA’ (UM-4) alkaline batteries 29. Speaker – For speakerphone mode 30. Memory Index - Write down names and n...

- 8- INSTALLATION Power Supplies This unit is designed to operate from an AC-DC adaptor with a 9VDC 100mA output. This may be supplemented with 3 x 1.5V ‘AAA’ (UM-4) batteries for backup to maintain the caller ID memory during line power interruption. A. Operating from the AC-DC Adaptor This unit sh...

- 9- Connecting the Telephone Line Cords One coiled handset cord and a long straight telephone line cord are packed with this unit. Insert one modular plug of the coiled cord into the handset jack and the other plug into the jack on the left side of the base. Similarly, insert one modular plug of th...

- 13- Reset your phone If you cannot set up your phone or if the display is blank or erratic or the New Call Indicator stays on continuously, your phone may have received a pulse of abnormal voltage from the phone line. To reset the product, simply uninstall all batteries and unplug the AC adaptor f...

- 14- TELEPHONE OPERATION Ringer On/Off Switch (#21) ON - Ringer sounds to alert you to incoming calls. OFF - Ringer does not sound to avoid being disturbed by incoming calls. Tone/Pulse Switch (#22) The PULSE position is used if your local telephone system only offers Pulse (rotary dial) service or...

- 15- Flash Button (#4) For residential phone systems with “Call Waiting Service”, instead of pressing the Hookswitch to pick up the other call, press the Flash Button. This will automatically send the correct signal to the telephone company to switch calls. The amount of time you hold the Flash But...

- 17- MEMORY OPERATION Using the Memory Keys When the phone is in on hook state, you can save up to 13 speed dial numbers (3 one-touch and 10 two-touch of 24 digits each without name). To save a number to the one-touch memory key (M1 – M3) In idle state, press “PROG”. Display shows ENTER NUMBER. Ent...

- 18- out. If the memory is empty. Display shows KEY IS EMPTY for 2 sec and exits to off hook state. To predial from a memory key Press the one-touch Memory key (M1-M3) or “MEM” + digit key (0-9) which contains the number you want to dial out. Display shows the number. If the memory is empty, displa...

- 20- To leave the Callers List at any time, press Menu or wait 12 sec (5 sec if at END OF LIST) to exit to idle state. To delete all items in the Callers List By pressing ▼▲ key to enter the Callers List. Press Delete for 5 sec. Display shows DELETE ALL? Press Delete again to confirm deletion of th...

- 23- Message Waiting does not work Check with your telephone company if this service is available or if you have subscribed to it. Pressing a Memory button does not display number Your Memory button has no stored number. Please store the number again by pressing the PROG Button, dialing the number ...

- 24- LIMITED WARRANTY If you purchased this product new in the U.S. or Puerto Rico, CORTELCO warrants it against defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty is in lieu of all other express warranties. During the warranty period,...