Cortelco 2194**VOE27S - Manual

T ELEPHONE U SAGE SET UP/INSTALLATION 1. Connect the adapter. Plug the large part of the adapter into the wall outlet and the adapter tip to the jack at the rear side of unit. (Use only 9V DC. 200mA, centerpositive Class 2 adapter.) 2. Connect the telephone line cord. a. To connect without an answer...

WALL MOUNT INSTRUCTIONS 1. Install wall mount bracket in wall mount position and route cords as shown in diagram below. 2. Connect the adapter and the line cord. See Steps 2 & 3 on preceding page for specific instructions. 3. Push out the handset hook and reattach in opposite direction for the w...

After the adapter is connected, the display will show as indicated below for setting. 1. [ SET LANGUAGE ] appears on the display. Press the REVIEW UP ( ) button to select the language. E - English, F - French, S - Spanish, and then press the DIAL button to confirm the selection. 2. When [ LCD CONTRA...

No matter whether you answer the call or not, the Call Waiting Caller ID will store the callinformation for future reference. Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller IDservice from your local telephone company. If you only have Caller ID service, the unitworks f...

1. This unit will check your line for a stutter dial tone every time you hang up or eachtime a call goes unanswered. The MESSAGE indicator will flash when there is a message waiting. 2. You may experience some delay in seeing the MESSAGE indicator light up even though there are messages in your rnai...

MESSAGE ERROR • The display indicates [ -ERROR- ] ” if your unit receives a call that has an error in the transmission or reception. NO DATA SENT 1. [ -NO DATA SENT- ] will be displayed if there is no caller ID (CID) number sent from the telephone company while ringing. PRIVATE CALLS • If the caller...

UNKNOWN CALLS • When the telephone company is unable to provide information of the caller stelephone number, [ UNKNOWN NUMBER ] and his name will alternately display on the screen when this information is received. • When the telephone company is unable to provide information of the caller s name,[ ...

T ELEPHONE S ERVICE P ROBLEMS If you have any problems with your telephone equipment service , determine if the problem is with your unit or the telephone company lines. BEFORE CALLING THETELEPHONE COMPANY, be aware that they may charge you for a service call if theproblem is caused by your telephon...

MESSAGE ERROR HAPPENS FREQUENTLY 1. Caller information was not transmitted properly. Check with your telephonecompany to see if there is a problem with your phone line. Since our special design will always retain your stored call records, weencourage you to disconnect all the telephone cords and ada...

T ELEPHONE R EPAIR DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF . Call Waiting Caller ID Telephones manufactured by CORTELCO must be returned to us for repair. You can return your telephone to CORTELCO for repair or replacement in accordance with our LIMITED WARRANTY. CORTELCO warrants THIS PRODUC...

FCC I NFORMATION DESIGN COMPLIANCE Your telephone is designed to comply with FCC Rules and Regulations, Part 68. It can be connected to the telephone network as FCC-registeredterminal equipment. The registration number is printed on the label on the bottom of yourtelephone. NOTIFICATION TO THE TELEP...

I NDEX A N, O V Area Code 6 Options 15 Volume 10 Adjusting volume 10 One-touch dialing 10 B,C P W, X, Y, Z Call Waiting 11 Part Identification 7 Warranty 25 Callback 15 Pulse dialing 8 Caller ID Features 12 Pause 10 Private Calls 17 D Deleting calls 14 Q, R Dialing Mode Receiving calls Choosing 8 Te...