Cornelius P/N 629088733 - Manual
Cornelius P/N 629088733 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
IDC Icemaker Adaptor Kit Installation Instructions
© 2006, IMI Cornelius Inc.
- 1 -
Publication Number: 629088733INS
INSTALLATION INSTRUCTIONS
IDC I
CEMAKER
A
DAPTOR
K
IT
FOR
P/N 629088733
1.
Place ice slide into ice drop opening in
bin (see FIGURE 2).
2.
Place bar into first set of pockets inside
the ice bin.
3.
Place Icemaker Adaptor Kit on top of
unit.
4.
Place icemaker on top of kit. DO NOT
slide icemaker into position on the lid.
5.
Apply continuous bead of NSF
international (NSF) listed silastic
sealant (Dow 732 or equivalent),
supplied in kit, to seal the icemaker to
the top of the adapter kit. All excess
sealant must be wiped away
immediately.
6.
Drill 9/64” diameter holes, using one of
the two supplied brackets as a
template, into the rear of the icemaker
and the rear of the icemaker adapter
kit. USE EXTREME CARE NOT TO
DRILL INTO ANY ICEMAKER
COMPONENTS!!! Secure the icemaker
to the adapter using the screws and
brackets provided.
7.
For optimal performance, do not fill ice
bin more than 2/3 capacity (maximum
fill is 4” below top of bin). Applies to IDC
255 models only.
FIGURE 1
FIGURE 2. Ice Slide Assembly
Icemaker
Adaptor
Kit
Bar
Ice Slide
Revision Date: May 4, 2006
www.cornelius.com
Revision: A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
