Cornelius 629088480 - Manual

Cornelius 629088480

Cornelius 629088480 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10

Table of Contents:

  • Page 2 – Thermostat Reset Upgrade Kit Installation Instructions; Installation Instructions; Remove the 4 screws holding contactor
  • Page 4 – DO; If preferred, use a; MUST BE; between the frame and hoses to
  • Page 5 – MUST; be on same side as flag terminals already attached to contactor
  • Page 7 – Correct
Loading the manual

Thermostat Reset Upgrade Kit Installation Instructions

© 2005, IMI Cornelius Inc.

- 1 -

Publication Number: 629088480INS

INSTALLATION INSTRUCTIONS

FCB Pinnacle 2 Flavor Emerson Units

T

HERMOSTAT

R

ESET

U

PGRADE

K

IT

P/N 629088480

IMPORTANT: This procedure is intended for use by a Qualified Service Technician.

IMPORTANT: This kit is intended to be a direct replacement of the existing safety circuit. If the
unit does not have a reset box on the back, call IMI Cornelius Service at 800-238-3600.

NOTE: Open the Cornelius web site www.cornelius.com, search for 629088480INS, and print the
instructions off in color.

Parts List

Tool List

Item

Description

Qty

1

Retro-Kit Enclosure Box (with wiring inside)

1

2

Hole Template

1

3

Short Thread-Cutting Screws (if needed)

6

4

Set of wire ties

1

5

Screws, 1 spare

3

6

Wiring Diagram – 620920907

1

7

7/8” Bushing (if needed)

1

8

Hex Nut

1

9

Harness, In-Rush Protection

2

10

Label, Hot Gas Error (not shown)

1

11

Brass Screws and S.S. Lock-washers (not shown)

4

Multi-Use Screwdriver

Wire Stripper/Crimper

1/4” Nut Driver

Needle Nose Pliers

Multi-meter

Set of Mixed Terminals (red male and female

AMP fastons, fully insulated)

Short Thread
Cutting Screws

Set of Wire Ties

Hole Template

Retro-Kit

Enclosure Box

In-Rush Protection
Harnesses

Screws

Bushing

Hex Nut

Wire Diagram

Release Date: June 30, 2005

www.cornelius.com

Revision: C

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Thermostat Reset Upgrade Kit Installation Instructions; Installation Instructions; Remove the 4 screws holding contactor

Thermostat Reset Upgrade Kit Installation Instructions Publication Number: 629088480INS - 2 - © 2005, IMI Cornelius Inc. Installation Instructions 1. Pull Pinnacle away from wall. DISCONNECT POWER FROM THE UNIT. Remove lower back panel. 2. Remove the 4 screws holding contactor box cover (bottom rear...

Page 4 - DO; If preferred, use a; MUST BE; between the frame and hoses to

Thermostat Reset Upgrade Kit Installation Instructions Publication Number: 629088480INS - 4 - © 2005, IMI Cornelius Inc. 8. Place hole template at lower left of back of frame. The dot sticker should be at the lower left of template. Line up edge of hole template to edge of frame, as shown, and clamp...

Page 5 - MUST; be on same side as flag terminals already attached to contactor

Thermostat Reset Upgrade Kit Installation Instructions © 2005, IMI Cornelius Inc. - 5 - Publication Number: 629088480INS 14. Remove contactor from box and connect main power and contactor harnesses, as shown. IMPORTANT – Main power MUST be on same side as flag terminals already attached to contactor...

Other Cornelius Models

All Cornelius Other