Cooper Lighting 12V AR111 - Manual
Cooper Lighting 12V AR111 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
9.45”
13.01”
17.14”
16.01”
13.01”
45º x 45º
Adjust
Double
Gimbal
6.69”
6.69”
Integral Low Voltage
Transformers
A ... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.
E ... Lamps
One (1) 12V AR111 lamp mounted in ad-
justable double gimbal. Lamp holder is in-
dividually removable and may be regressed
1” for additional cut-off. Lamp can accept
optical accessories. 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available for
lamp pulldown and extreme aiming.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 7.49” x 7.49”
COMBOLIGHT
®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
12V AR111
New Construction
Housing
Trimless
ORDERING INFORMATION
An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) 12V AR111 lamp.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 050108
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
75W and 100W magnetic transformers are remote and sold separately.
Configuration
C1
=
COMBOLIGHT
Recessed One (1) Light
Housing
N
=
New Construction
C
=
Chicago Plenum
C1
N
N
Lamp Type / Wattage Label
050A11
=
50 Watt max. AR111 12V
075A11
=
75 Watt max. AR111 12V
100A11
=
100 Watt max. AR111 12V
Power Supply
E
=
Electronic Low Voltage
Transformer
M
=
Magnetic Low Voltage
Transformer
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Insert Finish
N
=
Trimless
Trim Insert
N
=
Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
