Compaq SM-CMD3010 - Manual

5 Attaching the control panel 1. Insert the left side of the control panel into the shaft of the main unit.2. Push the panel to the left and insert the right side of it. 3. Press the right side of the panel until a “click” sound is heard. Detaching the front panel 1. Press the OPEN button on the fro...

6 Connection diagram Notes: - In spite of having any kinds of speaker system, use 4 ohms impedance of speaker to reduce thedistortion during high volume level. - Prohibit to make the conductors of auto antenna and ground touch with each other. - For your driving safety, please link your parking wire...

7 Panel controls Front panel 1. MENU button2. BAND button3. SOURCE button4. Cursor button 5. Microphone6. MUTE button7. USB slot8. APS/PLAY/PAUSE button 9. CLK/STOP button10. ST/RPT button11. LCD display12. VOL/ENTER knob13. OPEN button

8 Inner panel The front panel of this unit can be detached to show the inner panel with disk slot. Press EJECT button toopen the inner panel. To unload the disk press EJECT again To set the unit to the initial settings press RESET button. 14. SD-slot 15. RESET button16. EJECT button

10 General operations Reset the unitOperating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPENbutton, then press the RESET button with some sharp object to restore the unit to the original factorysettings. Power buttonPress SOURCE button on the fron...

11 Radio operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service isnot available in you area, the following service is not available, either. BAND selection Press BAND button on the panel or on the RC repeatedly to select your desired radio b...

12 - Hold UP/DOWN cursor buttons to store a station. To recall a station: - Select a band (if needed). - Press UP/DOWN cursor buttons to recall the stored station. Mono/Stereo selectionPress the ST/RPT button on the RC to select ST OFF (Mono) or ST ON (Stereo) mode. TA (Traffic Announcement) functio...

16 - VCD mode to choose sound mode: MONO L, MONO R, STEREO. Video system Press N/P/ANGLE button to choose video system: NTSC => PAL => AUTO. Selecting subtitle language (for DVD only)If DVD disc supports multi-subtitle playback, press SUB-T button on the RC repeatedly to switch among languages...

18 TV tuner To receive TV broadcasts, install the TV antenna.For receiving TV broadcasts, stop your car where there is noobstacle to broadcast. Channel SearchPress SOURCE button and press cursor buttons, then ENTER button(or touch the TV mode icon) to choose TV mode. Touch the screenonce at any plac...

19 Operating with System Menu To enter the System Setting Menu press MENU button (or press top right corner of the screen in Radiomode). You will enter Menu pages for Video Mode, Audio Mode and System Mode usingUP/DOWN/LEFT/RIGHT cursor buttons or touching the needed items Video ModeYou may adjust t...

20 MP3 overview Notes on MP3 - MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. - This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. - The unit can read MP3 files written in the format compliant with ISO 9660. However it does not supp...

21 System setup menu 1. Press the SETUP button on the RC to display the system setup menu. 2. Use LEFT/RIGHT cursor buttons on RC to select the desired menu: System setup, Language setup,Video setup.3. Press ENTER to enter it.4. Use the UP/DOWN cursor buttons to select the needed setting. 5. Press R...

22 Language setup OSD languageSelect the OSD language.Audio language Select the audio language (if DVD disc supports several audio languages).Subtitle languageSelect the subtitle language (if DVD disc supports several subtitlelanguages). Menu languageSelect the DISC menu language (if DVD disc suppor...

23 Accessories 1. Operating instructions2. Key3. Screw4. Mounting collar (Metal sleeve) 5. Wire connector6. Front panel case7. Trim plate (plastic frame) 1pc2 pcs2pcs1pc 2pcs (ISO and RCA)1pc1pc

24 Anti-theft system This unit is equipped with a slide-down detachable and mask panel. Panel can be detached and taken with you, helping to deter theft. Handling compact discs - Dirty, scratched or warped discs may cause skip ping or noise. - Handle the disc only by the edges. To keep clean do not ...

25 Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. The fuse is blown. If the power supply is properlyconnected to the car accessoryswitch the ignition key to "ACC". Replace the fuse. Disc cannot be loaded. Presence of CD disc inside the player. Remove the di...

26 Specification GeneralPower supply 12 V DC Current consumption 10 A Maximum power output 50 Wx4 channels Fuse 10 A Dimensions (L x W x H) 187 x 50 x 170 mm Supported storages DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC Supported formats DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG FM stereo ra...

53 12 , 10 50 4 10 ( ) 187 50 170 DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG FM 87,5 – 108,0 4 18 M 522 – 1620 12 3- TFT 16:9PAL/SECAM/NTSC480 x 234350 2 300:1 : 110 0 , : 120 0 20 – 20 87 RCA (2V) . .