Compaq S6035IL - Manual - manualsarea.com

Page 3 - iii; table of contents

Upgrading and Servicing Guide iii safety information.......................................................................... 1 opening and closing the pc............................................................. 1 preparing the pc....................................................................

Page 4 - iv

Page 5 - safety information; opening and closing the pc; preparing the pc; Start; Turn Off

Upgrading and Servicing Guide 1 safety information This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to earth, according to IEC 60950). WARNING: Please read “safety information” in the User’s Guide before installing and co...

Page 7 - removing a drive

Upgrading and Servicing Guide 3 replacing the front panel 1 Align the top of the front panel with the top of the chassis front. 2 Press the panel onto the chassis at the top and at each side near the bottom until the panel snaps into place. locating components inside the PC A Upper optical drive bay...

Page 8 - replacing or adding a drive

4 Upgrading and Servicing Guide 3 Release the drive from the chassis by lifting the tab ( 1 ) on the latch drive bracket, and then sliding ( 2 ) the drive partway out of the bay. (The latch drive bracket secures the drives in their respective positions in the chassis.) 4 Disconnect the power cable (...

Page 10 - adding memory; removing a memory module

6 Upgrading and Servicing Guide adding memory Your PC comes with random access memory (RAM), which temporarily stores data and instructions on your PC. The PC ships with one or more memory modules, but you can replace the existing memory module(s) with higher-capacity ones. The motherboard contains ...

Page 11 - removing an add-in card

Upgrading and Servicing Guide 7 2 The memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket ( B ). Push the module carefully and firmly into the slot, ensuring that the latches on both ends snap into place. 3 Set the chassis upright. 4 Comple...

Page 12 - installing an add-in card; replacing the battery

8 Upgrading and Servicing Guide 6 If you are not replacing the old add-in card with a new add-in card, close the open slot by inserting the metal slot cover into the opened slot. installing an add-in card 1 Align the edge of the add-in card with the slot on the chassis and gently but firmly press th...

Compaq S6035IL - Manual

Table of Contents:

Summary

Other Compaq Models