Coleman PM402511 - Manual
Coleman PM402511 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Units with broken or missing parts, without
- Page 10 – ADJUSTMENT; Illustration 1
- Page 11 – Figure 1; Standby; Utility Power
- Page 12 – Use tools with insulated handles.
- Page 14 – R Pushbutton used to scroll forward through the menus; and to increment set points.; Keep clear of all moving parts at all times.; Generator Control Panel
- Page 15 – WA
- Page 17 – SCHÉMA DE CÂBLAGE 25KW (CONTRÔLEUR CP 500)
- Page 18 – SCHÉMA DE CÂBLAGE 25KW (CONTRÔLEUR CP 1000)
- Page 21 – How To Obtain Warranty Performance:
- Page 23 – LISTE DES PIÈCES \ LISTA DE PIEZAS
- Page 27 – COMBUSTIBLE; NOTE: Seal all connections with gas tape. Use 21⁄2 wraps
© 2003 ÂColeman Powermate, Inc. 12-03
Stationary Standby Electric Generator - 25,000 WATTS
IMPORTANT SAFETY INSTRUCTIONS – Please make certain that persons who are to install, operate and maintain
this equipment thoroughly read and understand these instructions prior to operation. SAVE THESE INSTRUCTIONS
— This manual contains important instructions that should be followed during installation and maintenance of the
generator and battery.
Record the model and serial numbers of your generator below:
Model Number
____________________
Serial Number
____________________
Date Purchased
____________________
HELPLINE 1-800-445-1805
OWNERS MANUAL
MODEL: PM402511
Read and understand all safety precautions in this manual and other
manuals included with this product before installing, operating and maintaining this
equipment. Failure to comply with instructions in this manual could result in personal
injury, property damage, and/or voiding of your warranty. Coleman Powermate WILL
NOT be liable for any damage because of failure to follow these instructions.
WARNING:
200-2313 - Revision C
ENGLISH
PP. 1-32
FRANCAIS
pág. 33-52
ESPAÑOL
p. 53-72
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The National Electrical Code (NEC) requires the frame and external electrically conductive parts of the generator to be connected to an approved earth ground. Keep a fire extinguisher near the generator at all times. Extinguishers rated "ABC" by the National Fire Protection Association are a...
NATURAL GAS (NG) SETTINGS Units are tested with natural gas before they leave the factory. If natural gas is to be used, no adjustmentsare required. The fuel select switch, located on thebottom of the control panel, should be in the (NG)position. The (NG) position is with the switch depressedaway fr...
This generator must be connected to an automatic transfer switch. The automatic transfer switch detectswhen a power failure occurs and automatically starts theengine to provide generator power. When the utilitypower becomes available, the transfer switchautomatically shuts down the generator and swi...
