Page 2 - Contents; Do not store or use gasoline or other
2 DANGER • FOR OUTDOOR USE ONLY. NEVER operate grill in enclosed areas, as this could lead to gas accumulating from a leak, causing an explosion or a carbon monoxide buildup which could result in injury or death. DO NOT use in garages, breezeways, sheds or any enclosed area. • NOT FOR USE BY CHILDRE...
Page 3 - Follow these safety rules before each use:; General Installation; WARNING
3 • Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1 (USA),Natural Gas and Propane Installation Code, CSA B149.1 (Canada), orPropane Storage and Handling Code, CSA B149.2 (Canada). • To check local codes, see your local...
Page 4 - CAUTION; Electrical Attachments
4 Longer detachable power-supply cords or extension cords must be used with care. The marked electrical rating of the cord set orextension cord must be at least as great as the electrical rating ofthe appliance. If the appliance is of the grounded type, theextension cord should be a grounding-type 3...
Page 5 - Cylinder Specifications; Hose and Regulator; Transporting the Cylinder
5 DANGER • DO NOT insert any foreign objects into the valve outlet. You may damage the valve. A damaged valve can cause a leak,which could result in explosion, fire, severe personal injuryor death. WARNING • Cylinders must be stored outdoors out of the reach of children and must not be stored in a b...
Page 7 - Grill Features — 8400 Series
7 1 3 4 7 10 9 8 13 6 2 1. Grill Hood 2. Thermometer 3. Hood Handle 4. Side Burners 5. Control Knobs: Side Burners 6. Side Shelf 7. Electronic Igniter: Right Main Burners and Side Burners 8. Drip Trays 9. Cart with Doors 10. Convection Vents 11. Control Knobs: Main Burners 12. Electronic Igniter: Le...
Page 8 - Replacement Parts List — 8400 Series
Replacement Parts List — 8400 Series 8 Grill Rotisserie Kit (not shown) 9992-557 8400 Series Grill Rotisserie Kit Grill Gas Conversion Kit (not shown) 9992-237 8400 Series LP to NG Conversion Kit
Page 10 - Cart Brace Installation; Grill Assembly — 8400 Series; — Battery Powered 1/4” Hex Nut Driver; Right Side Shelf Attachment
Cart Brace Installation 1. Open the left grill door. The two cart braces will be installed at anangle from the cart base to the back side of the compartment.The top end has a tab with a hole in the center. The bottom endhas two protruding tabs. 2. Insert the two protruding tabs into the pair of slot...
Page 11 - Left Side Shelf Attachment
1. Place a piece of styrofoam from the packaging in the grill toleave the grill hood propped open slightly (Fig. 12). Left Side Shelf Attachment Grill Assembly — 8400 Series Fig. 13 Fig. 14 Fig. 15 Fig. 16 11 Fig. 12 2. The left side shelf attaches to the left side of the grill (Fig. 13). 3. Secure ...
Page 12 - Side Burner Installation; Install the AA battery, negative end first.; NOTE: It does not matter which ignition wire goes to which tab
12 Grill Assembly — 8400 Series 1. Install the burners and caps (Fig. 17 and Fig. 18). Fig. 17 Fig. 18 Fig. 19 2. Install the grate over the burners (Fig. 19). Side Burner Installation Fig. 20 Igniter Battery Installation 1. The AA battery, spring and igniter cap must be installed beforeusing (Fig. ...
Page 13 - Interior Parts Installation; Heat Shield
13 Grill Assembly — 8400 Series Fig. 26 1. Insert the row of six heat tents with the triangle ridgesfacing up (Fig. 22). Notice that the heat shields that arewelded underneath the heat tents are placed toward theback of the grill (Fig. 23). Interior Parts Installation Fig. 22 Fig. 24 Fig. 25 2. Inst...
Page 14 - “OFF”; During assembly; LP Cylinder Installation; Natural Gas Installation”
14 IMPORTANT! T O ENSURE PROPER GAS FLOW , BURNER CONTROL VALVES MUST BE “OFF” BEFORE OPENING THE GAS CYLINDER VALVE . WARNING: During assembly of the grill and when attaching orreplacing the L.P. gas cylinder,insure that the gas supply hose isfree of kinks and/or damage andis at least 3 inches away...
Page 16 - Natural Gas Installation — 8400 Series; LP Cylinder Installation”; MUST
16 NATURAL GAS CONVERSION KIT (not shown) Part Number Description 9992-237 8400 Series LP to NG Conversion Kit Natural Gas Installation — 8400 Series NOTE: This step applies to you only if you are converting your 8400 Series grill to use NATURAL GAS. If you will be using your grill with LP GAS, this...
Page 17 - DANGER; Leak Testing; How to Check for Leaks; Fixing A Fuel Leak
17 DANGER T O P REVENT F IRE OR E XPLOSION H AZARD : • NO SMOKING. DO NOT use or permit sources of ignition in the area while doing a leak test. • Perform leak tests outdoors only.• NEVER perform a leak test with fire or flame. Leak Testing • If you detect a leak: 1. Turn off the fuel supply. Push i...
Page 18 - Lighting Instructions; REPRESENTATIVE ILLUSTRATION
18 1. Regularly check the burner venturi tubes for blockage from an insect nest. Read “Cleaning the Venturi” in the section titled “Care,Maintenance, and Cleaning”, and also the section titled“Troubleshooting”. 2. Check that all the burner venturi [H] are set over the valve outlets [J] correctly. Th...
Page 19 - Match Lighting - Side Burner; Match Lighting - Main Burners
19 Lighting Main Burners Lighting Side Burner 1. Push and turn the side burner control knob counterclockwise to the “HIGH” position. (Fig. 39) 2. Immediately press and hold the electronic igniter button (Fig. 39). You will hear a snapping sound. 3. If the burner does not light in 4 seconds, turn the...
Page 20 - Using the Rotisserie — 8400 Series; Electrical Grounding Instructions; Grill Rotisserie Kit
20 Using the Rotisserie — 8400 Series The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie burner is aninfrared type which provides intense searing radiant heat. Preferred by chefs over other cooking methods, this intenseheat sears in the natural ju...
Page 21 - Lighting the Rotisserie Burner; Match Lighting - Rotisserie Burner; Shutting Off the Grill
21 Lighting the Rotisserie Burner 1. Push and turn on the control knob for the ROTISSERIE BURNER counterclockwise to the “HIGH” position (Fig. 42 and 43). Wait 5 seconds. 2. Press and hold the electronic igniter button (Fig. 43). You will hear a snapping sound.3. If the burner does not light in 4 se...
Page 22 - Burner Control Setting Tips; Grilling Tips and Hints; General Use and Correct Burner Flames; Condition The Grill
22 Good Bad Yellow Blue Holes in Burner Yellow Blue Burner Control Setting Tips • The high flame setting is too hot for direct cooking. The high flame setting is good for quick searing of meat, then finishcooking on medium or low flame settings. • Use the high flame setting with the lid closed to pr...
Page 23 - Rear Infrared Burner Method:; Cooking Methods; DRIP TRAY; COOKING GRATES; REAR INFRARED BURNER:
23 Direct Method: • The heat source is directly below the food. • Use for browning meat or cooking hot dogs and hamburgers, but check food frequently. • Use for skillet and stir-fry cooking, but limit the amount of oil and heat to be used. • Cook roasts, turkey or duck on low heat. Place meat with w...
Page 24 - Steps For Cleaning Venturi:; Cleaning the Venturi; Care, Maintenance and Cleaning
24 REPRESENTATIVE ILLUSTRATION Steps For Cleaning Venturi: 1. Remove the cooking grates and the heat tents and set aside.2. Using a 1/4” hex nut driver, remove the self-tapping screws holding the front heat shield (Fig. 49 and 50). Set the front heat shield aside. 3. Using a 1/4” hex nut driver, rem...
Page 25 - Suggested Cleaning Materials:; Orifices; After moving the grill:; Moving and Storage; Possible Causes and Solutions:
CAUTION All cleaning and maintenance should be done only when the grill is cool & with the fuel supply turned off at the cylinder.If your grill is set up for use with Natural Gas, turn off thegas supply at the system manual shut off valve. Suggested Cleaning Materials: • Mild dishwashing liquid ...
Page 26 - TYPE 1 CONNECTION ILLUSTRATION; For Your Additional Safety; Troubleshooting
26 TYPE 1 CONNECTION ILLUSTRATION Thermal Sensitive Handwheel 1-5/16" Acme Connection Nipple with Excess Flow Valve Regulator YOUR NEW GAS GRILL IS EQUIPPED WITH ATYPE 1 CONNECTION DEVICE WHICH HAS 3SAFETY FEATURES (FIG. 55): 1. Proof of gas seal between the connector and the cylinder before gas...
Page 27 - PRODUCT REGISTRA; Coleman; COMPLETE THE ATTACHED REGISTRATION CARD AND RETURN WITHIN 10; PROMOTE BETTER PRODUCTS:
Please do not send other correspondence to the address belo w. PRODUCT REGISTRA TION DEP AR TMENT PO BO X 2931 WICHIT A ,KS 67201 A TTN: DEPT 586 IMPORTANT! Coleman ¨ Grill Warranty Registration Card COMPLETE THE ATTACHED REGISTRATION CARD AND RETURN WITHIN 10 DAYS TO RECEIVE THESE IMPORTANT BENEFIT...
Page 28 - CONGRATULATIONS ON YOUR NEW COLEMAN
7) Side burner (if applies) 8) Steamer/Fryer/Warmer (if applies) 9) Side table design 10) Color of the grill (not including stainless steel) 11) Warming racks 12) Dependable igniter 13) Size of the grill (available cooking square inches) 14) Integrated storage cabinet 15) Price16) Rotisserie (if app...
Page 29 - Notes
Page 32 - Coleman Gas Barbecue Grill 5/1 Year Limited Warranty; Warranty
The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A. 1-800-356-3612 • TDD: 316-832-8707 9992-033 (2/23/06) © 2006 The Coleman Company, Inc. All rights reserved. Coleman ® and are registered trademarks of The Coleman Company, Inc. Coleman Gas Barbecue Grill 5/1 Year Limited Warran...