Coleman 9805-230 - Manual
Coleman 9805-230 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Connect Frame to Tent
– Insert one Pole Tip into the grommet on the
webbing located at the corners of the tent (illus. 4).
– Go to opposite end of the same pole and
gradually apply pressure to the pole, forming an
arch, until you are able to insert the pole tip
into the grommet
– Attach the two Frame Clips at
the mesh vent to the pole
– Repeat for second pole
1
2
Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with door facing
desired direction. (illus. 1)
– For best results in windy conditions, postion
door or back of tent into the wind.
– Unzip door.
– Stake down tent corners. Keep the floor
taut.(illus. 2)
– Assemble Frame Poles by interlocking the
shock-corded sections. This will make two
long poles.
– Lay the poles out diagonally, centered on the
tent.The center of the poles should cross
forming an “X” in the middle of tent. (illus. 1)
– Fasten Toggle & Loop on top of tent over both
poles. (illus. 1), (illus. 3)
illus. 1
Toggle & Loop
illus. 2
Tent stake
through Loop
illus.4
Insert Pole Tip on
stake loop into pole.
illus. 5
Tent frame set-up
illus. 3
Toggle &
Loop
POLE ASSEMBLY PARTS
illus. 6
Frame Clips
a r i e s
™
2
part number 9805-230
Main Tent Poles (2)
Part No. 9805-1101
Rainfly
Part No. 9805-1151
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
