Coleman 9273A827C - Manual
Coleman 9273A827C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Attach Rainfly
- Page 3 – Fixez l’armature à la toile; Tioga Backpacker
- Page 4 – Attachez le double toit
Connect Frame to Tent
– Insert one end of main tent pole end
onto pin of pin & ring system, at tent
corner. (illus. 3)
– Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.
– Repeat for second pole.
Tioga Backpacker
™
1
Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with door
facing desired direction. (illus. 1)
– Unzip door.
– Stake down tent corners only, using the
rings at the end of the stake loops.
Keep the floor taut. (illus. 2)
– Assemble frame poles by
interlocking shock-corded poles.
This will make two long poles.
– Insert the poles diagonally into pole
sleeves. The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
2
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear of rocks,
branches and other hard or sharp objects.
– Do not set up your tent under trees.
– For best results in windy conditions,
do not position the door of tent into
the wind.
(1) Rainfly
Pole
Rainfly
Part No. 9273A2221
(2) Main
Tent Poles
POLE ASSEMBLY PARTS
Assembled
poles
inserted
through
pole
sleeves
Instructions apply to Part Number 9273A827C
illus. 1
illus. 3
Insert pole end onto
pin & ring
illus. 4
Tent frame
set-up
Part No. 9273A2231
Part No. 9273A2241
illus. 2
Tent stake
through ring
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Attach Tent to FrameUsing Frame Clips – Attach frame clips along the edges of tent to frame poles. (illus. 5), (illus. 6) – Make any adjustments to the tent corner stakes that are needed. 3 4 Attach Rainfly – Assemble rainfly pole by interlocking shock-corded pole. – Insert rainfly pole into reinfor...
Fixez l’armature à la toile – Introduisez le bout de l’un des mâts de la tente sur la cheville de l’ensemble chevilleet bague, au coin de la tente (ill. 3). – Allez à l’autre bout du mât puis arquez progressivement le mât afin de pouvoirintroduire la cheville dans le mât. – Agissez de la même façon ...
Fixez la toile à l’armatureà l’aide des crochets – Fixez les crochets des bords de la toile aux mâts de l’armature (ill. 5 et 6). – Ajustez, si nécessaire, les piquets des coins de la tente. 3 4 Attachez le double toit – Emboîtez les sections solidarisées du mât du double toit. – Placez les bouts du...
