Coleman 2000008916 - Manual

Main Roof Pole, grey
Side Roof Pole, black
Side Roof Pole, black w/Yellow mark
Front & Rear Roof Pole, black w/Green mark
Center Steel Leg Pole w/ red mark
Side Steel Leg Pole

2
2
2
2
4
4

1
2
3
4
5
6

5010000539
5010000539
5010000540
5010000540
N/A
N/A

5010000549
5010000549
5010000548
5010000548
5010000753
5010000761

MODEL 2000008916

Fig. 1

Pole

Sleeve

Fig. 2

Tent Stake

Stake Ring

1

2

3

4

Pole Connector

Top Pole

Leg Pole

Fig. 3

Fig. 4

Fig. 5

Pin

Leg

Pole

Fig. 6

Clip

Fig. 7

5

6

STITCH

LINE

6

• Insert top poles and leg poles into pole connectors.

(Fig. 3, Fig. 4 and 5)

• Insert the pin into each leg pole. (Fig. 6)

tEnt sEtup instructiOns

Before you begin

• Read all instructions before set up.

• Select a level site clear of rocks, branches, and other hard or

sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

• Do not set up your tent under trees because of potential lightning

strikes or falling tree limbs in inclement weather.

• Secure with

all

stakes and guylines provided to prevent property

damage or personal injury.

• For best results in windy conditions, position narrow end of tent

into the wind.

• Enlist the help of at least one other person to assist you when it

is time to assemble the tent.

pole Descriptions

Description

no.

Qty.

pole

repair Kit

pole

replacement Kit

1

3
4

2

Layout & Positioning

of Tent and Poles

Attach Tent to Leg Poles

Using Clips

Attach Rainfly

Connect Leg Poles

• Attach clips along the edges of tent to leg poles. (Fig. 7)

• Make any adjustments to the tent stakes, if needed.

• Drape rainfly over tent. (Fig. 8 and 9)
• Connect the elastic loops with “S” hooks to the leg

poles. (Fig. 10)

• Secure rainfly with straps located on the underside of

rainfly. (Fig. 11)

• Attach and stake out guylines. (Fig. 9)
HINT: During setup, keep door zipped to keep proper

tension on fabric.

(Continued on other side)

• Layout and position the tent with door facing desired

direction. (Fig. 1)

• Stake down tent corners first through the stake rings. (Fig. 2)

• Keep the floor taut.

• Stake down the remainder of the stake rings.

• Assemble all poles by unfolding and interlocking the shock-

corded pole sections.

• Insert the body poles into the pole sleeves.