Code Alarm CA 650 - Manual
Code Alarm CA 650 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – Using Your Remote Control; Arming the Security System; To engage valet mode:
- Page 4 – Using Your Remote Control, continued; Activating the Trunk Release Feature (Optional)
- Page 5 – Using Your Remote Vehicle Starter; Remote Starting Your Vehicle; To engage quick stop:; Stop the vehicle and place the transmission in PARK.
- Page 6 – Using Your Remote Vehicle Starter, continued; Operating the 2 / 3 Hour Start Up Timer Mode; To begin the 2 / 3 hour start up timer mode:; Turbo Timer; To engage the Turbo Timer feature:; Remote Start Safety Features
- Page 7 – Additional 2-Way LCD Remote Control Functions; Press LOCK to arm the system then within 3 seconds press LOCK again.
- Page 8 – LCD Remote Control ICON’s
- Page 9 – LED and Siren/Horn Indications
- Page 10 – Replacing Remote Control Batteries; Gently slide the battery cover off of the remote control.
- Page 11 – Emergency Override Procedure; Standard Emergency Override Procedure
- Page 12 – Code Systems, Inc. Limited Lifetime Warranty
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
Owner's Manual
CA 650
Remote Vehicle Control System
Vehicle Security and Remote Start
System with Two Way Confirming
LCD Remote Control
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents Using Your Remote Control .......................................................... 3 Arming the security systemPassive ArmingHidden alarm functionDisarming the security systemTwo stage door unlock*Automatic rearmValet mode Using Your Remote Control, continued .......................
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remotecontrol. The system will sound once and the parking lights will flash once, indicating the system isarmed. The doors will also lock at this time (if...
Using Your Remote Control, continued Activating the Trunk Release Feature (Optional) If this feature is enabled on your system, pressing and holding the TRUNK icon button on the remotecontrol for 2 seconds will open the vehicle’s trunk or hatch. Activating Optional AUX 1 (Optional) If this feature i...
