Code Alarm CA 411 - Manual
Code Alarm CA 411 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Remote Starting The Vehicle:
- Page 3 – TO BEGIN THE AUTOMATIC START TIMER:
- Page 4 – FUNCTION SETTING CHART; To be completed by installer
- Page 5 – Code Systems, Inc. Limited Lifetime Warranty
- Page 6 – FCC COMPLIANCE
Page 1
IMPORTANT NOTE: The operation of the Security and Convenience System as
described in this manual is applicable to most vehicles. However, due to the
configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more
information.
Remote Vehicle Starter
Owner's Manual
CA 411
Remote Vehicle Control System
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 This Remote Start Upgrade system can be wired to operate from any unusedbutton(s) from your transmitter. Please check with your installing dealer for whichtransmitter button is connected to your remote start system, and if you require asingle, double, or sequential press of the button(s) to o...
run timer if you complete any of the following: 1. Pressing the proper button or buttons of your transmitter whilerunning under control of the remote start system will turn the vehicle off. 2. Depress the vehicle's brake pedal. 3. Open the hood. 4. Move the red handled control switch to the OFF posi...
ADJUSTING THE START TIMER FROM 2 TO 4 HOURS: The SAFETY (Red Handled ) CONTROL SWITCH also allows you to select be-tween automatic 2 hour start or 4 hour start when using the automatic start timermode. The factory preset start up time for this mode is every 4 hours. To selectbetween 2 or 4 hour star...
