Page 2 - English; Thank you for purchasing this; Clarion; FCC Approval
2 OHM106/156 English Thank you for purchasing this Clarion product. • Please read this owner’s manual in its entirety before operating this equipment. • After reading this manual, keep it handy, such as in your glove compartment. • Save your sales receipt. The warranty at the end of this manual and ...
Page 3 - Contents
OHM106/156 3 English Contents 1. FEATURES ............................................................................................................. 42. PRECAUTIONS ...................................................................................................... 5 Installation .................
Page 4 - WA R N I N G
4 OHM106/156 English 1. FEATURES WA R N I N G The Clarion OHM106/156 overhead monitor system isdesigned strictly for rear-seat entertainment. Viewing themonitor while operating a motor vehicle can result in seriousinjury and/or property damage. Clarion is not responsible forany injury and/or propert...
Page 5 - Do not hang onto or hang items from the overhead monitor.; Installation
OHM106/156 5 English 2. PRECAUTIONS • Do not operate this product in ways other than those described in this manual. • Do not disassemble or modify this unit. You may damage the monitor, void thewarranty, and suffer electric shock. • Do not leave the monitor extended when you’re not using it. Direct...
Page 6 - Monitor closed (view looking up from directly below); View from rear car seat
6 OHM106/156 English 3. CONTROLS Monitor closed (view looking up from directly below) Monitor open View from rear car seat View from the side Thin FilmTransistor(TFT) screen Monitor housing Power button ON/OFF Door detect ON/OFF Main input select (AV1 - AV4) PIP - SWAP position SIZE Sub input select...
Page 7 - Remote control
OHM106/156 7 English Remote control *FM200 not included The remote control allows you to select programming and configure the monitor. Youcan adjust display options using the remote control buttons or the on-screen menus. Headphones Power Source selector Volume Fast reverse Next chapter Monitor powe...
Page 8 - Using the headphones; To hear the audio requires headphones.; If you’re replacing the batteries, remove the discharged; Setting the volume
8 OHM106/156 English 4. OPERATIONS This monitor works in conjunction with a DVD player or other video source mountedusually in the dashboard of your car. Headphones provide the audio. If your car is equipped with more than one audio/video source, such as a DVD and agame player, one person can watch ...
Page 9 - Opening the monitor; INPUT; Release button
OHM106/156 9 English An IR receiver in the headphones that is exposed to direct sunlight for an extendedperiod of time may cause poor sound quality. Let the headphones cool off before youuse them. Opening the monitor 1. Press the open button to release the overhead monitor. 2. Gently push down on th...
Page 10 - Changing image aspect ratio
10 OHM106/156 English Changing image aspect ratio A common display setting to change is screen mode, which controls the aspect ratioused to display images. To change the aspect ratio of the main screen, press MODE in the Main or Sub sections of the remote. Note: If you don’t select a mode, the syste...
Page 11 - Adjusting screen brightness
OHM106/156 11 English Notes: To switch video output from the main screen to the sub screen and viceversa, press SWAP in the Main section of the remote. The small sub screen can appear in any of the four corners of the mainscreen. To switch corners, press POS (position) in the Sub section of the remo...
Page 12 - Changing the battery in the remote control; The battery needs changing when the buttons stop working.; Changing the dome lights; Opening the light cover
12 OHM106/156 English Changing the battery in the remote control The battery needs changing when the buttons stop working. 1. Using a small screwdriver, pry open the transparent battery cover. Replacing the battery in the remote control 2. Replace the battery with the same type (Model CR2025) and sn...
Page 13 - INSTALLATION AND WIRING; What is included in the box
OHM106/156 13 English Removing the bulb 3. Replace the bulb with the same type bulb. 5. INSTALLATION AND WIRING Read these instructions and precautions carefully. Improper installation can damage themonitor and the vehicle. What is included in the box In addition to this manual, the box contains: • ...
Page 14 - Tools and additional components; A Phillips-head screwdriver when mounting the unit in the vehicle; Before you begin; the operation of the vehicle.; C AU T I O N; Mounting and wiring precautions
14 OHM106/156 English Tools and additional components You will need: • A Phillips-head screwdriver when mounting the unit in the vehicle • 4-6 screws to attach the ceiling bracket to the ceiling of the vehicle (not included) • High-quality RCA input-output cables Extra cable can cause signal loss an...
Page 15 - Installation procedure; Preparation; overhead monitor housing.
OHM106/156 15 English • A good chassis ground connection is critical to minimize resistance and avoid noiseproblems. Use the shortest wire possible and securely connect it to the car chassisand the source unit ground. • When routing RCA cables, keep them away from the power cables and outputspeaker ...
Page 16 - Install the ceiling bracket and cables; Screw the ceiling bracket to the beam or plywood.
16 OHM106/156 English Install the ceiling bracket and cables 1. Screw the ceiling bracket to the beam or plywood.
Page 17 - Install the monitor; Carefully hold the overhead monitor up to the ceiling bracket.
OHM106/156 17 English Install the monitor 1. Carefully hold the overhead monitor up to the ceiling bracket. 2. Insert both keys to help you align the mounting screw holes. Using the keys to hold the monitor in place 3. Screw in the screws making sure the wires are not in the way. Keys OHM.pmd 2006-0...
Page 18 - Locating all the screws and rubber caps
18 OHM106/156 English Locating all the screws and rubber caps 3. Remove the keys. 4. Cover the key holes and screws with the rubber caps provided. 5. Ground the black wire of the power harness to a clean ground spot. Note: Keep the ground wires from the monitor and the audio/video source asshort as ...
Page 19 - Wiring diagram
Page 20 - Saving your preferences; Accessing the on-screen display menus; MENU; To configure options, use the; ENTER; and arrow keys
20 OHM106/156 English 6. Saving your preferences Changes you make by pressing the buttons in the Main and Sub sections of the remotecontrol affect only your current viewing session. If you define your viewing preferencesusing the on-screen display (OSD) menus, the monitor stores your preferences so ...
Page 21 - Example: Setting options while using the monitor; three times to display the on-screen display menu.; Blend; to save this preference and exit the on-screen display menus.; Main menu; Controls picture-in-picture and split screen display; On-screen display menu; Returns to factory defaults; Settings
OHM106/156 21 English Example: Setting options while using the monitor The four on-screen display menus overlay whatever is currently playing on the monitor.You can configure the system to fade out the background of the OSD menus. With thisfeature enabled, you can continue watching whatever is playi...
Page 22 - On-screen display menus reference
22 OHM106/156 English On-screen display menus reference Main on-screen display menu Main picture menu Controls the display settings for the main picture. Setting Description Brightness Sets screen brightness. Contrast Adjusts the difference between light and dark areas. Hue Balance Adjusts the way e...
Page 26 - Controls how color displays on the screen.
26 OHM106/156 English Controls how color displays on the screen. Setting Value Description Color temperature Adjusts colors in combination. User Allows you to configure the mixture of red, greenand blue. 6500K Selects a pre-configured combination of the threecolors that could be described as “warm.”...
Page 29 - Sub picture overlays a portion of the main picture.
OHM106/156 29 English Controls the sub picture, also called the picture-in-picture. Setting Value Description PIP Mode Turns the sub picture on and off, and selects the style of sub picture. Off No sub picture. Single Sub picture overlays a portion of the main picture. PAP Both pictures split the sc...
Page 32 - System or DVD does not work; Make sure there’s a DVD in the DVD player.; Possible remedies; If the monitor does not respond:
32 OHM106/156 English 7. Troubleshooting System or DVD does not work 1. Turn on the ignition. 2. Turn on the DVD player. 3. Make sure there’s a DVD in the DVD player. 4. Press play on the remote control. Possible remedies If the monitor does not respond: • Check the fuses at the end of the monitor i...
Page 33 - WARRANTY INFORMATION
OHM106/156 33 English WARRANTY INFORMATION For USA and Canada only
Page 36 - Clarion Corporation of America
36 OHM106/156 English Clarion Corporation of America All Rights Reserved. Copyright © 2006: Clarion Corp. of America Printed in China OHM.pmd 2006-02-28, 13:00 36
