Clarion DSC920S - Manual - manualsarea.com

Page 2 - English; Contents; To receive Sirius Satellite Radio; CAUTION; INFORMATION FOR USERS:

2 DSC920S English Thank you for purchasing this Clarion DSC920S. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compar tment). ∗ Check the contents of the enclosed warranty card and keep...

Page 3 - Names of the Buttons and their Functions

DSC920S 3 English 3.CONTROLS [P-M] [SS] [DISP] [SCAN] [CAT] [BAND] [SAT] Names of the Buttons and their Functions [SAT] button • Used to turn the power on or off. [BAND] button • Used to switch the reception band. • Used to switch the Tuning mode (seek/ manual) when pressed and held for 1 secondor l...

Page 4 - Display Items; Operation status indication:

4 DSC920S English Display Items MANU (manual) indication SCAN indication CAT(category) indication SAT(satellite) indication PRESET indication BAND indication Preset channel indication (1 to 6) Operation status indication SAT (satellite) indication: • Lights in the SIRIUS mode, goes off in some other...

Page 5 - Turning the power on/off; Selecting a band; Preset memory

DSC920S 5 English 4.OPERATIONS Turning the power on/off 1. Press the [SAT] button to turn the power on/ off. When the power is turned on, “SAT” is dis-played in the Operation status indication andthen the display is changed to the channelbeing received. Verifying your Sirius ID 1. Press and hold the...

Page 6 - Scan function; Switching the text display; About the scrolling of the displayed text; Operations

6 DSC920S English ● Manual memory 1. Select a channel to be memorized. 2. Press the [P-M] button to enter the Preset memory mode. ∗ The reception channel number (“CH 051”) inthe Operation status indication blinks and thePRESET indication light. 3. Press the [ w ] or [ z ] button to select a pre- set...

Page 7 - Switching the screen saver

DSC920S 7 English Switching the screen saver 1. Press the [SS] button to switch the screen saver. Each time the button is pressed, thescreen saver is switched in the order of OFF ➜ SS1 ➜ SS2 ➜ OFF. ∗ If the screen saver is turned on and the buttonoperation is performed, the screen savermode is relea...

Page 8 - Before Installation; Power supply cord connection; Accessories

8 DSC920S English Before Installation 1. This set is exclusively for use in cars with a negative ground, 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “–” terminal before starting. This is to prevent short cir-cuits during installation. (Figure 1) 5.IN...

Page 9 - Installing location; Installation of the Control unit

DSC920S 9 English ■ Installing location Place the Control unit on the passenger’s seator stick the Velcro tape (large A) to the centerconsole. ∗ Before sticking the Velcro tape, clean the stickingsurface. ∗ Choose a location where the driving of a car is nothindered and the reception of the signals ...

Clarion DSC920S - Manual

Table of Contents:

Summary

Other Clarion Models