Cisco SF302-08MP - Manual
Cisco SF302-08MP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cisco 300 Series Managed Switches; Welcome; Package Contents; Mounting the Cisco Switch
- Page 3 – • High Ambient Temperature
- Page 4 – If your screws are not long enough to reattach the bracket; Wall Mounting; The switch should be mounted so that the ports face up or down.
- Page 5 – Connecting Network Devices; To connect the switch to the network:; Features of the Cisco 300 Series Managed Switch; for
- Page 6 – Repeat; Cisco strongly recommends using Cat5 or better cable for Gigabit; 00 Series Switches with Power Over Ethernet
- Page 7 – The switch can deliver a maximum of 15.4 Watts to any 10/100 or
- Page 8 – Before You Begin; Accessing and Managing Your Switch; Use the Web-Based Interface
- Page 9 – Switch Login Page; Getting Started
- Page 10 – Troubleshoot Your Connection; managed
- Page 11 – Possible Causes and Resolutions; Bad Ethernet connection:
- Page 12 – Front Panel Ports; The ports and LEDs are located on the front panel of the switch.
- Page 13 – Their LED status and indication are the same as on the RJ-45 ports.; Front Panel LEDs; LED; Reset Button; Returning the Device to the Factory Default Settings; Back Panel
- Page 15 – Where to Go From Here; Support; Cisco Support Community; Product Documentation; Warranty Information
- Page 16 – Americas Headquarters
Quick Start Guide
Cisco 300 Series Managed Switches
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Cisco 300 Series Managed Switches Welcome Thank you for choosing the Cisco 300 Series Managed Switch, a Cisco network communications device. This device is designed to be operational right out of the box as a standard bridge. In the default configuration, it will forward packets between connecting...
Cisco 300 Series Managed Switches 3 Do not deploy the device in a location where any of the following conditions exist: • High Ambient Temperature —Refer to the following table for the high ambient temperature rating of each switch: • Reduced Air Flow —Both side panels must be unobstructed to preven...
4 Cisco 300 Series Managed Switches Rack-Mount Placement S TEP 1 Remove the four screws from each side near the front of the switch. Retain the screws for re-installation. (Do not remove the four screws from each side near the back of the switch.) S TEP 2 Place one of the supplied spacers on the sid...
