Cisco ME 3600X - Manual
Cisco ME 3600X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – About this Guide; Box Contents
- Page 3 – Initial Setup
- Page 4 – Completing the Initial Configuration
- Page 6 – Managing the Switch through the CLI; Other Management Options; Installing the Switch; Equipment That You Supply
- Page 7 – Safety Warnings
- Page 8 – Attaching the Brackets
- Page 9 – Rack-Mount the Switch
- Page 10 – Connecting to the Switch Ports; Install the XFP Modules and Connect to the Ports
- Page 11 – Verify Port Connectivity; Troubleshooting; Initial Configuration Setup
- Page 12 – Resetting the Switch to the Default Settings; Accessing Help Online; Obtaining Documentation and Submitting a Service Request; For More Information
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco ME 3600X-24CX Switch Getting Started
Guide
•
•
•
•
Managing the Switch through the CLI, page 6
•
•
Connecting to the Switch Ports, page 10
•
•
Obtaining Documentation and Submitting a Service Request, page 12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Cisco ME 3600X-24CX Switch Getting Started Guide OL-27508-01 About this Guide About this Guide This guide provides instructions on how to install and configure your Cisco Metro Ethernet (ME) 3800X and ME 3600X switch. Also covered are switch management options, basic rack-mounting procedures, port...
3 Cisco ME 3600X-24CX Switch Getting Started Guide OL-27508-01 Initial Setup Initial Setup You need this equipment: • PC • Straight-through or crossover Category 5 Ethernet cable Step 1 Obtain this information from your network administrator before you start the setup program: • Switch IP address • ...
4 Cisco ME 3600X-24CX Switch Getting Started Guide OL-27508-01 Initial Setup Completing the Initial Configuration Follow these steps to complete the setup program and to create the initial switch configuration. Step 6 Approximately 30 seconds after the switch powers on, it begins the power-on self-t...
