Cisco 8500 - Manual

1-7 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts EM Objects and Interfaces The physical objects and interfaces in the preceding table are organized as follows: • The chassis contains the modules, including supporting modules (e.g., processors, SFCs, power supplies, and fan trays); • The...

1-9 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts EM Objects and Interfaces • Up to 2 route processor modules, where 1 processor is the primary and 1 is redundant • Up to 3 switch processor modules (Switch Fabric Cards), where 2 processors are primary and 1 is redundant • Up to 2 AC or D...

1-11 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts EM Objects and Interfaces Physical Interfaces and Logical Interface Technologies Physical interfaces and logical interface technologies are modeled as objects below a parent module. As mentioned before, the type of module characterizes t...

1-12 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts EM Objects and Interfaces Table 1-6 Physical Interfaces, Related Technologies and Windows Although not technology–specific, physical or logical, generic support is available through Configuration, Status, and Performance windows for each...

1-13 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Views Views Views are accessible by clicking the Viewer icon on the Cisco EMF launchpad. These views appear in the frame at the left of the window when you open the Map Viewer window (see the following figure for an example). Views model...

1-14 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Views Component Managed View The Component Managed view displays all objects within the Cisco EMF system. For example, say you have two types of EM applications installed in Cisco EMF: EM A and EM B. Information for both the EM A and EM ...

1-15 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Views Layer 3 QoS View The Layer 3 QoS view displays only Layer 3 QoS objects within the EM, such as the following: • Access Lists • Committed Access Rate (CAR) objects • Weighted Random Early Detection (WRED) objects You can work within...

1-17 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Object States Object States Object states reflect the life cycle of an object. Whatever stage the object is in at any given time displays in the state type. The state of an object can change frequently, depending upon what actions take p...

1-18 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Object States Decommissioned State The decommissioned state indicates that an object is not managed. When you manually deploy an object, the object is normally put into the decommissioned state. Tip Initially deployed objects are decommi...

1-19 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Object States Lost Comms The lost comms (lost communications) state indicates that the object is not responding to heartbeat polling. The EM can apply this state to a chassis, module, or interface. When an object is in the lost comms sta...

1-20 Cisco Catalyst 8500 Manager User Guide Chapter 1 Concepts Object States the chassis enters the mismatched state. To rectify this problem, you must either delete the predeployed chassis and deploy the correct one, or fix the IP address by re–entering the correct one in the chassis Management Inf...