Cisco 2800 Series - Manual
Cisco 2800 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Verify the PC Setup
- Page 3 – Connect the Cisco 800 Series Router to a PC
- Page 4 – Connect the Cisco 800 Series Router to a Hub
- Page 5 – Connect an ISDN Line; Option A—Connecting Cisco 801 and Cisco 803 Routers
- Page 6 – Option B—Connecting Cisco 802 and Cisco 804 Routers
- Page 7 – Connect the Power and Turn On the Router
- Page 8 – Verifying the LEDs; LEDs To Check
- Page 9 – About the Product CD; System Requirements
- Page 10 – Using the CD Interface; Changing the Display Properties of Documents; Printing Documents; Click the Printer icon on the Acrobat toolbar.; Select your default printer and click OK.; Ordering Printed Copies of Documents
Corporate Headquarters:
Copyright © 2001. Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 800 Series Router Cabling and Setup
Quick Start Guide
This document describes the basic process of cabling and configuring the Internet access device, the
Cisco 800 series router. For advanced cabling information, refer to the Cisco 800 Series Router Hardware
Installation Guide. For advanced configuration information, refer to the Cisco 800 Series Router Software
Configuration Guide. These documents are available on the Cisco Documentation CD-ROM and on the
World Wide Web.
You can access the most current Cisco documentation on the World Wide Web at the following sites:
•
http://www.cisco.com
•
http://www-china.cisco.com
•
http://www-europe.cisco.com
Parts List
The shipment of your Cisco 800 series router includes the following items:
•
One Cisco 800 series router
•
One yellow Ethernet cable
•
One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)
•
One red ISDN U cable (Cisco 802 and Cisco 804 only)
•
One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)
•
One blue console cable
•
One DB-9-to-RJ-45 adapter (for use with the blue console cable)
•
One DB-25-to-RJ-45 adapter (for use with the blue console cable)
•
One black power supply
•
One black power supply cord
•
800 and SOHO Series Product Documentation CD
•
Cisco 800 Fast Step CD-ROM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Verify the PC Setup 78-5374-03 Verify the PC Setup Figure 1 shows the items included with the router. If any of the items is missing or damaged, contact your customer service representative. Figure 1 Items Included with the Router Verify the PC Setup Before you begin, verify that each computer tha...
3 Connect the Cisco 800 Series Router to a PC 78-5374-03 Connect the Cisco 800 Series Router to a PC Connect the Cisco 800 Series Router to a PC Follow these steps to connect the Cisco 800 series router to a PC: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 and 80...
4 Connect the Cisco 800 Series Router to a Hub 78-5374-03 Connect the Cisco 800 Series Router to a Hub Connect the Cisco 800 Series Router to a Hub Follow these steps to connect the Cisco 800 series router to a hub: Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port (Cisco 801 an...
