Page 3 - Contents
Contents Warning...........................….....................………………………........................1 Safety instructions…………………………………….....…………....................5 Main Unit Control............................................................................................ 6 Connection and setup.......
Page 4 - Warning; then retain this manual for future reference.; changed without notice.; CAUTION
Warning DEAR CUSTOMER: Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. REGULATORY INFORMATION...
Page 5 - IMPORTANT WARNINGS AND CAUTIONS!; Fire or explosion; ---Do not use or store flammable or combustible materials near the; or double insulated electrical appliance. It has been
Warning IMPORTANT WARNINGS AND CAUTIONS! Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTEN...
Page 6 - Entering of objects and liquids; excessive heat such as sunshine, fire or the like.; Panel protection; The panel used in this product is made of glass. Therefore, it can; Operating Temperature:
Warning 10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect device shall remain readily operable. 11. Wall mounting ---When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety featur...
Page 7 - IMPORTANT INFORMATION
Warning a.b.c.d. e. f. g. IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided bytaking simple precautions such as: Using cabinets or stands recommended by th...
Page 8 - Safety Instructions; IMPORTANT SAFETY INSTRUCTIONS
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 7. Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, ...
Page 10 - Main Unit Control; Front Panel; Remote sensor
Main Unit Control Front Panel Remote sensor Power Indicator 7
Page 11 - Antenna input; 通孔; CH
Main Unit Control HDMI1supports ARC function). Antenna input 5. USB port 1. HDMI1/2 port ( 2. NOTE: Input / Output connectivity options may change from model to model. Rear & Sides Panel Digital audio out 通孔 通孔 通孔 通孔 CH ＋ CH － VOL ＋ VOL － MENU TV/AV 8 3. 4. AV input 1 2 3 4 5
Page 12 - Connection and setup; Long press to turn off the TV.
Before the installation and use, please read carefully the relevant content in “Warning and Safety instructions”. HDMI: Support AV devices with an HDMI connector (such as set top box, DVD player, digital TV set, etc.).HDMI is also called as high definition multimedia interface, and it can transmit d...
Page 13 - Getting Started; Notes on Using Batteries; Installing Batteries in the Remote Control
Getting Started When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may not operate. Point the remote control at the REMOTE SENSOR located on the television. When using this televis...
Page 14 - Remote Control; Press to enter the Recorded list. (In DTV
Remote Control The buttons of the original remote control are as following: Definition of the buttons on remote control:1. : Power, Press to enter or exit the standby mode. . : Mute or restore sound. . NUMBER BUTTONS: Choose channels or password importation. . SOURCE: Press to select signal source ....
Page 15 - The buttons not mentioned here are not used.; Press to select the NICAM
Remote Control NOTE: ※ The buttons not mentioned here are not used. ※ All pictures in this manual are examples, only for reference, actual product maydiffer from the pictures. COLOR BUTTONS: Red/green/yellow/ blue key navigation link. : Fast reverse (in Media mode)Fast forward (in Media mode) : Next...
Page 16 - Basic Operation; ▲/▼ buttons to select the country you are living in, and then press the
Basic Operation • Turn on the TV Connect the TV to your mains socket. If TV has a power switch, turn it on firstly. In standby mode, press Power button on the remote to turn on the TV. • Turn off the TV Press the button on the remote control to enter standby mode. Do not leave your TV in standby mod...
Page 17 - Changing the Input Source; Input Source
Basic Operation on the remote control. Press CH to increase channel number. Press CH to decrease channel number. / • Using 0-9 digital buttons. You can select the channel number by pressing 0 to 9. Additionally, when TV is in some mode, the TV will work in TV mode and play the corresponding channel ...
Page 18 - Menu Operation; ▲/▼ buttons to select the preferred option.; MENU; How to Navigate Menus
Menu Operation Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU button to display the main menu. 2. Press the ◄/► buttons to cycle through the m...
Page 19 - Channel Menu
Menu Operation . ■ Auto tuning: Select the ENTER button to start Auto Tuning. 1. Select the country and tune type for channels. 2. The TV will begin memorizing all of the available channels. Once the progress bar is full, the found channels will be stored and the unit will proceed to the search for ...
Page 20 - RED; moving state, and then; BLUE; (Your TV set will skip the channel; Signal Information(Only available when there is signal under DTV); s to select the Signal Information, then press the; ENTER; button to see the detail information.
Menu Operation Delete: Press the RED button to delete the channel. Move: Press the YELLOW button to set the channel to moving state, and then press the ▲/▼ buttons to move it to the position you want to put. Skip: Press the BLUE button to skip the channel. (Your TV set will skip the channel automati...
Page 21 - * this is only available in some countries, mainly in; Sound Menu; OverScan; The picture reproduction rate is adjusted.
Menu Operation ■ Balance: Adjust the level of sound coming from the left and right speakers. ■ AVL(Auto Volume Level): Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be nee...
Page 22 - No Signal Power Off:; Lock Menu
Menu Operation ■ Auto Sync: If set it to ON, the TV will sync the local clock according to the DTV broadcasting time automatically. ■ Clock: Display either the DTV signal stream time or set the time manually. ■ Sleep Timer: Sleep Timer switches the TV to standby after a defined period of time. To ca...
Page 23 - Home
Menu Operation ■ Block Program (In ATV/DTV mode): Press the YELLOW button to lock the available channel you want. Press the YELLOW button again to unlock it. To watch a locked channel, enter your 4 digit password number when input screen displays. ■ Parent Lock (In DTV mode): This feature can preven...
Page 24 - Display current software version information.
Menu Operation connected to, will become the active input device for the TV. – Device List: Display devices that are connected to TV. ■ Power On Logo: Switch the Power On Logo function On or Off. ■ Default: Restore the system settings to the factory default. When the restore is complete, the TV will...
Page 27 - Hotel Mode; SOURCE; USB Operation
Menu Operation enter into the Hotel Mode to adjust the relative settings. Press the buttons to select Hotel Mode, and then press button to set On or Off. NOTE: The following settings work only when Hotel Mode is set to be On. - On Source Set the default signal source by pressing the ◄ / ► buttons....
Page 28 - • The formats supported; Media; Movie
Menu Operation • The formats supported Media File Ext. Codec Remark Video Audio Movie .mpeg, .mpg MPEG1/2,MPEG4,VC1 MPEG1/2 Layer1,MPEG1/2 Layer2,MPEG1/2 Layer3,AAC,AC3, EAC3,HEAAC 1.Max resolution 1080P 30fps 2.MPEG-4 V2 not support .vob, .dat MPEG1/2 .ts, .tp, .trp MPEG1/2,H.264,MVC, VC1,HEVC .avi...
Page 29 - File Size; When playing Photo files:
Menu Operation Photo .jpg, .jpeg Progressive JPEG Max Resolution: 1024×768 Baseline JPEG Max Resolution: 15360×8640 (1920x8 x 1080x8) .bmp -- Max Resolution: 9600×6400 .png Non-Interlaced Max Resolution: 9600×6400 Interlaced Max Resolution: 1200×800 Text .txt TM Player File Size ： Max 1MB NOTE: Sp...
Page 30 - When playing Music files:
Menu Operation When playing Music files: ＊ Use the ◄/► buttons, then press ENTER to select a function such as Previous, Next, play, pause the on-screen toolbar. ＊ Press or EXIT buttons to exit playback & go back to file list page. When playing Movie files: Press the INFO/ENTER button on the remo...
Page 31 - Important Unique Buttons; Index
Important Unique Buttons Channel List PROGRAMME GUIDE (In DTV mode) Press EPG button to display the Programme Guide menu. This function let you know the detailed information of the channel, indicating the time of the program playing. From the Programme Guide it is possible to check the program infor...
Page 33 - Teletext; Using the teletext feature
Teletext • Display teletext 1. Select a TV station with a teletext signal. 2. Press the button to enter teletext mode. 3. Press the button 2nd to enter Mix mode, this function enables you to superimpose the teletext page over the TV program. 4. Press the button 3rd return or exit to the normal TV/DT...
Page 34 - Troubleshooting Guide; solutions without contacting with the technicians.; Symptoms; Troubleshooting
Troubleshooting Guide When you meet the following common problems, you might diagnose and get the solutions without contacting with the technicians. Symptoms Possible Reason Solutions No picture, no sound, and no indicator light on 1.The power cord is not plugged in 2.The power is off 1.Plug the pow...
Page 35 - the cloth until it’s almost dry, and then used it to wipe the screen.
Troubleshooting Guide Early malfunctions can be prevented. Careful and regular cleaning can extend the life of your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the screen 1. Here’s a great way to keep the dust off your screen for a while. W...
