CHiQ CCD596NS - User Manual

Page 2 - PART NAMES AND LOCATIONS; Description

PART NAMES AND LOCATIONS IN ACCESSORY BAG: USER MANUAL, WARRANTY As the manufacturer holds the authority to redesign or modify its products without notice : Any modifications or upgrades of our products will result in this refrigerator varying slightly from this manual but the functionality will rem...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Follow these basic precautions to reduce the risk of fire,

1 IMPORTANT SAFETY INSTRUCTIONS  WARNING  Follow these basic precautions to reduce the risk of fire, electrical shock hazards or injury when operating the refrigerator: • This product has been designed for using in a normal domestic environment. It is not intended for commercial use which will avo...

Page 6 - INSTALLATION INSTRUCTIONS; Before Using the Refrigerator

4 INSTALLATION INSTRUCTIONS Before Using the Refrigerator • Remove the exterior and interior packing. • Before connecting the refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling...

Page 7 - Product Features; Electronic control; ENERGY SAVING TIPS

5 Product Features • Electronic control Adopting the electronic temperature control, the fridge-freezer is designed with a LEDdisplay screen, by which the temperature of each compartment and the workingparameters can be managed and set. • Inverter technology Integrated with precise frequency convers...

Page 8 - OPERATING INSTRUCTIONS; Lock function

6 OPERATING INSTRUCTIONS The unit has triple cooling system as right picture. The top compartment has pure fridge function. The bottom left compartment has pure freezer function. Bottom right compartment is variable temp zone, it can be adjusted from 5 ℃ to -24 ℃ to meet different storage requiremen...

Page 9 - Temperature setting

7  Temperature setting Before changing the temperature setting, please make sure the control panel isn’t locked and ECO mode, fast freezing & fast cooling aren’t active . Temp can’t be changed if any of the mode is active. 1 ） Fridge temperature setting Press the “Fridge” key to adjust the frid...

Page 10 - crisper; Function setting mode; To active “ECO”

8 4) Care+ setting Press the ‘Care+’ key (for less than 3s) to set vary function mode for crisper area in fridge compartment. Press the Care+ key to adjust function in cycle as following: Vegetables → Fruits → Chill → Vegetables. Vegetables setting will be suitable for green leaf and similar product...

Page 11 - To exit “ECO”; Fast cooling; To enter “Fast Cooling”.; To exit “Fast Cooling”.; Fast Freezing

9 then press the “OK” key or wait for 5 seconds to validate the setting, with the icon of “ECO” stays On. 3 ） To exit “ECO” When the ECO function is active, press and hold Care+ key for 3 seconds until theicon of ECO starts flickering, and then press the “OK” key or wait for 5 seconds tovalidate the...

Page 12 - Door open alarm

10 function gets exited. Cooling down the freezer temperature in a rapid manner is good for the prevention against food nutrition loss and the preservation of freshness. When the fast-freezing function is active, the Freezer temperature is subject to no change. 2) To enter “Fast Freezing”. Press and...

Page 13 - GENERAL CARE AND MAINTENANCE; Cleaning the Refrigerator; Vacation Time

11 GENERAL CARE AND MAINTENANCE Cleaning the Refrigerator • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly and properly maintained thereafter. • Turn off the refrigerator and then unplug the unit from the wall outlet. • Remove all food content before washing...

Page 14 - TROUBLESHOOTING GUIDE; Problem

12 TROUBLESHOOTING GUIDE Problem Solution The fridge has no power  Power cord isn’t plugged in properly.  The circuit breaker tripped or a blown fuse.  Try a different power point. The light is not working.  There is no light in freezer compartment, only fridge compartment has light.  Make sure...

Page 16 - Customer Service