Page 2 - Have questions or need assistance?; Call our Customer Care Team Toll-Free at:; AN IMPORTANT MESSAGE ABOUT TEMPERATURE:
Have questions or need assistance? Do not return this product to the store ! WE ARE HERE TO HELP! Visit our website: www.championpowerequipment.com for more info: • Product Info & Updates• Frequently Asked Questions • Tech Bulletins• Product Registration – or – Call our Customer Care Team Toll-F...
Page 3 - TABLE OF CONTENTS
91050 TABLE OF CONTENTS 3 in. (7.6 cm) Chipper-Shredder Introduction 1 Introduction 1 Chipper-shredder 1 Website 1 This Booklet 1 Manual Conventions 2 Safety Rules 3 Training 5 Preparation 5 Operation 6 Maintenance and Storage 6 Controls and Features 7 Chipper-shredder 7 Parts Included 8 Assembly 9 ...
Page 4 - ENGLISH; INTRODUCTION; Introduction; Model Number
1 REV 91050-20140620 ENGLISH 91050 INTRODUCTION Introduction Congratulations on your purchase of a Champion Power Equipment chipper-shredder. CPE designs and builds chipper-shredders to strict specifications. With proper use and maintenance, this chipper-shredder will bring years of satisfying servi...
Page 5 - MANUAL CONVENTIONS; CAUTION; DANGER; WARNING
REV 91050-20140620 2 91050 ENGLISH MANUAL CONVENTIONS CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result ...
Page 6 - SAFETy RULES; When servicing the engine :
3 REV 91050-20140620 ENGLISH 91050 SAFETy RULES Engine exhaust contains carbon monoxide, a colourless. odourless, poison gas. Breathing carbon monoxide will cause nausea, dizziness, fainting or death. If you start to feel dizzy or weak, get to fresh air immediately. DANGER Run the motor outdoors onl...
Page 7 - When adding or removing fuel :
REV 91050-20140620 4 91050 ENGLISH SAFETy RULES Projectile Hazard Pieces of debris may be ejected from the chipper-shredder while operating. Be alert. WARNING Always wear proper clothing and safety gear. DANGER Close fitting clothing and safety approved eye protection must be wore at all times aroun...
Page 8 - Training
5 REV 91050-20140620 ENGLISH 91050 SAFETy RULES Training 1. Read the Operator’s Manual completely before attempting to use this chipper-shredder. 2. Do not allow anyone to operate your chipper- shredder who has not read the Operator’s Manual or has not been instructed on the safe use of the chipper-...
Page 9 - Maintenance and Storage
REV 91050-20140620 6 91050 ENGLISH SAFETy RULES Maintenance and Storage 1. Always shut off the power source and disconnect the spark plug wire and ground the engine, while repairing or adjusting the unit. 2. Clean debris, shrubbery and chaff from the engine cylinder, cylinder head fins, blower house...
Page 10 - CONTROLS AND FEATURES
7 REV 91050-20140620 ENGLISH 91050 (1) Throttle (2) Choke (3) Engine – 338cc, OHV, 4-stroke, air cooled. (4) Shredder Chute – place shreddable material in this chute. (5) Handle (6) Chipper Chute – place chippable material in this chute. (7) Wheels – 12 in. (30.5 cm) never flat. (8) Collection Bag –...
Page 11 - Parts Included
REV 91050-20140620 8 91050 ENGLISH CONTROLS AND FEATURES Parts Included Your 91050 gasoline powered chipper-shredder ships with the following parts: – Collection Bag - 2 Bushel (70 L) Capacity 1 – Oil Funnel 1 – Spark Plug Socket 1
Page 12 - ASSEMBLy; Unpacking; ) Install the Shredder Chute; NOTE
9 REV 91050-20140620 ENGLISH 91050 ASSEMBLy Your chipper-shredder requires some assembly. This unit ships from our factory without oil. It must be properly serviced with fuel and oil before operation.If you have any questions regarding the assembly of your chipper-shredder, call our help line at 1-8...
Page 13 - Collection Bag Cont’d.; ) Install the Chute Deflector
REV 91050-20140620 10 91050 ENGLISH ASSEMBLy Collection Bag Cont’d. 4) Install the Chute Deflector 1. Align the chute deflector (#57) and the hinge spacers (#58) up with the hinge mounting holes on the flailing housing. (A) 2. Slide bolt M6x100 (#45) through the hinge mounting holes, hinge spacers, ...
Page 14 - Add Engine Oil; Add Engine Oil Cont’d.
11 REV 91050-20140620 ENGLISH 91050 ASSEMBLy Add Engine Oil Add Engine Oil Cont’d. 1. Place the generator on a fl at, level surface.2. Remove oil fi ll cap /dipstick to add oil.3. Add up to 1.16 qt. (1.1 L) of oil and replace oil fi ll cap/dipstick. DO NOT OVERFILL. 4. Check engine oil level daily a...
Page 15 - Add Engine Fuel Cont’d.; Add Engine Fuel
REV 91050-20140620 12 91050 ENGLISH ASSEMBLy Add Engine Fuel Cont’d. Add Engine Fuel 1. Use clean, fresh, regular unleaded fuel with a minimum octane rating of 85 and an ethanol content of less than 10% by volume. 2. DO NOT mix oil with fuel.3. Clean the area around the fuel cap.4. Remove the fuel c...
Page 16 - OPERATION; Chipper-Shredder Location
13 REV 91050-20140620 ENGLISH 91050 OPERATION Chipper-Shredder Location Never operate the chipper-shredder indoors or inside any confined spaces, enclosures or buildings; including garages, basements, and sheds. The chipper-shredder must have at least 5 ft. (1.5 m) of clearance on all sides from com...
Page 17 - Before Each Use Inspect the Chipper-Shredder; Starting the Engine
REV 91050-20140620 14 91050 ENGLISH OPERATION Before Each Use Inspect the Chipper-Shredder 1. Make sure the spark plug wire has been disconnected and engine has been grounded. 2. Visually inspect all attachments and chutes for loose fittings, cracks, fraying or other damage. 3. DO NOT operate the ch...
Page 18 - Chipper-Shredder Operation
15 REV 91050-20140620 ENGLISH 91050 If the impeller or blades strike a foreign object, stop engine immediately. Do not continue use until chutes and unit have been thoroughly inspected. Do not attempt to unclog any jam or chute while engine is on or spark plug wire is connected. DANGER This machine ...
Page 19 - Clearing the Shredding Chute; Chipping and Shredding Tips; Chipping; Chipping and Shredding Tips Cont’d.
REV 91050-20140620 16 91050 ENGLISH Clearing the Shredding Chute If the shredding chute gets slightly clogged, then firmly grasp the handle and gently rock the unit back and forth to try and dislodge or shift the material that may be causing the clog. This may help to loosen and draw the material be...
Page 20 - Stopping the Engine; Emptying the Collection Bag
17 REV 91050-20140620 ENGLISH 91050 OPERATION Stopping the Engine 1. Turn the throttle down to the “SLOW” position.2. Turn the fuel knob to the “OFF” position.3. Let the engine run until fuel starvation has stopped the engine. This usually takes a few minutes. 4. Turn the engine switch to the “OFF” ...
Page 21 - MAINTENANCE AND STORAGE; Engine Maintenance; Oil; Spark Plugs
REV 91050-20140620 18 91050 ENGLISH MAINTENANCE AND STORAGE The owner/operator is responsible for all periodic maintenance. Complete all scheduled maintenance in a timely manner. Correct any issue before operating the log splitter. For service or parts assistance, contact our help line at 1-877-338-...
Page 22 - Chipper-Shredder Maintenance; Air Filter; Cleaning; Flail Housing and Impeller Cleaning
19 REV 91050-20140620 ENGLISH 91050 MAINTENANCE AND STORAGE Do not use the chipper-shredder if any part is lost or damaged while cleaning. Get lost or damaged parts replaced before use. Do not use the chipper-shredder if any part is loose, not fitting correctly or not fully re-assembled. WARNING Chi...
Page 23 - Blade Sharpening Cont’d.
REV 91050-20140620 20 91050 ENGLISH 6. Once the 7/16 screw, lock washer, and washer are removed, the impeller (#29) can be removed from the cam shaft of the engine. 7. Removing the impeller will make it easier to remove and sharpen the shredder blade, flail blades, and chipper blades. 8. To remove t...
Page 24 - Maintenance Schedule; Storage; Chipper-shredder Storage
21 REV 91050-20140620 ENGLISH 91050 MAINTENANCE AND STORAGE Maintenance Schedule Follow the service intervals indicated in the schedule below. Service your chipper-shredder more frequently when operating in adverse conditions. Contact our help line at 1-877-338-0999 to locate the nearest Champion Po...
Page 25 - SPECIFICATIONS
REV 91050-20140620 22 91050 ENGLISH Chipper-Shredder Specifications – Max Diameter Chipper Material 3 in. (7.6 cm) – Max Diameter Shredder Material 0.5 in. (1.3 cm) – Overall Dimensions – Gross Weight 224.9 lb. (102 kg) – Net Weight 189.6 lb. (86 kg) – Height 49.4 in. (125.5 cm) – Width 35 in. (89 c...
Page 26 - Parts Diagram
23 REV 91050-20140620 ENGLISH 91050 Parts Diagram SPECIFICATIONS 1 3 4 7 6 5 16 15 10 14 10 14 13 11 12 10 18 19 20 23 21 22 17 10 3 2 22 25 24 10 32 31 30 26 27 28 29 36 14 34 30 35 35 30 14 37 38 39 33 32 40 41 42 10 43 45 25 44 22 46 21 22 57 58 59 30 14 60 56 11 30 14 53 21 22 43 33 43 9 8 61 52...
Page 27 - Parts List
REV 91050-20140620 24 91050 ENGLISH Parts List # Part number Description Qty 1 SMJ-25 Wheel Cap 1 2 GB/ T 91-2000 (Ø3.2×20) Cotter Pin Ø3.2×20 3 3 GB/ T 95-2000 (Ø12) Washer Ø12 3 4 SMJ-10 12 in. Wheel 2 5 GB/ T 95-2000 (Ø10) Washer Ø10 4 6 GB/ T 93-1987 (Ø10) Lock Washer Ø10 4 7 GB/ T 41-2000 (M10)...
Page 28 - Engine Parts Diagram
25 REV 91050-20140620 ENGLISH 91050 Engine Parts Diagram SPECIFICATIONS 47 64 13 127 128 42 118 119 120 121 92 122 123 105 106 107 124 108 125 126 109 110 91 111 112 113 85 13 23 24 25 26 27 28 29 30 92 143 33 34 35 142 37 38 39 40 22 41 43 44 45 46 48 49 50 51 52 53 54 55 13 56 57 58 59 60 61 62 63...
Page 29 - Engine Parts List
REV 91050-20140620 26 91050 ENGLISH Engine Parts List # Part Number Description Qty 1 23.061006.01 Recoil Handle (Big) 1 2 1.5789.0608 Flange Bolt M6× 8 3 3 46.061100.00.2 Recoil Starter Cover, Black 1 4 45.060005.00 Recoil Starter Spring 1 5 45.061102.00 Recoil Starter Reel 1 6 2.10.003 Rope (Ø5×15...
Page 30 - TROUBLESHOOTING; For further technical support :
27 REV 91050-20140620 ENGLISH 91050 TROUBLESHOOTING For further technical support : Technical ServiceMon – Fri 8:30 AM – 5:00 PM (PST/PDT)Toll Free: 1-877-338-0999tech@ championpowerequipment.com Problem Cause Solution Engine will not start No fuel Add fuel Faulty spark plug Replace spark plug Unit ...
Page 31 - WARRANTy
REV 91050-20140620 28 91050 ENGLISH WARRANTy WARRANT y CHAMPION POWER EQUIPMENT 1-YEAR LIMITED WARRANTY Warranty Qualifications Champion Power Equipment (CPE) will register this warranty upon receipt of your Warranty Registration Card and a copy of your sales receipt from one of CPE’s retail locatio...
