Century WDV10 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; When using an electrical appliance, basic precaution must; READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.; This machine is for commercial use.; WARNING; pick up flammable fluids, dust or vapors.; Do not; This machine; is not; suitable for picking up health endangering dust.

IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. This machine is for commercial use. WARNING DANGER: Failure to read and observe all DANGER statements could result in ...

Page 3 - If the machine is; not working properly; dropped into water, return it to an Authorized service center.; SAVE THESE INSTRUCTIONS

DANGER: Electrocution could occur if maintenance and repairs are performed on a unit that is notproperly disconnected from the power source. Disconnect the power supply beforeattempting any maintenance or service. WARNING: Operating a machine without observing all labels, decals, etc., could result ...

Page 5 - VACUUM AND ACCESSORIES; IMPORTANT INSTRUCTIONS; S7TOOLKIT; Complete Standard Tool Kit

VACUUM AND ACCESSORIES A Motor Block B On/Off Switch C Float: Keeps liquid out of Motor Block D Polyester Filter: Remove for use with liquids E Hooks: Secure Motor Block to Tank F Suction Inlet G Tank H 2-pc. Chrome Wand I 10-ft. x 1-1/2" Flexible Hose J 2-pc PVC Wand K Universal Adapter M 3"...

Page 6 - At the end of each working day:; LN

5 This machine is a commercial vacuum designed for wet anddry pick-up. Dry soil can be vacuumed directly into the tank. To empty thetank of dry soil, remove the top and dump into trashreceptacle. For wet pick-up, remove polyester filter. The machine isequipped with a float shut-off. As the tank is f...

Page 7 - MOTOR REPLACEMENT; SERVICING THE VAC MOTOR

6 (Every six to twelve months): 1. Check filter for wear, replace dirt saturated filters thatdo not respond to normal cleaning. 2. Inspect gasket seals and replace those which havebegun to leak. 3. Examine carbon motor brushes and commutator. PERIODIC MAINTENANCE The filter is accessed by lifting th...

Page 8 - CARBON BRUSH REPLACEMENT; Disconnect power cord from power source.; See Figure 1; Test for proper operation

7 CARBON BRUSH REPLACEMENT 1. Disconnect power cord from power source. 2. To access the vac motor, remove thescrews that attach the main cover to thehead assembly and set the cover to oneside. 3. Remove the motor cover by removing twoscrews. See Figure 1 4. Remove the wire terminal from carbonbrush ...

Page 9 - VACUUM MOTOR ASSEMBLY; FILTER GROUP; TANK ASSEMBLY

WDV10 VACUUM MOTOR ASSEMBLY No. Part Num. Description Qty. 1. S80466 Cord 1 2. S80138 Strain Relief 1 3. S80139 Terminal Clip 1 4. S81006 Screw, 5 x 20 2 5. S80450 Terminal Block 1 6. S83733AUG6 Handle, Gray 1 7. S82627 Screw, 5 x 40 4 8. S81006 Screw, 5 x 20 2 9. S81054 Screw, 5 x 30 2 10. S81054 S...

Page 12 - RECOMMENDED; SPARE PARTS; TSQ16 FRONT-MOUNTED SQUEEGEE

11 ACCESSORIES TSQ16 Front Mounted Squeegee S72741 Paper Bag S82845 Filter Bag, Standard S82852* Filter Cartridge, Paper, Optional S76061* Filter Cartridge, Washable Paper S82995* Filter Cartridge, HEPA Equivalent S82855 Cartridge Filter Retainer *also order S82855 Retainer with Filter RECOMMENDED S...

Century WDV10 - Manual

Table of Contents:

Summary

Other Century Models