Celestron Feathertouch SCT Microfocuser - Manual
Celestron Feathertouch SCT Microfocuser – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Instructions – Celestron 11” Telescopes
Important:
The telescope optical tube must be positioned horizontally before
removing the original focus assembly. If the telescope is not horizontal the primary
mirror could move during the installation.
Required Tools:
Phillips Screwdriver
1/16” Hex-Head Wrench (Not required for NexStar 11 GPS)
Step 1
Remove Focus Knob
NexStar 11 GPS telescopes have a rubber knob which can be pulled off. Older 11"
telescopes will have a metal focus knob which must be removed using a 1/16” hex-head
wrench to loosen a small set screw. Once the knob is removed you will see the brass
focus shaft as shown below.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
