Celestron 52291 - Manual
Celestron 52291 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Assembly
- Page 5 – Finderscope; Rear Cell
- Page 7 – eliminate any possible parallax effect.
- Page 11 – eo
- Page 14 – OMNI Plöss; Plössl eyepieces have a 4-element lens designed for low-to-high
C5 Spotting Scope - #52291
Instruction Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Assembly This section covers the correct set up and operating procedures for your Celestron C5 spotting scope and includes information on visual and photographic observations. The C5 spotting scope uses a combination of mirrors and lenses to produce an image. Such an optical system is known as a com...
2. Slide the rubber O-ring onto the back (eyepiece end) of the finder. 3. Position the O-ring on the main body of the finder so that it is toward the front (i.e., objective) end of the finder. 4. Slide the finder, eyepiece end first, into the front ring of the bracket. Push it back until the O-ring ...
power and has a 30mm objective lens. Incidentally, power is always compared to the unaided human eye. So an 8 power finder magnifies images eight times more than the human eye. To make the alignment process a little easier, you should perform this task in the daytime when it is easier to locate obje...
