Page 3 - Contents; Preface
Avaya P460 Installation and Maintenance Guide i Contents List of Tables ....................................................................................................... v List of Figures .................................................................................................. vii Pre...
Page 4 - Chapter 5
Table of Contents ii Avaya P460 Installation and Maintenance Guide Introduction ...................................................................................................... 19Installing a PSU ................................................................................................ 1...
Page 5 - Chapter 8
Table of Contents Avaya P460 Installation and Maintenance Guide iii Outband Interface Connection CLI Commands .............................. 44Redundant Outband Connections ..................................................... 45 Establishing a PPP via Modem Connection with the P460 (Sideband) ... 4...
Page 7 - List of Tables
Avaya P460 Installation and Maintenance Guide v List of Tables Table 3.1 Environmental Requirements..................................................... 4 Table 3.2 AC Power Requirements............................................................. 5 Table 3.3 Dimensions.................................
Page 9 - List of Figures
Avaya P460 Installation and Maintenance Guide vii List of Figures Figure 3.1 The Avaya P460 Switch – Component Location ..................... 6 Figure 3.2 Table-Top Installation.................................................................. 7 Figure 3.3 P460 Front-Mount and Mid-Mount Positions (s...
Page 11 - Before you Install the Avaya TM P460; Safety Information; designed Avaya products.; Power Supplies
Avaya P460 Installation and Maintenance Guide I Before you Install the Avaya ™ P460 Safety Information Caution: The Avaya P460 switch and modules contain components sensitive to electrostatic discharge. Do not touch the circuit boards unless instructed to do so. Caution: Do not leave any slots open....
Page 12 - FCC Notice; Notes, Cautions and Warnings; Text with the
Preface II Avaya P460 Installation and Maintenance Guide Caution: Gafahr des elektrischen Schocks. Entfernen des Netzsteckers eines Netzteils legt nur dieses Netzteil spannungsfrei. Um alle Einheiten spannungsfrei zu machen. Sind die Netzstecker aller Netxteile zu entfernen Caution: Risque d'électro...
Page 13 - all; CLI Conventions; Mandatory keywords are in the; computer bold; Information displayed on screen is displayed in; Warranty; Select; Support; . This Web site includes telephone; Global Escalation List
Preface Avaya P460 Installation and Maintenance Guide III Warning: This means danger. Failure to follow the instructions or warnings might result in bodily injury. Ensure that you are qualified for this task and have read and understood all the instructions CLI Conventions • Mandatory keywords are i...
Page 15 - Chapter 2
Avaya P460 Installation and Maintenance Guide 1 Chapter 2 Avaya P460 Overview Introduction The Avaya™ P460 is a flexible six-slot modular chassis, with two slots reserved for supervisor modules and the four remaining slots for switched I/O modules. It is ideal as a LAN edge and wiring closet switch ...
Page 16 - Avaya P460 Key Features:; High Availability
Chapter 2 Avaya P460 Overview 2 Avaya P460 Installation and Maintenance Guide Avaya P460 Key Features: High Availability • Redundant Supervisor modules • Redundant switching fabric • Three power supply bays that support redundant (optional), load-sharing and fault-tolerant AC power supplies. • Hot-s...
Page 17 - Chapter 3; Avaya P460 Chassis and Module Installation; Introduction
Avaya P460 Installation and Maintenance Guide 3 Chapter 3 Avaya P460 Chassis and Module Installation Introduction This chapter guides you through the basic hardware Installation process. L If you purchased an Avaya P460ML-CFG (Material code 700255003, PEC Code 4548-009), then one Supervisor Module, ...
Page 18 - Required Tools; Environmental Requirements
Chapter 3 Avaya P460 Chassis and Module Installation 4 Avaya P460 Installation and Maintenance Guide Required Tools You require the following equipment in order to install the P460 chassis:• Phillips (cross-blade) screwdriver Environmental Prerequisites Danger: To avoid injury, Avaya recommends that...
Page 19 - The power source matches the specifications shown in Table 3.2.
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 5 • The power source matches the specifications shown in Table 3.2. Table 3.3 Dimensions Table 3.2 AC Power Requirements Voltage 100 to 240 VAC, 50/60 Hz Current for one Avaya MPS4603-AC 300 W PSU 3.9 ...
Page 20 - Chassis Component Location; The Avaya P460 Switch – Component Location; Key; Supervisor modules
Chapter 3 Avaya P460 Chassis and Module Installation 6 Avaya P460 Installation and Maintenance Guide Chassis Component Location Figure 3.1 shows the positions of the components in the P460 chassis. Figure 3.1 The Avaya P460 Switch – Component Location Key 1 Supervisor modules 2 I/O Modules 3 PSUs 4 ...
Page 21 - Installing the P460 on a Table Top; Table-Top Installation; installed in the chassis.; Do not place other equipment on top of the P460.; Rack Mounting; Rubber feet
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 7 Installing the P460 on a Table Top Place the system on a surface that supports at least 100 lbs (45 kg). 5 Install the supplied rubber feet to the bottom of the switch, placing the feet in the square...
Page 22 - Figure 3.3 shows the two mounting positions:; Rack
Chapter 3 Avaya P460 Chassis and Module Installation 8 Avaya P460 Installation and Maintenance Guide Figure 3.3 shows the two mounting positions: Figure 3.3 P460 Front-Mount and Mid-Mount Positions (side view) Key a Rack b P460 switch L The chassis height is 10U. 5.5” (140 mm) a b a b Front Front Fr...
Page 23 - P460 Rack mounting procedure:; Position the brackets as shown in Figure 3.4; Position the switch in the rack.
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 9 P460 Rack mounting procedure: 1 Position the brackets as shown in Figure 3.4 Figure 3.4 Positioning the rack-mounting brackets Key a Front-mount position b Mid-mount position 2 Firmly fix the bracket...
Page 24 - Cable Guide Installation; left side; Left side of chassis
Chapter 3 Avaya P460 Chassis and Module Installation 10 Avaya P460 Installation and Maintenance Guide Cable Guide Installation You can use the cable guide to tidy cables from the Supervisor and I/O modules. The cable guide is symmetric: you can install the bracket on either side of the switch. L Ava...
Page 26 - Fan Module Replacement or Installation; The P460 Chassis is shipped with a fan module already installed.
Chapter 3 Avaya P460 Chassis and Module Installation 12 Avaya P460 Installation and Maintenance Guide Fan Module Replacement or Installation L The P460 Chassis is shipped with a fan module already installed. Danger: Ensure that your fingers and other objects are clear of the fans when you insert or ...
Page 27 - Installing the Avaya P460 Fan Module
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 13 Figure 3.7 Installing the Avaya P460 Fan Module Caution: You need to replace the fan module within five minutes. If you do not, the I/O modules are shut down automatically to prevent overheating of ...
Page 28 - Supervisor Module Installation; Location of the Avaya P460 Supervisor Modules
Chapter 3 Avaya P460 Chassis and Module Installation 14 Avaya P460 Installation and Maintenance Guide Supervisor Module Installation L If you purchased an Avaya P460ML-CFG (Material code 700255003, PEC Code 4548-009), then one Supervisor Module, PSU and the Fan Module are already installed. Figure 3...
Page 29 - Installing the P460 Supervisor Module
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 15 Figure 3.9 Installing the P460 Supervisor Module Key a Open locking handle b Closed locking handle To install a Supervisor module:1 Remove the blanking plate or installed module as appropriate. 2 Op...
Page 30 - I/O Module Installation; Lcoation of Avaya P460 I/O Modules
Chapter 3 Avaya P460 Chassis and Module Installation 16 Avaya P460 Installation and Maintenance Guide I/O Module Installation L If you purchased an Avaya P460ML-CFG (Material code 700255003, PEC Code 4548-009), then one Supervisor Module, PSU and the Fan Module are already installed. Figure 3.10 sho...
Page 31 - I/O Module Component Location
Chapter 3 Avaya P460 Chassis and Module Installation Avaya P460 Installation and Maintenance Guide 17 Figure 3.11 I/O Module Component Location Key 1 Module label 2 Securing screws 3 Locking handles I/O Module Installation Procedure To install an I/O module: 1 Remove the blanking plate by unscrewing...
Page 32 - Installing P460 I/O Modules; Open locking handle
Chapter 3 Avaya P460 Chassis and Module Installation 18 Avaya P460 Installation and Maintenance Guide Figure 3.12 Installing P460 I/O Modules Key a Open locking handle b Closed locking handle 3 3 P460 aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaaaaaa aaa...
Page 33 - Chapter 4; Turning on the Avaya P460
Avaya P460 Installation and Maintenance Guide 19 Chapter 4 Turning on the Avaya P460 Introduction Once you have installed the Avaya P460 chassis and modules, you can turn the chassis on. The Avaya P460 chassis can accommodate one, two or three PSUs (Power Supply Units). The available power is divide...
Page 34 - Powering Up; before; Turning on a Chassis with a Supervisor Module Only; The supervisor module is turned on.; Turning on a Chassis with no Modules; Inserting an Additional PSU
Chapter 4 Turning on the Avaya P460 20 Avaya P460 Installation and Maintenance Guide Powering Up In order to turn on the chassis you need to install at least one PSU and at least one Supervisor Module. L The fans are on whenever the power is on in the chassis, whether Supervisor Modules are installe...
Page 35 - Removing or Switching off a PSU; If there is one PSU; The entire chassis turns off; If there are two PSUs; Slots whose power is disabled are skipped.
Chapter 4 Turning on the Avaya P460 Avaya P460 Installation and Maintenance Guide 21 Removing or Switching off a PSU If there is one PSU The entire chassis turns off If there are two PSUs 1 When you remove a PSU from the chassis, the Supervisor Module recalculates the power budget. If the power requ...
Page 36 - If there are three PSUs
Chapter 4 Turning on the Avaya P460 22 Avaya P460 Installation and Maintenance Guide If there are three PSUs The chassis continues to run: two PSUs are sufficient to supply power to a fully populated chassis.
Page 37 - Power Management; Power Management Priority; The Power Management Process; PSU removal if there are two PSUs
Chapter 4 Turning on the Avaya P460 Avaya P460 Installation and Maintenance Guide 23 Power Management The Supervisor module checks the PSU status every three seconds by comparing the current state to the previously saved PSU state. Figure 4.2 Power Management Priority The Power Management Process L ...
Page 38 - set slot power; I/O Module Power Management Process
Chapter 4 Turning on the Avaya P460 24 Avaya P460 Installation and Maintenance Guide • You can also administratively enable/disable power supply to a specific I/O module slot with the set slot power CLI command. L The power allocation configuration is saved in NVRAM and treated as any other switch c...
Page 39 - active
Avaya P460 Installation and Maintenance Guide 25 Chapter 5 Avaya P460 Panels Introduction This chapter describes the front panels of the P460 switch modules, including the LEDs, ports and buttons. M460ML-SPV Panel M460ML-SPV modules can operate in three modes: Active, Standby and Halted. Each mode i...
Page 40 - Active M460ML-SPV FastETH LED
Chapter 5 Avaya P460 Panels 26 Avaya P460 Installation and Maintenance Guide Table 5.3 summarizes the functions of the LEDs for a standby or halted M460ML-SPV supervisor module. PWR Power information ON Power is up Blinking Power management error: the switch cannot supply power to at least one modul...
Page 41 - ACT LED and OPR LED Summary; Standby M460ML-SPV FastETH LED
Chapter 5 Avaya P460 Panels Avaya P460 Installation and Maintenance Guide 27 ACT LED and OPR LED Summary Table 5.5 summarizes the states of the ACT and OPR LEDs Fast ETH Management outband Ethernet link status OFF Table 5.4 Standby M460ML-SPV FastETH LED LED Description State Meaning FastETH Managem...
Page 42 - Function LEDs; M460ML-SPV Function LEDs; Starting Point
Chapter 5 Avaya P460 Panels 28 Avaya P460 Installation and Maintenance Guide Function LEDs Figure 5.2 M460ML-SPV Function LEDs Use the L (Left) and R (Right) pushbuttons to select the information displayed for all the port LEDs on the installed I/O modules. Press the button to cycle through the opti...
Page 44 - or
Chapter 5 Avaya P460 Panels 30 Avaya P460 Installation and Maintenance Guide *Not currently implemented LAG Link Aggregation Group ON Port is a member of a LAG OFF Port is not a member of a LAG PoE* Power over Ethernet ON PoE is enabled and power is being supplied to an end-station Blinking • PoE en...
Page 45 - M460ML-SPV Supervisor Module Ports; M460ML-SPV Supervisor Module Console Ports; M460ML-SPV Left and Right Pushbuttons; P460 Supervisor Module Left and Right Pushbutton; M460ML-SPV Left and Right Pushbutton Functions
Chapter 5 Avaya P460 Panels Avaya P460 Installation and Maintenance Guide 31 M460ML-SPV Supervisor Module Ports Figure 5.4 M460ML-SPV Supervisor Module Console Ports Key 1 Eth (Ethernet) Port 2 RS-232 (Serial) port Eth Port (Outband Connection) A 10/100BASE-T port with an RJ-45 connector for managin...
Page 46 - P460 Supervisor Module ASB Pushbutton
Chapter 5 Avaya P460 Panels 32 Avaya P460 Installation and Maintenance Guide M460ML-SPV ASB (Alternate Software Bank) Pushbutton Figure 5.6 P460 Supervisor Module ASB Pushbutton L See “Supervisor Module does not Boot“ in “Troubleshooting the Installation“ for information.
Page 47 - Power Supply Panel; P460 Power Supply Front Panel; Power Supply Status LED
Chapter 5 Avaya P460 Panels Avaya P460 Installation and Maintenance Guide 33 Power Supply Panel P460 Power Supply Front Panel Key 1 Status LED 2 Power inlet 3 Power switch Table 5.8 Power Supply Status LED LED Description State Meaning Power Supply Status Green Power supply functioning Orange Power ...
Page 49 - Chapter 6; Maximizing Avaya P460 Availability; Active; show spv; ACT and OPR LED Summary
Avaya P460 Installation and Maintenance Guide 35 Chapter 6 Maximizing Avaya P460 Availability Introduction In order to maximize availability of the Avaya P460 for applications such as VoIP, you can deploy a variety of redundancy mechanisms.This chapter describes the Supervisor module and I/O module ...
Page 50 - Synchronizing the Supervisor Modules Manually
Chapter 6 Maximizing Avaya P460 Availability 36 Avaya P460 Installation and Maintenance Guide Configuring the Supervisor Modules for Active/Standby Operation In order to operate in an Active-Standby configuration, the two SPVs must be synchronized. • If the Supervisor modules are not synchronized, o...
Page 51 - Configuration File Synchronization; Initial configuration; sync spv
Chapter 6 Maximizing Avaya P460 Availability Avaya P460 Installation and Maintenance Guide 37 L The following screen capture shows the process: Note: After the transfer is finished, the Supervisor modules are reset automatically. — After the reset the configuration files of the Active Supervisor Mod...
Page 52 - Layer 3 startup configuration
Chapter 6 Maximizing Avaya P460 Availability 38 Avaya P460 Installation and Maintenance Guide • Layer 3 startup configuration is saved in the Standby SPV when you execute the copy running-config startup-config CLI command. This configuration is also saved in the Active SPV L The Layer 3 running conf...
Page 53 - Redundant Power Supplies
Chapter 6 Maximizing Avaya P460 Availability Avaya P460 Installation and Maintenance Guide 39 Redundant Power Supplies The Avaya P460 supports automatic Power Supply redundancy and load-sharing. Power supply redundancy is activated according to the number of PSUs and I/O modules you have installed i...
Page 54 - Calculating the Power Budget; two
Chapter 6 Maximizing Avaya P460 Availability 40 Avaya P460 Installation and Maintenance Guide Calculating the Power Budget You can also calculate how many PSUs you need in order to provide redundancy for a specific configuration.You need to add the power requirements for the I/O modules installed to...
Page 55 - Chapter 7; Establishing Switch Access; M460ML-SPV Supervisor Module Serial Console Port; root
Avaya P460 Installation and Maintenance Guide 41 Chapter 7 Establishing Switch Access Introduction This chapter describes how to access the Avaya P460 CLI from the following devices:• A terminal to the serial port on the Supervisor Module • A workstation running a Telnet session connected via an I/O...
Page 56 - Establishing a Telnet Connection with the Switch (Inband); Start
Chapter 7 Establishing Switch Access 42 Avaya P460 Installation and Maintenance Guide Note: If you connect your terminal to the Standby SPV, you can get access to all the CLI commands by opening a Session to the Active SPV. (See the Session command on page 63). Establishing a Telnet Connection with ...
Page 57 - Avaya P460 Reference Guide; Establishing a Telnet Connection with the Switch (Outband); M460ML-SPV Supervisor Module Fast Ethernet Console Port
Chapter 7 Establishing Switch Access Avaya P460 Installation and Maintenance Guide 43 Note: For more detailed information on the CLI commands, please refer to the Avaya P460 Reference Guide Establishing a Telnet Connection with the Switch (Outband) Figure 7.2 M460ML-SPV Supervisor Module Fast Ethern...
Page 58 - Outband Interface Connection CLI Commands
Chapter 7 Establishing Switch Access 44 Avaya P460 Installation and Maintenance Guide L You can now configure the P460. L You can connect the Out-band interface to either of the Supervisor modules. Outband Interface Connection CLI Commands In order to... Use the following command... Configure the ma...
Page 59 - Redundant Outband Connections
Chapter 7 Establishing Switch Access Avaya P460 Installation and Maintenance Guide 45 Redundant Outband Connections You can create a redundant outband management connection by connecting both Supervisor modules to the NMS via the Fast Ethernet interface by a switch (see Figure 7.3). Figure 7.3 Redun...
Page 60 - Establishing a PPP via Modem Connection with the P460 (Sideband); Overview
Chapter 7 Establishing Switch Access 46 Avaya P460 Installation and Maintenance Guide Establishing a PPP via Modem Connection with the P460 (Sideband) Overview The Point-to-Point Protocol (PPP) provides a Layer 2 method for transporting multi-protocol datagrams over point-to-point links. Here only I...
Page 61 - Setting Up Sideband (PPP) Connection Configuration; Please check that the proprietary modem cable is plugged
Chapter 7 Establishing Switch Access Avaya P460 Installation and Maintenance Guide 47 Setting Up Sideband (PPP) Connection Configuration L You need to configure an IP address and netmask for the sideband interface before you can establish a ppp link. 1 Connect a terminal to the Serial console port. ...
Page 63 - Avaya MSNM P460 Manager
Avaya P460 Installation and Maintenance Guide 49 Chapter 8 Avaya MSNM P460 Manager The P460 Manager provides the following features:• Device Configuration - Viewing and modifying the different device configurations. • Virtual LANs - Viewing and editing Virtual LAN information. • Link Aggregation Gro...
Page 64 - Running the Avaya MSNM P460 Manager; The Welcome Page
Chapter 8 Avaya MSNM P460 Manager 50 Avaya P460 Installation and Maintenance Guide Running the Avaya MSNM P460 Manager Note: You should assign an inband or out-of-band interface IP address to the switch before beginning this procedure. 1 Open your browser. 2 Enter the URL of the switch in the format...
Page 65 - — If you do; not; have the Java plug-in installed, follow the instructions on the
Chapter 8 Avaya MSNM P460 Manager Avaya P460 Installation and Maintenance Guide 51 X If you have the Java plug-in installed, the P460 Manager should open in a new window (see Figure 8.2) Figure 8.2 P460 Device Manager — If you do not have the Java plug-in installed, follow the instructions on the We...
Page 66 - Installing the Java Plug-in; Installing from the P460 Documentation and Utilities CD
Chapter 8 Avaya MSNM P460 Manager 52 Avaya P460 Installation and Maintenance Guide Installing the Java Plug-in If the network manager has configured the system, the plug-in should be installed automatically. If the plug-in is not installed automatically, then you have three options for installing it...
Page 67 - Installing the On-Line Help and Java Plug-In on your Web Site
Chapter 8 Avaya MSNM P460 Manager Avaya P460 Installation and Maintenance Guide 53 Installing the On-Line Help and Java Plug-In on your Web Site Note: This procedure is optional Copying the help files and Java plug-in to a local Web server allows users to access the on-line help for the Embedded Man...
Page 69 - Chapter 9; User Authentication; Access Levels; Access Level Descriptions
Avaya P460 Installation and Maintenance Guide 55 Chapter 9 User Authentication Introduction User Authentication is an important element of maintaining secure networks. It prevents unauthorized network management and stops users from reconfiguring network devices. Local User Accounts The Local User A...
Page 70 - Local User Account CLI Commands; The Web management passwords are the same as those of the CLI. If you
Chapter 9 User Authentication 56 Avaya P460 Installation and Maintenance Guide Note: If you wish to increase security, you can change the default user accounts and SNMP communities. Local User Account CLI Commands Note: The Web management passwords are the same as those of the CLI. If you change the...
Page 71 - RADIUS; Introduction to RADIUS
Chapter 9 User Authentication Avaya P460 Installation and Maintenance Guide 57 RADIUS Introduction to RADIUS Local user accounts (see “Local User Accounts“ on page 55) are kept locally on the switch. Therefore, if a site contains multiple Avaya Switches, it is necessary to configure each switch with...
Page 72 - Figure 9.1 illustrates the RADIUS authentication procedure:; RADIUS CLI Commands; set radius authentication
Chapter 9 User Authentication 58 Avaya P460 Installation and Maintenance Guide Figure 9.1 illustrates the RADIUS authentication procedure: Figure 9.1 RADIUS Authentication Procedure RADIUS CLI Commands In order to... Use the following command... Enable or disable authentication for the P460 switch. ...
Page 73 - set radius authentication udp-port
Chapter 9 User Authentication Avaya P460 Installation and Maintenance Guide 59 Set the RFC 2138 approved UDP port number. set radius authentication udp-port Set the number of times an access request is sent when there is no response set radius authentication retry-number Set the time to wait before ...
Page 74 - Allowed Managers; Allowed Manager CLI Commands; set allowed managers
Chapter 9 User Authentication 60 Avaya P460 Installation and Maintenance Guide Allowed Managers With the Allowed Managers feature, the network manager can determine who may or may not gain management access to the switch. The feature can be enabled or disabled (default is disabled). When enabled, on...
Page 75 - Configuration Defaults; Default System Parameters
Avaya P460 Installation and Maintenance Guide 61 Chapter 10 Configuration Defaults Introduction This chapter defines the default parameters for the P460 switch. Default System Parameters Table 10.1 Default System Parameters Parameter Default Value All IP addresses N/A (0.0.0.0) Default gateway N/A (...
Page 76 - Configuration Default CLI Commands
Chapter 10 Configuration Defaults 62 Avaya P460 Installation and Maintenance Guide Configuration Default CLI Commands Read-write SNMP community string public Trap SNMP community string public Number of SNMP retries 3 SNMP timeout 2,000 Intelligent multicast Disabled Boot bank B Broadcast storm contr...
Page 77 - Basic Switch Configuration
Avaya P460 Installation and Maintenance Guide 63 Chapter 11 Basic Switch Configuration Introduction This chapter describes the parameters you can define for the chassis, such as its name and location, time parameters, and so on.Use the CLI commands briefly described below for configuring the display...
Page 78 - System Parameter Configuration; Identifying the system
Chapter 11 Basic Switch Configuration 64 Avaya P460 Installation and Maintenance Guide System Parameter Configuration Identifying the system In order to make a P460 switch easier to identify, you can define a name for the switch, contact information for the switch technician and the location of the ...
Page 79 - Time Parameter Configuration; Feature Activation
Chapter 11 Basic Switch Configuration Avaya P460 Installation and Maintenance Guide 65 Time Parameter Configuration Feature License Configuration Certain features in the Avaya P460 are activated by “Feature Licenses.” A sample activation procedure for these features is described below: Feature Activ...
Page 80 - Obtaining a License Key
Chapter 11 Basic Switch Configuration 66 Avaya P460 Installation and Maintenance Guide Obtaining a License Key To obtain a License Key that enables routing features: 1 Go to http://license-lsg.avaya.com and click “request new license”. 2 Enter the Certificate Key and Certificate Type. 3 Click Next ....
Page 81 - View number of licenses left.; Generate; The feature-enabling license code is generated
Chapter 11 Basic Switch Configuration Avaya P460 Installation and Maintenance Guide 67 X View number of licenses left. 6 Enter the serial number of the switch. To identify serial numbers use the show chassis-identity CLI command: . 7 Click Generate . X The feature-enabling license code is generated
Page 82 - Activating a Routing License Key; set license; license; Feature License CLI Commands
Chapter 11 Basic Switch Configuration 68 Avaya P460 Installation and Maintenance Guide Activating a Routing License Key To activate a Routing License Key: 1 Enter the acquired Routing License Key into the M460ML-SPV module using the set license CLI command. set license [license] [featureName] where:...
Page 83 - Troubleshooting the Installation; Powering up the Chassis
Avaya P460 Installation and Maintenance Guide 69 Chapter 12 Troubleshooting the Installation Introduction Powering up the Chassis Powering up the Supervisor Modules Powering up the Fan Module Problem Possible Cause Solution Chassis does not power up No PSU (Power Supply Unit) installed Install PSU (...
Page 84 - Powering up the I/O Modules
Chapter 12 Troubleshooting the Installation 70 Avaya P460 Installation and Maintenance Guide Powering up the I/O Modules Problem Possible Cause Solution I/O modules do not power up No Supervisor module installed Install supervisor module (see “Supervisor Module Installation“ on page 14) Supervisor m...
Page 85 - Supervisor Module does not Boot
Chapter 12 Troubleshooting the Installation Avaya P460 Installation and Maintenance Guide 71 Supervisor Module does not Boot Problem Possible Cause Solution OPR LED does not light. Supervisor Module has not booted. Use the “ASB” (Alternate Software Bank) button to switch to the second firmware bank....
Page 87 - Maintenance; See “I/O Module Installation” on page 16.; Replacing Supervisor Modules; One Supervisor Module in the Switch; If you remove the Active Supervisor module, the
Avaya P460 Installation and Maintenance Guide 73 Chapter 13 Maintenance Introduction This chapter provides some basic information for downloading firmware to the Avaya P460. For issues that are not covered in “Troubleshooting the Installation“ or this chapter, please contact your Avaya representativ...
Page 88 - Firmware Download; copy tftp; Booting from the Alternate Firmware Bank
Chapter 13 Maintenance 74 Avaya P460 Installation and Maintenance Guide One of the SPVs can operate as Standby automatically only if both of the following conditions are fulfilled:• The current chassis is the last one in which you inserted this SPV • The current running SW images are the same versio...
Page 89 - Firmware Download CLI Commands; Configuration File Management; Configuration Management CLI Commands
Chapter 13 Maintenance Avaya P460 Installation and Maintenance Guide 75 Firmware Download CLI Commands Configuration File Management You can transfer the Layer 2 parameters to or from the current NVRAM running configuration file to a TFTP server.This feature permits you to make a backup of the param...
Page 91 - Standards; IEEE; Layer 2
Avaya P460 Installation and Maintenance Guide 77 Chapter 14 Standards Introduction The Avaya P460 complies with the following standards: IEEE • IEEE 802.3x Flow Control • IEEE 802.1q/p VLAN Tagging and 802.1p compatible • IEEE 802.1D Spanning Tree protocol IETF Layer 2 • RFC-0868 Time Protocol • RFC...
Page 92 - Layer 3; Routing
Chapter 14 Standards 78 Avaya P460 Installation Guide Layer 3 • RFC-791 Internet Protocol • RFC-792 Internet Control Message Protocol • RFC-826 Ethernet Address Resolution Protocol • RFC-894 Standard for the transmission of IP datagrams over Ethernet • RFC-922 Broadcasting Internet datagrams in the ...
Page 93 - Specifications; Physical
Avaya P460 Installation and Maintenance Guide 79 Chapter 15 Specifications Physical Height 10U (17.5", 444.5 mm) Width 17.4" (442 mm) Depth 15" (375 mm) Weight Chassis + backplane 13 kg (28.6 lb.) Fan module 2.3 kg (5.1 lb.) Supervisor module 2.0 kg (4.4 lb.) 300W AC PSU 3.85 kg (8.5 lb....
Page 94 - Power Requirements; Components; Environmental
Chapter 15 Specifications 80 Avaya P460 Installation and Maintenance Guide Power Requirements MPS4603-AC Power Supply Components Environmental Safety • UL for US approved according to UL60950 Std. • C-UL (UL for Canada) approved according to C22.2 No.950 Std. • CE for Europe approved according to EN...
Page 95 - EMC Emissions; Immunity; NTSB
Chapter 15 Specifications Avaya P460 Installation and Maintenance Guide 81 device with a 16A rating must be incorporated in series with building Installation and Maintenance AC power wiring for the equipment under protection. EMC Emissions Approved according to: • US - FCC Part 15 sub part B, class ...
Page 96 - Catalog Numbers; Avaya P460 Catalog Numbers
Chapter 15 Specifications 82 Avaya P460 Installation and Maintenance Guide Catalog Numbers Table 15.1 Avaya P460 Catalog Numbers Product Description Material Code PEC Code Avaya P460-CH P460 chassis 7000254998 4548-001 Avaya M460ML-SPV P460 supervisor module 700255011 4548-002 Avaya M4648ML-T P460 M...