Page 3 - Safety Precautions; Markings and Symbols; Disassembly and Modification
E-1 Warning Caution Danger Safety Precautions Congratulations upon your selection of this CASIO product. Be sure to read thefollowing Safety Precautions before trying to use it for the first time. Markings and Symbols The following are the meanings of the markings and symbols used in these SafetyPre...
Page 4 - Warning; Foreign Objects; Keep your Handheld Terminal at least 22 centimeters (8
E-2 Warning Foreign Objects • Should any foreign matter get into the Handheld Terminal and its options,immediately turn off the power and contact your original vendor or anauthorized CASIO service provider. Continued use creates the danger of fireand electric shock. Dropping and Damage • Should you ...
Page 5 - Caution; – Should liquid from the LCD panel accidentally get into your mouth,
E-3 Caution Foreign Objects • Take care to ensure that metals or combustible objects are not inserted intothe openings of the Handheld Terminal and its options. Such the objectsinside of the Handheld Terminal create the danger of fire and electric shock. Location • Do not locate the Handheld Termina...
Page 7 - Danger of explosion if the battery pack is incorrectly replaced.
E-5 Warning • Never place the battery pack in a microwave oven or any other high-voltage device. Doing so creates the danger of battery pack heat emission,explosion, and fire. • Should the battery pack emit a strange odor or heat, change color or shape, orexhibit any other abnormal behavior, immedia...
Page 8 - Be sure to turn the power off and unplug the power cord after use.
E-6 AC Power Supply Warning • Do not use the Handheld Terminal at a voltage other than the specifiedvoltage. Also, do not connect the Handheld Terminal to a multi-plug powerstrip. Doing so creates the danger of fire and electric shock. • Avoid conditions that can cause damage or breaks in the power ...
Page 9 - The housing of the AC adaptor can become warm during normal use.; Backup Copies of All Important Data
E-7 AC Adaptor Caution • The housing of the AC adaptor can become warm during normal use. • Take normal precautions against electric shock. • At least once a year, unplug the AC adaptor from the wall outlet and cleanany dust that builds up between the prongs of the plug. Dust built up between the pr...
Page 10 - Operating Precautions; Use the Handheld Terminal and its options; — Large amounts of static electricity
E-8 Operating Precautions Your Handheld Terminal and its options is a precision digital instrument. Improperoperation or rough handling can cause problems with data storage and other problems.Note and observe the following precautions to ensure proper operation. • Do not continue operating the Handh...
Page 11 - Important; The contents of this guide are subject to change without notice.; After Service
E-9 Important • The contents of this guide are subject to change without notice. • Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any thirdparties for any losses or damages arising from the use of this guide. • This guide does not include any information about programming and ...
Page 14 - Contents
E-12 Contents Safety Precautions ......................................................................................... E-1 Operating Precautions ................................................................................... E-8 Important ........................................................
Page 16 - Before Getting Started; Load the battery pack into the Handheld Terminal.
E-14 Before Getting Started Be sure to perform the following steps before trying to use the Handheld Terminal forthe first time. 1. When unpacking, make sure that everything is included. Open the box and make sure that all the items shown here are included. Handheld Terminal Stylus Neck Strap Touch ...
Page 17 - Start up the application you want to run.; Using the stylus; Lightly tap with the stylus once on the touch screen.
E-15 2 Load a battery pack (DT-5123BAT) or large-capacity battery pack (DT-5124LBAT).Take care that the battery pack is oriented correctly when you load it. In addition,load the battery back while making sure that the end of the battery pack removaltape is protruding above the battery pack. 3 Replac...
Page 18 - Handheld Terminal System Configuration; Cradle-type Battery Charger
E-16 Handheld Terminal System Configuration Options IT-500 Series Bridge Satellite Cradle (IT-564IOE) Bridge Basic Cradle (IT-560IOE) Required AC Adaptor(AD-S42120A) Cradle-type Battery Charger Required AC Adaptor(AD-S42120A) DT-891WH RequiredScrews RequiredScrews IT-569CHGE Wall Mount Unit
Page 20 - Cables
E-18 Cables Bridge Satellite Cradle Cable/RS-232C Dsub-9Pin (Female)Bridge Daisy Chain CableUSB Cable Level converter Cable DT-887AXADT-888RSCDT-380USB DT-5180RSC
Page 21 - General Guide
E-19 1 Indicator 1 2 Indicator 2 3 Receiver 4 LCD Panel/TouchScreen 5 Power Key 6 Mic 7 Execute Key 8 Power supplyterminal 9 Numeric Keys 10 CLR Key 11 Fn Key 12 Trigger Key This lamp indicates the charge status of the battery pack.Red: ChargingGreen: Charging complete Indicates the result of a barc...
Page 23 - Replacing the Battery; The backup battery is installed inside of the Handheld Terminal.; This guide uses the following terms to refer to the batteries.; Built-in battery for memory backup; Replacing the Battery Pack; Always keep backup copies of all important data!
E-21 Replacing the Battery Your Handheld Terminal uses two types of battery: a battery pack and a memorybackup battery.The battery pack is used to power normal operations and to store data, while thememory backup battery provides the power required to maintain memory contentswhen the battery pack po...
Page 24 - To replace the battery pack; Make sure that the Handheld Terminal is turned off.
E-22 To replace the battery pack 1. Make sure that the Handheld Terminal is turned off. If the power is on, press the power key to turn it off. 2. Turn over the Handheld Terminal. 3. Turn the battery pack lock switch on the back of the Handheld Terminal to the "FREE" position, and then remov...
Page 25 - the rechargeable battery pack cover switch to the “LOCK” position.
E-23 6. Replace the rechargeable battery pack cover as shown in the diagram and then return the rechargeable battery pack cover switch to the “LOCK” position. Loading the large-capacity battery pack into the HandheldTerminal After loading the large-capacity battery pack, you need to use the special ...
Page 26 - Attaching the Neck Strap; To attach the neck strap; formed by the thin cord.; Do not swing the Handheld Terminal around holding the neck strap.
E-24 Attaching the Neck Strap Be sure to attach the neck strap and use it to protect against dropping the HandheldTerminal when carrying it around. To attach the neck strap 1. Pass the thin cord of the neck strap through the neck strap hole on the back of the Handheld Terminal. 2. Pass the other end...
Page 27 - Attaching the Touch Screen Protective Sheet
E-25 Attaching the Touch Screen Protective Sheet Attach the touch screen protective sheet according to the procedure described below. Important! Do not press on the touch screen with excessive force when attaching the touchscreen protective sheet. This can damage the touch screen. 1. Switch the powe...
Page 28 - Configuring Handheld Terminal Settings; Calibrating Touch Screen Alignment; Press the Execute key or tap anywhere on the touch screen.
E-26 Configuring Handheld Terminal Settings Calibrating Touch Screen Alignment Whenever the response of the touch screen is poor, or the operations being executed donot match with the location you are tapping on the touch screen, please recalibrate thealignment of the touch screen using the followin...
Page 30 - Using the Laser Scanner; press the trigger key.; is possible may vary according to the type of bar code.
E-28 Using the Laser Scanner 1. After turning on the power, position the laser scanner close to a bar code and then press the trigger key. 2. The laser emits light and scans the bar code. If scanning is completed normally, Indicator 2 displays a green light and a buzzer sounds. If the bar code was n...
Page 31 - Warning Label; CAUTION; Bar Code Scanning Position; Never look directly into the laser light.
E-29 Warning Label LASER LIGHTDO NOT STARE INTO BEAMCLASS 2 LASER 1mW 650nmIEC650825-1:1993 + A1:1997 • This label is a warning and caution label for Class 2 laser products that complywith IEC60825-1:1993+A1:1997. • Although Class 2 laser light is only emitted momentarily, never look directly intoth...
Page 32 - Performing Data Communication; IR Data Communication
E-30 Performing Data Communication IR Data Communication IR data communication can be used to transfer data between two Handheld Terminals.When performing IR data communication, orient the IR ports of both HandheldTerminals so they are pointing directly at each other.The ports can be in direct conta...
Page 33 - Bluetooth
E-31 Bluetooth TM Data Communication (IT-500M30B/M30CB) Bluetooth TM protocol can also be used to transfer data between two Handheld Terminals.With Bluetooth TM the two Handheld Terminals should be located within about three meters (9 '10 3 ⁄ 8 " ) from each other, as long as there is nothing bl...
Page 34 - Resetting the Handheld Terminal; If reset does not find a memory problem; The Handheld Terminal restarts, and normal operation is restored.; If reset finds a memory problem
E-32 Resetting the Handheld Terminal Resetting the Handheld Terminal is the same as restarting a computer. Performing areset causes all unsaved inputs and edits to be lost, but data that is already stored in thememory as well as all settings should be unaffected.Use reset to restore normal operation...
Page 35 - To perform a full reset; the message shown below appears on the display.; Memory All Clear Warning
E-33 Performing a Full Reset (Initialization) Performing a full reset initializes memory. This means that all data stored in thememory (RAM) is deleted and all the settings are returned to their initial factorydefaults. Perform a full reset whenever any one of the following conditions exists. • When...
Page 36 - IT-500 Specifications
E-34 IT-500 Specifications Model: IT-500M30, IT-500M30R, IT-500M30B, IT-500M30CR,IT-500M30F, IT-500M30CF, IT-500M30CB CPU: Intel ® PXA255 Application Processor (400MHz max.) Memory: 32MB RAM; 32MB Flash ROM (FlashFX built in) OS: Microsoft ® Windows ® CE.NET operating system, English Version Display...
Page 40 - Connecting the AC Adaptor and Connecting to Computer; USB Connection
E-38 Connecting the AC Adaptor and Connecting to Computer Use the AC adaptor available as option for the Bridge Satellite Cradle/Bridge BasicCradle to supply the power to it. Always make sure that the power is being supplied tothe Bridge Satellite Cradle/Bridge Basic Cradle by the AC adaptor before ...
Page 41 - power indicator lamp to light in red.; Shorting the power contacts can damage the Cradle.
E-39 4. Turn on the power. This causes the Bridge Satellite Cradle/Bridge Basic Cradle power indicator lamp to light in red. 5. Making sure that their two IR ports come into contact with each other, place the IT-500 onto the Bridge Satellite Cradle/Bridge Basic Cradle. This causes theBridge Satellit...
Page 42 - Host Computer Interface; Daisy Chain; Bridge Satellite Cradle Data Rate
E-40 Configuring DIP Switch Settings (IT-564IOE only) Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches.You can change the ON/OFF settings of the DIP swiches to set the configuration.Please, set after swiching OFF the power. Not used (Always off) Not used (Always o...
Page 43 - Using Wall Mount Unit; Cradle, and secure it in place with the wall mount unit screws.
E-41 Using Wall Mount Unit The following procedure explains how to use the optional wall mount unit (DT-891WH)to configure the Bridge Satellite Cradle/Bridge Basic Cradle for a wall-mountedconfiguration. 1. Affix the wall mount unit to the bottom of the Bridge Satellite Cradle/Bridge Basic Cradle, a...
Page 44 - Loosen the upper screw and lower screw.
E-42 5. Drive the upper screw and lower screw into the wall the rest of the way. To remove the Bridge Satellite Cradle/Bridge Basic Cradle from thewall 1. Loosen the upper screw and lower screw. 2. Raise the Bridge Satellite Cradle/Bridge Basic Cradle and remove it from the screws. Important! • Whil...
Page 45 - Use the modular cable for the connections.
E-43 Connecting Multiple Bridge Satellite Cradles (IT-564IOE) Use the modular cable for the connections. You can daisy chain multiple Bridge Satellite Cradles by connecting the C-OUT port ofthe first unit that is the nearest to the host computer to the C-IN port of the next unitthat is sitting to th...
Page 47 - Using the Cradle-type Battery Charger
E-45 Using the Cradle-type Battery Charger The optionally available Cradle-type Battery Charger (IT-569CHGE) lets you chargethe Handheld Terminal’s battery simply by placing the Handheld Terminal onto thecharger.An optional wall mount unit lets you mount the Cradle-type Battery Charger on a wall. Ge...
Page 49 - Connecting the AC Adaptor for Cradle-type Battery Charger; Shorting the power contacts can damage.
E-47 Connecting the AC Adaptor for Cradle-type Battery Charger Use the special AC adaptor for the Cradle-type Battery Charger to connect to a walloutlet. 1. After making sure that the Cradle-type Battery Charger power switch is turned off, plug the AC adaptor into the AC adaptor jack on the back of ...
Page 50 - Charging Specifications; Dimensions and Weight
E-48 Using Wall Mount Unit To wall mount the Cradle-type Battery Charger, use the same procedure as thatdescribed for the Bridge Satellite Cradle (IT-564IOE)/Bridge Basic Cradle (IT-560IOE)on page 41. Cradle-type Battery Charger (IT-569CHGE) Specifications 1. Charging Specifications Charging System:...
Page 51 - Using the Dual Battery Charger
E-49 Using the Dual Battery Charger The optionally available Dual Battery Charger (DT-5122CHG) allows for serialcharging of two rechargeable battery packs. General Guide Front Top Bundled Items Connection Bracket2 screws Option AC Adaptor MPC-577ADP 2 3 1 1 3 3 4 4 Back
Page 53 - Charging a Battery Pack; Plug the optional AC adaptor into a wall outlet.; Charge Indicator Lamp; Not charging
E-51 Charging a Battery Pack 1. Plug the other end of the AC adaptor into the AC adaptor jack of the Dual Battery Charger. 2. Plug the optional AC adaptor into a wall outlet. 3.Taking care that the battery pack is oriented correctly, insert it into the Dual Battery Charger. This causes the Charge In...
Page 54 - Connecting Multiple Dual Battery Chargers; Chargers you want to connect to each other.
E-52 Connecting Multiple Dual Battery Chargers You can connect up to three Dual Battery Chargers. Doing so makes it possible tosupply power to all the Dual Battery Chargers using one AC adaptor. 1. As shown in the illustrations below, remove the connector covers of the Dual Battery Chargers you want...
Page 56 - Using Rechargeable Battery Pack; Battery Pack Specifications; Large-capacity Battery Pack Specifications
E-54 Using Rechargeable Battery Pack Your Handheld Terminal supports use of two battery pack types of different capacity.You can select the one that best suits your needs in terms of operating time, the type ofoptions you need to use, etc.When using the large-capacity battery pack, you need to use t...
Page 57 - Using the Level Converter Cable; to a serial port of your computer.
E-55 Using the Level Converter Cable The separately sold Level Converter Cable (DT-5180RSC) can be used to connect thisHandheld Terminal to a serial port of your computer. 1. Open the serial port cover of the Handheld Terminal and connect the Level Converter Cable. Connect to RS-232C cable 2. Attach...
