Casio IT-2000- Manual

8 2.3 Installation Method This section describes the installation and setup procedures that must be performed before I/O Box and PC operations are started. The following diagram shows a flow of the setup procedure. Note: For information about the installation procedure of the Upload/Download Utility...

14 Environment Setup If the I/O Box to be connected to the PC is a Satellite I/O Box, select "RS-232C" from the "Configure" menu of the Upload/Download Utility, then select "Settings" from the same menu. Fig. 2.8 RS-232C Main Menu screen In the COM PORT field select the COM p...

15 3. Operation Method After connecting the necessary system devices and installing the software on the PC, perform file upload/download with the following procedure. On this system each function will be executed if the IT-2000, which has started up the FLINK Utility, is mounted on the I/O Box after...

17 3.1.2 Specifying Files from IT-2000 Operation on PC Start up the Upload/Download Utility on the PC and select "Link Manager Start" from the "Execute" menu. Fig. 3.2 Screen displayed after "Link Manager Start" If the preparation has been completed on the IT-2000 side, the p...

18 FLINK.DLL of Windows 3.1 version Start up Windows 3.1. Start up FLINK with the appropriate parameters. DoFLINK ( argc, argv ) argc = 4; argv[ ]= { "fl" , "/s", "D: FILE", "C: yy" } This transfers D: FILE from the IT-2000 to C:yy on the PC. If the preparation has be...

19 3.2 File Download Transfer files from the PC to the IT-2000. There are two methods for specifying the files to be downloaded: specifying files from the PC, and specifying files from the IT-2000. 3.2.1 Specifying Files from PC Operation on PC Start up the Upload/Download Utility on the PC and sele...

23 4. Error Codes and Error Messages Any termination codes and error information generated by the PC will be recorded in the error log file on the PC. This error log file will be created according to the file name specified by the DEVICE.INI file (configuration file), and each new log entry will be ...

25 Error Code categ Detai Error Message Description Remedy 0x04 0x00 ReadOnlyFileAccessError Write is specified to read-only-file. Change the file attribution for write. 0x05 0x00 CommunicationError Communication error. See note 1. 0x05 0x03 SpawnError Spawn error. See note 1. 0x05 0x04 CommandTimou...

26 5. Q and A Common to Satellite and Master I/O Boxes Q1 It seems that it takes a rather long time for communication to start, doesn't it? A1 Communication between the IT-2000 and Satellite/Master I/O Box is performed according to IrDA protocol. Generally, the IrDA protocol requires 2 to 3 seconds ...

27 Q2 If the Windows3.1 version of FLINK is used, the baud rate setup cannot be modified by changing the DIP switch setting for the RS-232C communication speed on the Satellite I/O Box. Why? A2 To modify the RS-232C communication speed with the Windows3.1 version of FLINK, it must be started up with...

29 6. Reference Manuals Besides this IT-2000 I/O Box Installation Manual, the following manuals are available for the IT-2000 system as application program development manual. IT-2000 Upload/Download Utility Manual IT-2000 Technical Reference Manual IT-2000 Hardware Manual

30 7. List of SCSI Boards and SCSI Cables The listed SCSI Boards and Cables below have been assessed for the operability with the IT-2000. Thus, they are recommended for use with the IT-2000. Manufacturer Model SCSI BoardAdaptec AHA1540CP Adaptec AHA2940AU Adaptec AHA1510B Adaptec AHA1542CF SCSI Cab...

31 Appendix Installation Method of Upload/Download Utility Installation The Upload/Download Utility software consists of the following software components: File name Remark LMWIN32.EXE Execution module of the Upload/Download Utility (GUI mode) driver32.dll RS-232C driver hfc32.dll Command analysis d...