Casio HK1223- User Manual

iv Product Safety and RF Exposure Information Caution BEFORE USING THIS RUGGEDIZED LAPTOP , READ THIS SECTION WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERN...

v Medical Devices Pacemakers Keep the antennas of this data terminal at least 8 inches or 20cm away from any person’s body. Along with ensuring compliance with the RF energy exposure limits (as instructed in the RF Energy Exposure section previously), this separation distance meets or exceeds the di...

vi Potentially Explosive Atmospheres Turn off your ruggedized laptop prior to entering any area with a potentially explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury o...

xi The Software may contain one or more items of third-party software supplied by other third-party suppliers. The terms of this Agreement govern Your use of any third-party software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED WITH THIS PACKAGE, IN WHICH CASE YOUR USE OF THE THIRD-PAR...

xii If the affected product is being purchased pursuant to a written Communications System Agreement signed by Motorola, the warranty contained in that written agreement will apply. Otherwise, the following warranty applies. I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: Motorola Inc. or if applicab...

xvii About the Battery Caution Texts Concerning Lithium Batteries DANISH ADVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN ADVARSEL : Eksplosjonsfare ved fei...

xviii FRENCH ATTENTION : II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (...

xx Table of Contents Preface ...................................................................................... vii Chapter 1 Getting Started ..................................................... 1-1 Getting the Computer Running ................................................1-2 Unpacking ........

xxv Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters and 3 appendices. Chapter 1, Getting Started , takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer , te...

xxvi Appendix B, Fingerprint Recognition System , provides information on using the system’s fingerprint recognition system. Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires specia...

CHAPTER 1 Getting Started Congratulations on purchasing this computer. This high performance notebook computer is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conve...

1-2 Getting Started Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter (100~240 VAC, 50/60 Hz) − AC ...

1-4 Getting Started CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC ...

Getting Started 1-5 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer safely , use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the ...

1-6 Getting Started Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not exactly be the same as those shown in this manua...

Getting Started 1-7 Left-Side Components Ref Component Description See Also IR Transceiver Connects an IrDA-compliant device for wireless data transfer. P. 4-5 Bluetooth Transceiver (option) Connects a bluetooth-capable device for wireless data transfer. P. 4-5 Microphone Connector Connects an exter...

1-8 Getting Started Rear Components Ref Component Description See Also DVI-I Port Connects an external monitor with a DVI interface. P. 4-2 Serial Port Connects a serial device, such as an external modem. P. 4-4 Docking Port For connecting to a Port Replicator / car mount (both are available as an o...

Getting Started 1-9 Front Components Ref Component Description See Also Wireless Modem Antenna Serves as the antenna for the optional wireless modem (RDLAP, GPRS, iDEN, and CDMA). P. 2-24 Stereo Speaker Set Sends out sound and voice from the computer. P. 2-19 Handle Allows you to carry your computer...

1-10 Getting Started Bottom-Side Components Ref Component Description See Also X-bay Module Antenna Connector Serves as the interface between the system and antenna of the optional X-bay module. DVD/Combo/ DVD Dual Drive Lock/ Unlock Switch Allows you to lock the DVD/Combo/DVD Dual drive in place. P...

1-14 Getting Started Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose… Do this… To know more about the computer… Go on to the next chapter. To install the operating system if your dealer has not already done so… See the oper...

CHAPTER 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts c...

2-2 Operating Your Computer Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard dis...

2-4 Operating Your Computer Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Nume...

Operating Your Computer 2-5 Cursor-Control Keys NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 1...

2-6 Operating Your Computer Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTES: When the numeric keypad is activated and you need to type the English letter in the keypad area, you...

Operating Your Computer 2-7 Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press ...

Operating Your Computer 2-9 Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTES: By default, the touchpad is disabled. Use the Fn+F7 hot keys to enable/disable this function. The touchpad indicator found on the keyboard...

Operating Your Computer 2-11 Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of the on-scr...

Operating Your Computer 2-13 Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored. Your ...

2-16 Operating Your Computer Inserting and Removing a Disc Follow this procedure to insert or remove a disc. 1. Turn on the computer. 2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended. 3. To insert a disc, place down the disc in the tra...

Operating Your Computer 2-17 Using the Video Features The video subsystem of your computer features: 12.1-inch Display: 12.1-inch TFT (Thin-Film Transistor) color LCD display with 1024 × 768 XGA (eXtended Graphics Array) resolution 64 MB integrated video memory Simultaneous display on LCD and extern...

2-18 Operating Your Computer NOTES: Before using the dual view capability, the video driver supplied with your computer must be installed. System enters Standby/Hibernation mode when the LCD is closed. If you want to use the computer with the LCD closed, set Do Nothing to the “When I close the lid o...

Operating Your Computer 2-19 Using the Audio Features NOTES: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed (see chapter 6 for details). If you experience interference while recording, try lowering the microphone recording volume....

2-20 Operating Your Computer Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. Audio Output Connector ( ) can be connected to the line-in c...

Operating Your Computer 2-21 Using the Communication Features Using the LAN NOTE for Windows 2000: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. The internal 10/100Base-T Ethernet LAN (Local Area Network) module allows you to connect your compute...

2-24 Operating Your Computer WLAN card was provided by your dealer instead of the computer manufacturer, contact your dealer for the correct driver to use. It takes approximately 30 seconds for your computer to make a successful WLAN connection and approximately 10 seconds to disconnect. NOTE: The F...

Operating Your Computer 2-25 3. Depending on the settings, you may be asked to enter a WEP key (refer to your Windows online help for more information on setting a wireless network connection). Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer...

CHAPTER 3 Managing Power Your computer operates either on external AC power or internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include:...

3-2 Managing Power AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas...

Managing Power 3-3 Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience ...

3-4 Managing Power NOTE: The battery level may automatically lessen due to the self-discharge process (0.21% per day), even when the battery pack is fully charged (100%). This happens no matter if the battery pack is installed in the computer. Initializing the Battery Pack You need to initialize a n...

Managing Power 3-5 Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble t...

3-6 Managing Power 5. Replace the battery pack compartment cover and secure the four screws. Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10% (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Power...

CHAPTER 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and...

4-2 Expanding Your Computer Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor that supports the DVI interface to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the...

Expanding Your Computer 4-3 Connecting a USB Device Your computer has two USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. USB is specified to be an industry standard extension to th...

4-4 Expanding Your Computer Connecting a Serial Device Your computer has a serial port for connecting a serial device such as an external modem. Follow this procedure to connect a serial device: 1. Make sure the “COM1 Settings” item is set properly in the SCU program. (See “Advanced Menu” in Chapter...

Expanding Your Computer 4-5 Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared-equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). Follow this procedure to connect an IR device: 1. Under Windows, make sure that th...

Expanding Your Computer 4-7 Connecting a Video Capture Device NOTE: To take advantage of the AV input port, the Video Capture driver supplied with your computer must be installed (see chapter 6 for details). Your computer has an AV input port on the rear of the computer for connecting a video captur...

4-8 Expanding Your Computer System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin DDR SO-DIMM slots. However, to avoid damage during the installation procedure, please ask your dealer for help.

5-2 Setup Configuration Utility (SCU) When and How to Use the SCU Program When to Use You need to run the SCU program when: You see an error message on the screen requesting you to run Setup. You want to restore the factory default settings. You want to modify some specific settings according to the...

Setup Configuration Utility (SCU) 5-3 Moving Around and Making Selections A brief description of keyboard usage is listed next: Key Function ← , → Selects a menu title. ↑ , ↓ 1) Selects an item or option. 2) Brings up/down the value. Enter 1) Brings up the sub-menu when available. 2) Opens or closes...

5-4 Setup Configuration Utility (SCU) Main Menu Date and Time Sets the system time (Hour, Minute, Second) and date (Month, Day, Year).

Setup Configuration Utility (SCU) 5-5 Internal Numlock Sets if you can enter a number when Num Lock is turned off. When this item is enabled, you can press and hold Fn , and then press a letter key to enter a number even if Num Lock is turned off. When this item is disabled, you cannot enter a numbe...

5-6 Setup Configuration Utility (SCU) Advanced Menu Geyserville Support

Setup Configuration Utility (SCU) 5-7 Enables or disables the Geyserville feature of the CPU. The Geyserville feature helps conserve battery life by decreasing the CPU’s running speed under certain conditions while still maintaining a high performance. If this item is enabled, the CPU will automatic...

5-8 Setup Configuration Utility (SCU) COM Ports Allows you to configure the COM ports of the computer. COM1 / 2 (FIR) / 3 / 5 / 6 Settings sets the I/O (Input/Output) address and the Interrupt ReQuest line (IRQ) settings of the COM ports. The options are Disabled ; COM1, 3F8, IRQ4 ; COM2, 2F8, IRQ3 ...

Setup Configuration Utility (SCU) 5-9 Security Menu Power-on Password

5-10 Setup Configuration Utility (SCU) Allows you to set the password for your system. When typing the password, first make sure that Num Lock is off, then type your password in the entry fields and press Enter . Confirm your password by typing it again and pressing Enter . If the Enable Password to...

Setup Configuration Utility (SCU) 5-11 Boot Menu Boot Sequence Sets the first, second, third, and fourth booting device. The system will try to boot from the first device but if it is not available, will try the next boot device. If you set the first boot device to LAN Boot , the system will boot fr...

5-12 Setup Configuration Utility (SCU) Exit Menu Save Changes and Exit Saves the changes you have made and exit the SCU program. Discard Changes and Exit Exits the SCU program without saving the changes you have made. Get Default Values Loads factory default values for all the items. Load Previous V...

CHAPTER 6 Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If no...

6-2 Installing Software Drivers How to Use the Driver CD NOTES: • The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. • You can always find README or document files on the driver CD. These files contain the latest information from the so...

Installing Software Drivers 6-3 Drivers on the First Page To install the necessary driver, just click on the particular option and follow the onscreen instructions to continue and complete installation. Device Driver Installs the device drivers (chipset, VGA, LAN, audio, modem, etc.). Video Capture ...

6-4 Installing Software Drivers Upon clicking “Next Page,” the following screen appears: Drivers on the Second Page IrDA Connects an IrDA-compliant device for wireless data transfer PROSet Installs the WLAN Utility that allows your system to connect wirelessly to the Internet. SpeedStep Allows you t...

Installing Software Drivers 6-5 Drivers on the Three Page TouchScreen Click on the TouchScreen button to install touch screen driver. GPS Click on the GPS button to on installing the GPS DRIVER..

6-6 Installing Software Drivers Install Touch Screen Driver for Windows 2000, Windows XP 1. After the system has finished rebooting, click on the “PenMount Monitor icon located on the taskbar to bring up the “PenMount Control Panel.” 2. Select the “ Standard Calibration” folder and click on “OK” but...

Installing Software Drivers 6-7 NOTE 1. If you play game with CRT or DVI monitor, please select “Twin” to display the screen.

CHAPTER 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer...

7-2 Caring for the Computer Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use. If...

Caring for the Computer 7-3 Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 0 ° C (32 ° F) and 50 ° C (122 ° F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy ...

7-4 Caring for the Computer Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display. Du...

Caring for the Computer 7-5 When Traveling Before traveling with your computer, make a backup of your hard disk data into optical discs or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure the battery pack is fully charged. Make sure the compu...

CHAPTER 8 Troubleshooting Hardware, software, or a combination of both can cause computer problems. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. It is divided into three sec...

8-2 Troubleshooting Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer. If an externa...

Troubleshooting 8-3 Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 Bluetooth Problems P. 8-4 DVD Drive Problems P. 8-4 Display Problems P. 8-5 Fingerprint Recognition Problems P. 8-7 Hardware Device Problems P. 8...

8-4 Troubleshooting Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the ...

Troubleshooting 8-5 I cannot end a Bluetooth connection. If another device is connected to your computer, you can either end the connection using the other device or by deactivating Bluetooth. DVD Drive Problems The DVD drive cannot read a disc. Make sure that the disc is correctly seated in the tra...

8-6 Troubleshooting Display Problems Nothing appears on the screen. If the power-on indicator is not on, check the electrical outlet, the plugs and power cords. If the power button does not respond to a light touch, press the button firmly. If you are using battery power, make sure that it has a cha...

Troubleshooting 8-7 Make sure that the monitor’s signal cable is properly connected. Switch the display to the monitor by pressing Fn + F9, or change the display through the settings in Display Properties. Simultaneous display/multi-display does not work. Make sure that you turn on the external moni...

Troubleshooting 8-9 Make sure that the IR ports are clean. Keyboard, Mouse and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. The numeric keypad is disabled. Make sure tha...

8-10 Troubleshooting WLAN Problems I cannot use the WLAN feature. Make sure that the Mini PCI WLAN card is correctly installed. Make sure that the necessary driver(s) is correctly installed. Make sure that the WLAN feature is turned on. Transmission quality is poor. Your computer may be in an out-of...

Troubleshooting 8-11 If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with. Make sure...

8-12 Troubleshooting Power Management Problems The computer does not enter Standby or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use. Make sure that the Standby or Hibernation ...

Troubleshooting 8-13 Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the audio driver is correctly installed. Make sure that the computer is not in Standby mode. If using an external speaker, make sure that the speaker is properly connected. ...

8-14 Troubleshooting If you are using the battery power, make sure that the battery is not discharged. When you turn on the computer, it stops after POST. Restart your computer. Other Problems The date/time is incorrect. Correct the date and time via the operating system or SCU program. After you ha...

Troubleshooting 8-15 Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data. Periodically check the hard...

APPENDIX A Specifications NOTE: Specifications are subject to change without any prior notices. Parts Specifications CPU Intel Mobile Pentium Dothan Processor-M series, µ -FCPGA package, 1.8 GHz; Front Side Bus (FSB) 400 MHz, 21 W thermal ceiling Cache Memory L2 2 MB on-die ROM BIOS 512 KB Flash EEP...

B-2 Fingerprint Recognition System Finger Placement When placing a finger to be enrolled or identified, slide the cover to expose the sensor matrix surface, then use a light, but firm and steady pressure. Avoid moving your finger during the scan, and be sure that you are making contact with the “sen...

Fingerprint Recognition System B-3 Using the Fingerprint Recognition System Utility NOTE: To take advantage of the fingerprint recognition system, the driver and utility supplied with your computer must be installed (see chapter 6 for details). Double-click on the icon located on your Windows’ syste...