Page 2 - Table of Contents
2 Table of Contents Editorial Record 4 Preface 5 Chapter 1 Overview 6 1.1 Features 6 1.2 Available Models and Options 7 1.2.1 Options and Interfaces 9 1.3 General Guide 10 1.3.1 HA-A34AT Car Mounted Battery Charger 12 1.3.2 HA-A61IO, HA-60IO Cradles 13 1.3.3 DT-5022CHG Dual Battery Charger 15 1.3.4 ...
Page 4 - Editorial Record
4 Editorial Record Manual Version no. Date edited Page Content 0.90 March 2004 Tentative version 1.00 August 2004 Original version 1.01 September 2004 36 The content in Table 4.11 of Chapter 4 has been updated. 1.02 February 2005 all The description about C-MOS imager has been added. 7 The content i...
Page 5 - Preface
5 Preface A new industrial handheld terminal has been developed. CASIO introduces the DT-X5 series of handheld terminal with built-in SH-3 (32-bit RISC type) Processor, high speed laser scanner and diverse wireless LAN communications via Bluetooth as standard and IEEE802.11b WLAN (model dependent). ...
Page 6 - Incorporates .NET technology; Makes effective use of .NET resources developed by other parties.; Enhanced communicating functions
6 1. Overview 1.1 Features Incorporates .NET technology • Uses WindowsCE .NET 4.1 operating system. • Makes effective use of .NET resources developed by other parties. • Employment of Embedded OS makes it possible to build a flexible WindowsCE system. Enhanced communicating functions • Built in Blue...
Page 7 - Available Models and Options
7 1.2 Available Models and Options Table 1.1 Models of DT-X5 series Wireless LAN Scan Engine Model IEEE802.11b Bluetooth Laser C-MOS Operating battery DT-X5M10E No Yes Yes No Lithium-ion/ Alkaline DT-X5M10R ETSI Yes Yes No Lithium-ion DT-X5M30E No Yes No Yes Lithium-ion/ Alkaline DT-X5M30R ETSI Yes ...
Page 12 - View; Power Indicator Lamp
12 1.3.1 HA-A34AT Battery Charger Car Mount Unit View Note: The view in Fig. 1.5 shows HA-A34AT (Battery Charger Car Mount Unit) with HA-A30CHG (Cradle-type Battery Charger) integrated to it. Fig. 1.5 Power Indicator Lamp Power Contacts Power Switch Car power code jack Remove button HA-A30CHG HA-A34...
Page 15 - Views
15 1.3.3 DT-5022CHG Dual Battery Charger Fig. 1.7 Top Left Right Bottom Views Charge status indicators Dual charger connection terminals AC adaptor jack Connection attachments Battery pack compartments
Page 16 - Top
16 1.3.4 HA-A20BAT and DT-5025LBAT Battery Packs Views Fig. 1.8 HA-A20BAT DT-5025LBAT Bottom Bottom Side Side Left Left Top Top Charge/Power supply terminals Charge/Power supply terminals
Page 17 - Hardware Specifications; Item Specification Remark
17 2. Hardware Specifications 2.1 DT-X5 Table 2.1 Item Specification Remark CPU, Memory CPU SH3 (32-bit RISC type) Operating system Microsoft® Windows® CE .NET Ver. 4.1 RAM 16 MB (user area: approx. 7.5 MB) FROM (OS) 32 MB FROM (Storage) 32 MB (user area: approx. 30 MB) Laser scanner Method Semi-con...
Page 22 - Reference for Laser Scanner Performance; Ambient light immunity; Basic scanning conditions:
22 2.1.1 Reference for Laser Scanner Performance Reference of the laser scanner performances below for the DT-X5M10E/DT-X5M10R is provided as a guide to be utilized by the user. The user can refer to these reference values in the table for his or her specific business application. All the reference ...
Page 23 - Resolution
23 44 44 44 44 44 44 0.25 0.33 0.5 1.0 0 to 400 0 to50 0 to 60 0 to 150 0 to 200 0 to 300 ( Unit: mm ) Resolution 355 280 205 168 100 93 60 Fig. 2.1
Page 25 - Near
25 Basic scanning conditions: Test chart : Dedicated test pattern (1D, 2D Stacked) Resolution : 1D 0.25 mm / 2D 0.5 mm PCS : 0.9 or greater Read judgment : 7 times per 10 scans First Decode Depth : 110 mm from the LED emission port Pitch angle : α = 0 degree Skew angle : β = 10 degree Tilt angle : γ...
Page 26 - S E S R C
26 2.2 HA-A60IO, HA-A61IO Table. 2.7 Item Specification Remark Standard IrDA Ver. 1.1 compatible Comm. method Half duplex Synchronization Start/stop method IrDA Comm. speed 4 Mbps (maximum) Standard USB Ver. 1.1 compatible Comm. speed 12 Mbps (maximum) USB Connector USB connector type B 1. VBus 2. –...
Page 31 - Status Indications with LEDs; LED modes and their meanings.
31 2.6 Status Indications with LEDs Various operational statuses on the HA-A61IO can be displayed using the LEDs. The following table describes LED modes and their meanings. Table 2.13 Item Specification Remark LED Power off. Off Power is on and the terminal is mounted correctly. Green Power status ...
Page 32 - Power Supply Block
32 2.7 DT-5022CHG Basic Block Table 2.14 Item Specification Remark Basic function Rechargeable battery pack HA-A20BAT Battery pack (1,700 mAH) DT-5025LBAT Large-capacity size battery pack (3,400 mAH) Dedicated batteries only. AC adaptor AD-S45150AU Input; 100 to 230VAC With US power cord AD-S45150AE...
Page 33 - Battery Charge Block
33 Battery Charge Block Table 2.17 Item Specification Remark Charge control Output voltage DC4.22V±30mV Charge current (standard mode) DC1,600mA±10% Charge current (standby mode) DC160±40mA Full charge detection current DC120±30mA Full charge detection voltage 4.1V Voltage control Re-charge detectio...
Page 35 - Product Identification and Reference Numbers
35 3. Product Identification and Reference Numbers On the back of the terminal and its options (major options only), there is a bar code and numbers printed on label as shown in Fig. 3.1 below. This bar code is represented by 15 digits of Code128 and by alphanumeric characters beneath the bar code. ...
Page 39 - Electrical Performances
39 4.2 Electrical Performances 4.2.1 DT-X5 Table 4.6 Item Specification Remark DC1.1A/3.0V to 5V For DT-X5M10E DC1.3A/3.0V to 5V For DT-X5M30E/DT-X5M30U DC1.4A/3.7V to 5V For DT-X5M10R Power consumption DC1.6A/3.7V to 5V For DT-X5M30R Anti-static strength Malfunction ± 4 KV (contact), ± 8 KV (in air...
Page 41 - Mechanical Performances
41 4.3 Mechanical Performances 4.3.1 DT-X5 Table 4.11 Item Specification Condition Resistance to drop impact (height) In bare condition 180 cm Onto concrete, one time on each of the 6 sides and 4 corners. In individual carton box 70 cm or less In master carton box 70 cm or less Onto concrete, one ti...
Page 45 - Length 1 meter or less; Wiring
45 5. Cable Specifications 5.1 For Chain Connection and Short Length Length; 1 meter or less 1 2 3 4 5 6 M a x m i m u m 1 m M o d u l a r p l u g ( c o m p p a t i b l e w i t h 6 / 6 - 6 F R S Y K ( S a b y o I n d u s t r i a l ) 1 2 3 4 5 6 C a b l e ( s e e T a b l e 5 . 1 ) Table 5.1 Specifica...
Page 46 - For Chain Connection and Long Length; Length 1 meter or longer; XXXXXX
46 5.2 For Chain Connection and Long Length Length; 1 meter or longer 1 2 3 4 5 6 Max. 1,000m Modular plug compatible with 6/6-6 FR SYK50 by Sanyo Industrial Co. 1 2 3 4 5 6 Cable compatible with SK-UTP 100M3P by Sanyo Industrial Co. Pin layout diagram of cable for chain connection and long distance...
Page 47 - Handling Precautions; will be 65%, and that after 20 days at 60
47 6. Precautions 6.1 Handling Precautions Precautions for short-term storage (1 to 2 days) • If the DT-X5 is to be stored over holidays (including Saturday and Sunday), replace the battery pack (or AA-size alkaline batteries) with brand-new one before starting the holiday. This will conserve the bu...
Page 49 - About the power cable and AC adaptor
49 6.2.2 General • Be aware of abnormal conditions. If the DT-X5 is continuously used in an abnormal condition, a fire or electric shock may occur. If there is an abnormality, immediately turn off the Power switch, and be sure to remove the batteries and then contact a CASIO distributor for repair. ...
