Page 2 - To reset the Pocket PC
2 • Microsoft, ActiveSync, Outlook, Pocket Outlook, Windows, Windows NT and theWindows logo are either registered trademarks or trademarks of Microsoft Corporation inthe United States and/or other countries. • Pentium is a registered trademark of Intel Corporation. • CompactFlash is a registered tra...
Page 3 - Safety Precautions; Note; Markings and Symbols
3 Safety Precautions Congratulations upon your selection of the CASSIOPEIA. Be sure to read the followingSafety Precautions before trying to use it for the first time. Note All mentions of “the unit” in the following precautions refer to the CASSIOPEIA. Markings and Symbols The following are the mea...
Page 5 - F or greater. Doing so; Warning
5 Rechargeable Battery Pack Danger • Never try to take apart the battery pack or modify it in any way. The batterypack has built-in safety and protection mechanisms that ensure safeoperation. Damaging these mechanisms creates the danger of fire, smokeemission, and explosion. • Never allow the positi...
Page 6 - Caution; When loading batteries, make sure their positive (; AC Adapter
6 Caution Misuse of batteries can cause them to leak, which damages and corrodes thearea around the battery and creates the danger of fire and personal injury. Besure to observe the following precautions. • When loading batteries, make sure their positive ( + ) and negative (–) poles are facing corr...
Page 8 - Operating Precautions
8 Operating Precautions The CASSIOPEIA is a precision digital instrument. Incorrect operation and roughhandling can cause data storage problems and other malfunction. Be sure to read thefollowing precautions to ensure proper operation. • Charge the battery pack as soon as possible when they start to...
Page 9 - Take care to avoid spilling water or drinks on the CASSIOPEIA.
9 • Never try to take the CASSIOPEIA apart. Doing so can cause malfunction. • Never insert foreign objects into connectors, slots, or other openings. • Take care to avoid spilling water or drinks on the CASSIOPEIA. • Use only the stylus that comes with the CASSIOPEIA to press the RESET button. • Nev...
Page 10 - Important; Never expose the CASSIOPEIA to large amounts of water.
10 Important • The TFT color LCD is a product of the latest color LCD manufacturing technology.However, virtually all TFT color LCDs have a very small number of pixels (about0.01% of the total number of pixels) that do not turn on or always remain turned on.This is normal and does not indicate malfu...
Page 11 - Contents
11 Contents Safety Precautions ............................................................................................ 3 Markings and Symbols ........................................................................................... 3 Health Precautions ...........................................
Page 12 - Terms and Symbols used in this manual; The term “unit” in this manual refers to the CASSIOPEIA.; ” indicates important information about a procedure
12 Terms and Symbols used in this manual • The term “unit” in this manual refers to the CASSIOPEIA. • The symbol “ Important ” indicates important information about a procedure that can result in problems if not performed correctly. Be sure to read suchinformation carefully. Resetting the Unit ........
Page 13 - Getting Ready; Initial Setup; Hardware Manual
13 Getting Ready Initial Setup • Before using the CASSIOPEIA for the first time after purchasing it, be sure toperform the set up procedure in accordance with the Quick Start Guide . Where to go for information... Your CASSIOPEIA comes with two manuals: this printed Hardware Manual , and a separate ...
Page 14 - Software Applications
14 Software Applications Software applications are available for purchase from Microsoft and third parties whosupport Windows CE. For details on commercially available software applications,contact your local retailer or visit the Microsoft Web site at http://www.microsoft.com . Important • Whenever...
Page 15 - Operations; General Guide
15 AC adapter terminal Touch screen Perform operations and inputdata by tapping and writingdirectly on the screen. Stylus • Menu (Launcher) • Contacts• Calendar Speaker Power button Turns power onand off. Action control See “About the[Action] Control”on the next page. Record button(Program button) V...
Page 17 - Attaching the Strap; Attach the card slot cover to the CASSIOPEIA.; Use only the strap that comes with your CASSIOPEIA.
17 Attaching the Strap Attach the strap to the CASSIOPEIA as shown in the illustration below. 1. Attach the card slot cover to the CASSIOPEIA. 2. Pass the strap loop through the strap hole and then pass the other end of the strap through the loop as shown below. Important • Use only the strap that c...
Page 18 - Using the Touch Screen Sheet; Make sure the touch screen is free of dust and dirt.
18 Using the Touch Screen Sheet The touch screen sheet that comes with the unit protects the touch screen againstscratching and other damage. Use the following procedure to affix the sheet to thetouch screen. Important • When setting the touch screen sheet in place, take care not to press down on th...
Page 19 - Closing the Jack Cover; Jack cover open
19 Drip-proofing Your CASSIOPEIA is drip-proof, which means it is able to withstand exposure tomoderate amounts of rain, snow, and other moisture. Note, however, that drip-proofingis ensured only when the CASSIOPEIA’s rechargeable battery pack and the threecovers (jack cover, card slot cover, serial...
Page 20 - Proper and complete sealing; Installing the Card Slot Cover; Card cover open
20 Example of incomplete closingThe middle of the cover is still raised, which canallow moisture to get inside. Proper and complete sealing Installing the Card Slot Cover The following shows things you must do and things you need to avoid when installingthe card slot cover. Card cover open Place the...
Page 21 - Closing the Serial Connector Cover; Serial connector cover open
21 Finally press the center of the cover and check tomake sure that it closes completely. Example of incomplete closingA large gap is present in the center of the coverbecause it was not pressed into the slot properly.This can allow moisture to get inside. Proper and complete sealing Closing the Ser...
Page 23 - Using the Stylus; and images. Drag in a list to select multiple items.; Take care to avoid breaking the tip of the stylus.; Recalibrating the Touch Screen; Settings; follow the instructions that appear on the screen.
23 Using the Stylus Data input and virtually all other operations are performed using a stylus, which ishoused inside the stylus holder in the higher right corner of the CASSIOPEIA. The following defines the various operations that you can perform with the stylus. Tap ...................... Touch th...
Page 24 - Battery Power; See “Main Battery and Backup Battery” on page 25
24 Adjusting Display Contrast Perform the following operations to adjust display contrast and make figures on thedisplay darker or lighter. • Tap and then Settings . On the System tab, tap Brightness . Follow the instructions on your screen for adjusting the contrast. • You can also adjust contrast ...
Page 25 - External AC Power; Connecting the AC adapter (; Main Battery and Backup Battery; Pocket PC User’s Guide
25 External AC Power Connecting the AC adapter ( page 34 ) or AC adapter/charger ( page 35 ) to the AC adapter jack on the left side of the CASSIOPEIA unit provides power in place of themain battery. AC power is also supplied through the power terminals on the bottom ofthe CASSIOPEIA whenever it is ...
Page 26 - “Warning
26 • Data stored in memory can be lost if you continue operation after the low battery messageappears or if you incorrectly load batteries. Be sure to always back up important data onyour desktop computer hard disk or on a CompactFlash Card. See ActiveSync Help for information about backing up files...
Page 27 - Replacing the Battery Pack (Main Battery); Make sure the CASSIOPEIA is turned off.; Charging the Battery Pack on the CASSIOPEIA; Attach the rechargeable battery pack to your CASSIOPEIA.
27 Replacing the Battery Pack (Main Battery) 1. Make sure the CASSIOPEIA is turned off. • If power is on, press the [Power] button to turn it off. 2. Turn the CASSIOPEIA over. 3. Use a coin or screwdriver to rotate the battery lock counterclockwise. Next, remove the battery pack. 4. Insert the botto...
Page 28 - Using a CompactFlash Card; Make sure your CASSIOPEIA is turned off.
28 • The time required to attain a full charge is greatly affected by ambient temperatureand the type of operations you perform on the CASSIOPEIA while charging is takingplace. • You can normally operate the CASSIOPEIA while charging is taking place.However, you will not be able to perform any opera...
Page 29 - Slide the card release to the Free position.; Infrared Communications
29 EJECT button Bottom Top 3. Slide the card release to the Free position. 4. If there is already a card in the slot, use the stylus to press the EJECT button straight down, and remove the card. 5. Slide the card you want to use into the card slot. • Make sure the top of the card is facing towards t...
Page 30 - Resetting the Unit; Performing a Reset; Use the stylus to press the RESET button.
30 Important • Take care so either of the units does not move while infrared data communicationsare in progress. • Infrared data communications may be impossible under strong sunlight or invertertype fluorescent lighting. • Infrared data communication problems can be caused by the distance between t...
Page 31 - Memory Error Message; What to do if the startup screen does not appear when you press the
31 • The unit performs a reset followed by a memory check operation.If no data error is found, the following two screens appear on the display in succession. • Startup screen • Desktop 2. Normal unit operation is possible after the desktop appears. • Memory data and settings are retained when you re...
Page 32 - Performing a Full Reset
32 Important Do not use the ActiveSync backup function to back up data to a computer when yoususpect a data error. Doing so may also include the corrupted data that is causing yourproblem, which means the problem will reappear when you restore the data. Full Reset (Memory Initialize) Full reset (mem...
Page 33 - Errors Following a Full Reset
33 4. Press the [Action] control again. • This starts the full reset operation, which deletes all data in memory. • Pressing the [Action] control displays the Startup screen. The remainder of thisprocedure identical to the Initial Setup described in the Quick Start Guide. Performthe steps of the Ini...
Page 34 - See “Charging the Battery Pack on the CASSIOPEIA” on page 27
34 Using Peripherals This section explains use of the various peripherals that are available for use with theCASSIOPEIA. Using the AC Adapter You can use the AC adapter to directly power the CASSIOPEIA or to supply powerthrough the cradle. The battery pack charges while the CASSIOPEIA is directlycon...
Page 35 - To charge a battery pack mounted on the AC adapter/charger
35 Using the AC Adapter/Charger (CH-C59200U) As its name suggests, the AC Adapter/Charger functions as both a charger for thebattery pack and as an AC adapter. ■ To charge a battery pack mounted on the AC adapter/charger 1. Plug the AC adapter/charger into a wall outlet as shown in the illustration....
Page 36 - arrow and remove the battery pack from the AC adapter/charger.
36 3. After charging is complete, slide the EJECT switch in the direction indicated by the arrow and remove the battery pack from the AC adapter/charger. Important • Unplug the AC power cord from the wall outlet when you are not using the ACadapter/charger. • If the indicator goes out during chargin...
Page 37 - Using the Cradle; Connecting the Cradle to a Computer; See “Required System Configuration” on page 48; To connect using a USB cable; Slide the cradle’s serial/USB port cover so the USB port is open.
37 Using the Cradle The cradle provides quick and easy connection between your CASSIOPEIA and apersonal computer. Data passes between the CASSIOPEIA and cradle over a non-contact infrared link. CASSIOPEIA can also be powered from an AC power sourcewhen it is placed on the cradle. Connecting the Crad...
Page 39 - Use the following procedure to place the unit onto the cradle.; To remove the CASSIOPEIA from the cradle; Slide the CASSIOPEIA straight up from the cradle.
39 Use the following procedure to place the unit onto the cradle. 1. Place the cradle on a desk or other flat, level surface. 2. Turn off the CASSIOPEIA. 3. Place the CASSIOPEIA onto the cradle as shown in the illustration. 4. Orient the CASSIOPEIA in relation to the cradle as shown in the illustrat...
Page 40 - Using the CASSIOPEIA USB Cable
40 Using the Serial Cable (20-pin) You can use the serial cable to connect the CASSIOPEIA directly to your computer. Important • See “Required System Configuration” on page 48 for the computer system that is required for direct serial connection. • Be sure to turn off the CASSIOPEIA and your compute...
Page 41 - To connect to a computer using the CASSIOPEIA USB cable; Plug the USB cable into the USB port of your computer.
41 To connect to a computer using the CASSIOPEIA USB cable 1. Plug the USB cable into the USB port of your computer. 2. Turn off your CASSIOPEIA. 3. Connect the other end of the USB cable to your CASSIOPEIA. USB port CASSIOPEIA USB cable
Page 42 - Digital Phone Connection Cable; See the
42 Digital Phone Connection Cable • U.S. and Canada: Use a cdma digital phone connection cable (JK-541CA). • For a GSM type digital phone, use a commercially available cable that is compatiblewith the CASSIOPEIA connector. • After you connect the CASSIOPEIA to your digital telephone, you can dial up...
Page 44 - Troubleshooting
44 Page 27 3032 Possible Cause Main battery is weak. Internal malfunction Recommended Action Charge the battery pack. Reset the unit.If resetting the unit does not correct theproblem, perform a full reset (memoryinitialize). Nothing happens when the [Power] button is pressed. Page 27 37 Possible Cau...
Page 46 - Appendix; Button Operations; Unit Power Off; calibration procedure.
46 Appendix Button Operations The following shows the function of each button under various conditions. Unit Power Off [Power] Button ........................... Turns on power.[Record] Button .......................... Turns on power, launches Notes application, starts recording. [Calendar] Button ...
Page 47 - Specifications
47 Specifications Model: EG-800 Display: 240 × 320 dots TFT Color LCD (65,536 colors) CPU: VR4122 Memory: 32MB Interfaces: Serial: RS-232C, 115.2 kbps max.Infrared: IrDA Ver. 1.1 Range: 30 cm max. USB (Client) Card Slot: CompactFlash card, 3.3V Type I / Type IIHeadphone jack: ø 3.5 mm stereo output ...
Page 48 - Required System Configuration; ActiveSync
48 Required System Configuration The minimum system configuration required for running ActiveSync ® 3.1 is described below. ActiveSync ® 3.1 System Requirements • Microsoft ® Windows ® 2000, Windows NT ® Workstation 4.0 with Service Pack 3 or greater , Microsoft ® Windows ® Me or Windows 95/98. (U.S...
Page 49 - Requirements for Mobile Channels or Mobile Favorites Support; Microsoft; Requirements for Microsoft
49 Requirements for Mobile Channels or Mobile Favorites Support Microsoft ® Internet Explorer 4.0 or higher. Internet Explorer 5.0 is included on the CD, which requires 56-98MB of hard disk space. Requirements for Microsoft ® Outlook ® 2000 Microsoft Outlook 2000 requires 153 MB of disk space for a ...
Page 50 - Re-attaching the Jack Cover and Serial Connector Cover; Re-attaching the Jack Cover; Jack cover removed
50 Re-attaching the Jack Cover and Serial Connector Cover The following procedures describe how to re-attach the jack and serial connector coversto the CASSIOPEIA after they have been removed. Re-attaching the Jack Cover The following shows things you must do and things you need to avoid when re-att...
Page 51 - Re-attaching the Serial Connector Cover; Serial connector cover removed
51 Press down on one side of the jack cover and thenslide your finger to the other side so it completelycloses. Check to make sure that the entire jack cover iscompletely and correctly pressed into the case. Re-attaching the Serial Connector Cover The following shows things you must do and things yo...
Page 52 - Press down on the cover with both thumbs.
52 1 Press down on the cover with both thumbs. 2 Double check to make sure there are no gapsor unevenness between the cover and case. 3 If you discover a gap or unevenness, pressdown on the cover until it is eliminated. Check again to make sure that the serial connectorcover is laying flat without a...
Page 53 - Regulatory Information; Tested To Comply With FCC Standards
53 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (notapplicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protect...
