Carrier start-up and- User Manual
Carrier start-up and– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Fig. 2—Infinity ControlTM
- Page 4 – EQUIPMENT WIRING DIAGRAMS:; For other applications not listed, refer to the Network; Fig. 9—Decorative Backplate Assembly; User Interface; Fig. 12—Universal Four-Wire Connection Diagram
- Page 5 – Fig. 13—Connection Diagram for; Fan Coil; Fig. 14—Connection Diagram for
- Page 6 – Fig. 17—Selecting Electric Heater; INSTALLED FILTER; MEDIA; High voltage EAC; EAC; High voltage EAC + 1 to 4 inch media; Table 1 — Filter Selection; Fig. 19—Equipment Summary
- Page 7 – Fig. 21 — EQUIPMENT SUMMARY
- Page 8 – SETUP MENU; SETUP
- Page 9 – SETUP = SYSTEM MAINTENANCE
- Page 10 – Fig. 24 — CHECKOUT MENUS; CHECKOUT; Fig. 25 — SERVICE INFO MENUS; SERVICE INFO
- Page 11 – OPERATIONAL INFORMATION
- Page 12 – TROUBLESHOOTING; Fig. 26 — Critical Alert Screen; Fig. 27 — System Malfunction Screen
SYSTXCCUID01
Infinity Control™
Installation and Start-Up Instructions
NOTE:
Read the entire instruction manual before starting the
installation.
This symbol
→
indicates a change since the last issue.
TABLE OF CONTENTS
SAFETY CONSIDERATIONS .....................................................1
INTRODUCTION ..........................................................................1
INSTALLATION AND START-UP OVERVIEW ......................1
INSTALLATION ...........................................................................2
INITIAL POWER-UP ....................................................................5
QUICK START..............................................................................6
INSTALL / SERVICE MENUS ....................................................7
OPERATIONAL INFORMATION .............................................11
TROUBLESHOOTING ...............................................................12
SAFETY CONSIDERATIONS
Read and follow manufacturer instructions carefully. Follow all
local electrical codes during installation. All wiring must conform
to local and national electrical codes. Improper wiring or installa-
tion may damage Infinity Control System. Recognize safety
information. This is the safety-alert symbol
. When you see this
symbol on the equipment and in the instruction manual, be alert to
the potential for personal injury. Understand the signal words
DANGER, WARNING, and CAUTION.
These words are used with the safety-alert symbol. DANGER
identifies the most serious hazards, which will result in severe
personal injury or death. WARNING signifies a hazard, which
could result in personal injury or death. CAUTION is used to
identify unsafe practices, which would result in minor personal
injury or product and property damage. NOTE is used to highlight
suggestions which will result in enhanced installation, reliability,
or operation.
INTRODUCTION
The Infinity System consists of intelligent communicating com-
ponents (User Interface, variable speed furnace or fan coil, AC or
HP), which continually communicate with each other via a
four-wire connection called the ABCD bus. Conventional 24-volt
signals on dedicated wires are not needed. Commands, operating
conditions, and other data are passed continually between the
components over the ABCD bus. The result is a new level of
comfort, versatility, and simplicity.
An Infinity System consists of a Infinity Control™ (thermostat
plus much more) and an Infinity furnace or fan coil. All Infinity
furnaces or fan coils are variable-speed and multi stage for
maximum flexibility, efficiency, and comfort. They support con-
trolled ventilation, humidification, dehumidification, and air qual-
ity control. Either an Infinity dual capacity (communicating), or a
standard 24 vac controlled outdoor unit may be used.
When using conventional outdoor units, the Infinity furnace or fan
coil provides the 24 volt signals needed to control them. Also, the
Infinity Network Interface Module (NIM) allows connection of a
conventional HRV or ERV without the need for a separate wall
control.
All system components are controlled through the wall mounted
Infinity Control™, which replaces the conventional thermostat and
provides the homeowner with a single wall control for all the
features of the system.
INSTALLATION AND START-UP OVERVIEW
This instruction covers installation of the Infinity Control™ only.
Physical installation instructions for the indoor, outdoor equipment
and accessories are provided with each unit.
Setup, commissioning, operation, and troubleshooting of the
Infinity System is covered only in this installation instruction. It is
your guide to connecting the system components and commission-
ing the system once all the physical components are installed.
Special screen prompts and start-up capabilities are provided in the
Infinity System to simplify and lead you through the initial
commissioning of the system. So:
•
Install the Infinity Control™ according to this instruction.
•
Install the indoor unit, outdoor unit, and accessories according
to their instructions.
•
Wire the complete system according to this instruction.
•
Setup, commission, and operate the system according to this
instruction to assure yourself a smooth and trouble free
start-up.
HOLD
COOL
HEAT
OFF
Infinity Control™
SYSTXCCUID01
A03149
Visit www.carrier.com
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1
4
Tab
misc. misc.
PC 101
Catalog No. 809-50020
Printed in U.S.A.
Form UID01-1SI
Pg 1
01-04
Replaces: NEW
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION STEP 1 — CHECK EQUIPMENT AND JOB SITE INSPECT EQUIPMENT — File claim with shipping company,prior to installation, if shipment is damaged or incomplete. STEP 2 — INFINITY CONTROL™ LOCATION AND WIRINGCONSIDERATIONS ELECTRICAL SHOCK HAZARDFailure to follow this warning could result in pers...
ELECTRICAL OPERATION HAZARDFailure to follow this caution will result in equipment damageor improper operation.Improper wiring of the ABCD connector will cause theInfinity Control™ to operate improperly. Check to make sureall wiring is correct before proceeding with installation orturning on power. ...
FIRE OR EQUIPMENT HAZARDFailure to follow this warning could result in equipmentdamage or fire.Do not apply 24vac fan powered humidifier (with internalpower supply) direct to indoor unit HUM and COM termi-nals. INITIAL POWER-UP NOTE: Refer to Functional Overview (Fig. 11) to become familiar with key...
