Page 3 - TABLE OF CONTENTS
TABLE OF CONTENTS PAGE INTRODUCTION 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HOME SCREEN 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information Displayed 1 . . . . . . . . . . . . . . . ...
Page 7 - INTRODUCTION; CONGRATULATIONS! Your decision to choose the Infinity; HOME SCREEN; Information Displayed; you touch the display. You will then be taken to the Home Screen.
1 INTRODUCTION CONGRATULATIONS! Your decision to choose the Infinity R Touch Control puts you in a select group of homeowners who understand the value of precise comfort control and appreciate the simplicity of an easy --to --use, intuitive, control.Your new Infinity Touch Control offers high qualit...
Page 9 - NOTE; : If the Infinity Touch control is connected to the home Wi--Fi
3 A13260 S NOTE : If the Infinity Touch control is connected to the home Wi--Fi network but loses connection to the MyInfinity Server, the signal strength bar will be displayed in red as depicted in the image below.Connection strength to the home Wi--Fi network will continue to bedisplayed by the nu...
Page 10 - Information Buttons
4 S Pressing on the Connectivity Status bars from the Home Screen willallow you to view the Remote Access Status screen. A13262 Information Buttons On the bottom of some screens will be an information icon. By pressing theinformation icon, a text box will display to show what interactions are availa...
Page 11 - MAIN SCREEN; System Mode; DAY
5 MAIN SCREEN The main screen is where most interactions will take place. Touch anywhere on thescreen to arrive at the main screen. System Mode S Once in the main screen, S To access your system mode touch the MODE label located in the upper right of the control. S The drop --down menu will allow yo...
Page 12 - Adjusting Heating
6 S Use the Up ( Y ) and Down ( B ) buttons to make the appropriate changes. S When you have completed all of the settings, touch SAVE . S If you make a mistake you may touch CANCEL and begin again. Adjust Temperature (Temporary Hold) The Infinity Touch Control allows you to temporarily override you...
Page 13 - Adjusting Cooling
7 S When the correct time interval is displayed, touch DONE . S To return to the scheduled program, touch HOLD UNTIL , and then select PER SCHEDULE . Adjusting Cooling S To adjust the cooling temperature, enter the main screen by touchinganywhere on the control. S With the system in either AUTO or C...
Page 16 - FEATURES; Adjust Fan Speed; MENU SCREEN
10 FEATURES Adjust Fan Speed The Features function of Infinity Touch Control allows you to adjust the fan speed during continuous fan operation. S To adjust the fan speed, enter the main screen by touching anywhere onthe control. S Touch FEATURES on the top left of the screen. S A drop down menu wil...
Page 17 - COMFORT PROFILES
11 COMFORT PROFILES You will need to set the comfort profiles before you attempt to program your new Infinity Touch Control. S The COMFORT PROFILES button includes settings for Temperature and Fan Profiles, Humidity and Fresh Air Profiles, as well as Window Protection Setup. A14240 S Set your desire...
Page 18 - Home Comfort Profile Humidity Control
12 d Use the Up ( Y ) and Down ( B ) buttons to change the fan settings, heating and cooling temperatures. When you are done, press the DONE button on the bottom right. d Do the same thing to change the WAKE and SLEEP profiles. d The AWAY profile provides an extra feature called Smart Setback . It a...
Page 19 - If you have a humidifier installed for your system, touch; HEATING; to set the desired humidity level within the home.; SAVE; to discard any changes.; COOLING HUMIDITY
13 A14243 S If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level within the home. d You will have the option to turn ON or OFF your humidifier fromthis screen. A14244 d Once your Humidifier is turned ON, use the Up ( Y ) and Down ( B ) buttons ...
Page 20 - Touch; YES; or; Home Comfort Profile Fresh Air Control; Heating Fresh Air
14 A14245 d Use the Up ( Y ) and Down ( B ) buttons to set the desired dehumidi- fication level between 46 --58%. d Touch YES or NO for the system to over --cool the conditioned space by up to 3º F to remove as much humidity out of the air aspossible. d Press SAVE when finished, or CANCEL to discard...
Page 21 - Away Comfort Profile Humidity Control
15 S You will have the option of choosing among AUTO , MANUAL , or OFF . d The AUTO setting will allow the user to choose the maximum fresh air that the ventilator will provide. Selections are Low, Medium or High . d The MANUAL setting allows you to select the percentage of fresh air to supply your ...
Page 23 - Away Comfort Profile Fresh Air Control
17 Away Comfort Profile Fresh Air Control You may wish to have different Fresh Air profiles for when you’re away. Press the menu area on the Main Screen to access the additional menu selections. Select Comfort Profiles , then select Humidity and Fresh Air Profiles option. S Touch AWAY to set your fr...
Page 24 - Vacation Comfort Profile Humidity Control
18 Vacation Comfort Profile Humidity Control You may wish to have different humidity settings when you’re on Vacation. Press the Menu area on the Main Screen to access the additional menu selections. Select Comfort Profiles , then select Humidity and Fresh Air Profiles option. S Touch VACATION to se...
Page 26 - View or Edit Schedule; For Zoning
20 A14249 View or Edit Schedule S To set a specific day use the Left ( A ) and Right ( " ) buttons beside the day names. d If you wish to copy this schedule to other days, touch COPY above the day. d Select the days you wish to have the same schedule, then touch COPY . S To select the time the a...
Page 27 - Guided Scheduling
21 d Select the zones you wish to have the same schedule, then press COPY . Guided Scheduling The Guided Scheduling feature will prompt you with simple questions to help set aschedule that meets your desired comfort level and lifestyle.If you are satisfied with your comfort settings, proceed to the ...
Page 29 - Upload My Schedule
23 Upload My Schedule The Upload my Schedule feature will allow you to upload your schedules from a PC or MAC computer, load those schedules onto a USB memory device, andupload the schedules into the Infinity Touch Control. S To download the MyInfinity application for your computer, sign into the My...
Page 30 - VACATION
24 S If the folder and file have been placed correctly on the USB device, youwill be asked if you wish to upload the schedule. d Select Yes . d When successful, press Next . VACATION Touch the VACATION icon in order to set a prolonged vacation schedule. A12174 S Touch PLAN VACATION to begin your vac...
Page 31 - REMINDERS; icon from the menu screen.; After you have selected your desired reminders, touch
25 A12110 REMINDERS With the Infinity Touch Control, there are accessory messages to remind you whenit is time for maintenance. Select the REMINDERS icon from the menu screen. A12123 S You have the option of choosing a pop --up reminder for your air filter, humidifier, UV lights, or ventilator pre -...
Page 32 - OPERATING STATUS; DONE; Accessories Status; RESET
26 OPERATING STATUS The OPERATING STATUS menu gives a quick look at the status of your Infinity R Heating and Cooling System. A12173 Within the operating status, you can view which function is operating, and whatstage the heating or cooling equipment is in. When you are finished looking at the opera...
Page 33 - Temperature Control Status; When you are done looking at your zone status, press
27 A12108 Temperature Control Status The Temperature Control Status allows you to take a quick look at the actualtemperatures, and temperature set points for each zone in your system. S When you are done looking at your zone status, press DONE . The system will indicate which mode is running by show...
Page 34 - DISPLAY; F or; Temperature Units; Select the desired temperature units, either; Backlight Levels
28 DISPLAY The following display preferences can be adjusted for Infinity Touch Control, Temperature Units ( ° F or ° C), Backlight Levels , Sound Settings and Screen Saver Settings . A14256 Temperature Units Select the desired temperature units, either ° F for Fahrenheit, or ° C for Celsius and tou...
Page 35 - ) buttons to set/change the brightness of; shall; be set back to the current selected level which may be OFF.; Sound Settings; To allow a buzzer to sound on each touch of the screen, touch; ENABLE; touch; DISABLE
29 S Use the Up ( Y ) and Down ( B ) buttons to set/change the brightness of back lighting. d Brightness levels include OFF or 1 --10 ° . NOTE: After 30 seconds of inactivity on the touch screen, the backlight level shall be set back to the current selected level which may be OFF. A14258 Sound Setti...
Page 36 - Screen Saver Settings; To allow a photo to act as a screen saver, touch; Touch Screen Calibration; Calibration can be performed by following the on --screen prompts.
30 Screen Saver Settings To allow a photo to act as a screen saver, touch ENABLE ; otherwise, touch DISABLE . A14260 Touch Screen Calibration If you experience any problems with touch position accuracy, Touch Screen Calibration can be performed by following the on --screen prompts. A14261
Page 37 - ENERGY TRACKING; VIEW ENERGY USAGE
31 ENERGY TRACKING The Infinity Touch Control has the ability to monitor and estimate the energy consumption of certain models of your Infinity System. A12111 S Touch VIEW ENERGY USAGE to view the estimated energy con- sumption in daily, monthly or annual time intervals. You can view ener-gy consump...
Page 38 - Set Time and Date; icon will bring up the time and date menu.; Manually Adjust Time and Date; Select manually adjust time and date and follow these steps:
32 A12113 TIME / DATE The TIME/DATE icon allows you to set the time and date for the Infinity Touch Control. A14250 Set Time and Date The time and date can either be set manually or can be synchronized with the web server (only for Wi--Fi enabled units). From the main screen, touch MENU, on thebotto...
Page 39 - Setup Daylight Savings Time
33 S To set the HOUR, MINUTE, MONTH, DAY , or YEAR, touch the feature you wish to change. A14251 S Use the Up ( Y ) and Down ( B ) buttons to make the appropriate changes. S When you have completed all of the settings touch SAVE . Setup Daylight Savings Time You can program your Infinity Touch Contr...
Page 41 - Selecting the; SERVICE; icon from the menu screen will allow you to view service; Service Information
35 SERVICE Selecting the SERVICE icon from the menu screen will allow you to view service contact information, set--up or modify service reminders and update the softwarefor your wall control. A14254 Service Information Your dealer information is easily accessible and may already be pre --programmed...
Page 43 - Updating Software Using USB; At the bottom of the EULA, choose “Yes” if you accept the agreement.; : If you do not wish to accept the agreement, you will not be
37 Updating Software Using USB S When software updates are available, they will be posted to on thedownloads page of the MyInfinity website, www.MyInfinityTouch.Carrier.com/Infinity/Downloads. NOTE : You will obtain best results using a USB drive that is 2GB, 4GB or 8GB in size. S From the downloads...
Page 44 - EXTRACT; folder of the USB drive.; UPDATE SOFTWARE USING USB; lation will take several minutes.
38 S Highlight the TSTAT folder in the WinZip window by clicking on thefolder icon ONCE to highlight the proper folder to be downloaded to theUSB drive. Then click on EXTRACT . S Choose the USB memory device root directory as the location to extractthe folder from the zip file. When the download is ...
Page 45 - The Infinity Touch control will perform a restart after the; button
39 S The Infinity Touch control will perform a restart after the DONE button is pressed. Once the Infinity Touch control has successfully restarted, theUSB device may be removed. S This completes the software upgrade process. Updating Software Using Wi--Fi (SYSTXCCITCC01 --A and SYSTXCCITW01 --A mod...
Page 46 - Selecting; stored information and settings will be maintained.; to view the release notes associated with the software to; Model / Serial Numbers
40 Selecting YES will initiate the software update process. Your Infinity Touch control will reboot in order to complete the software update process. All of your previously stored information and settings will be maintained. NOTE : Select DETAILS to view the release notes associated with the softwar...
Page 47 - PHOTO UPLOAD; PHOTO UPDATE; upload photo; icon on the menu screen on the Infinity Touch
41 PHOTO UPLOAD With the Infinity Touch Control, you can upload a personal photo to act as a screen saver. Select the PHOTO UPDATE icon from the menu screen. A12122 S Use the PC application to upload the photo on the control and save it toa standard USB drive. Go to https://www.MyInfinityTouch.com a...
Page 49 - Home Automation System Interface (If Applicable)
43 ZONE NAMES (IF APPLICABLE) With the Infinity Touch Control, you have the ability to customize zone names. Select the ZONE NAMES icon from the menu screen. A12156 S Touch the zone in which you choose to change the name. S Choose between selecting a COMMON NAME or CREATE A CUS- TOM NAME . d If you ...
Page 50 - SCREEN LOCK
44 SCREEN LOCK The screen may be locked by selecting the SCREEN LOCK icon from the menu screen. A13246 S A message will pop up asking if you want to proceed with the screenlock. Selecting Yes will lock the screen and take you back to the home screen. A13247 S To unlock the screen, press and hold UNL...
Page 51 - and touch; WIRELESS; With the appropriate models, the Infinity
45 A13248 S The screen will change and the control will then be accessible. If thescreen is to be locked again, return to the menu, select the screen lock and touch YES . WIRELESS With the appropriate models, the Infinity ® Touch Control can connect to the in home Wi--Fi to connect the Infinity Syst...
Page 52 - Select the; from the menu screen; ENABLED; SCAN FOR AVAILABLE ACCESS POINTS
46 representations or warranties, express or implied, including, to the extent permittedby applicable law, any implied warranty of merchantability or fitness for a particular purpose or use, about the compatibility of the user’s computer/network,or mobile device, with the Infinity Touch Control, and...
Page 53 - NEXT
47 A13235 S On the next screen look for the SSID of the router/access point. Afterbeing selected, it will be outlined in faint blue. Then select NEXT . A13236 S The selected network will show. Choose an appropriate Wi--Fi security.Usually auto --detect will correctly identify the type of security us...
Page 54 - Touch in the security key area, and the keyboard will appear.; through the process again.
48 A13237 S If a Wi--Fi security key is shown as on the right hand picture above thenselect the white bar and enter the security key, then select NEXT. S Touch in the security key area, and the keyboard will appear. d Use the on screen keyboard to enter the Wi--Fi security key, thentouch NEXT. S The...
Page 60 - WEATHER; icon to retrieve the weather forecast based your postal code.; CHANGE CURRENT LOCATION; code using the on screen keyboard.
54 WEATHER When the Infinity Touch Control is connected to a Wi--Fi network, use the WEATHER icon to retrieve the weather forecast based your postal code. A12119 S To enter your postal code, touch CHANGE CURRENT LOCATION . S Next, select your country (United States, Canada, or Mexico). S To enter yo...
Page 61 - UTILITY SETUP; person must enable the utility event interface.; Utility Event
55 UTILITY SETUP This section is only applicable if your utility company is running a demand response or price response program in which you have agreed to participate.Contact your local electrical utility company for information about programs inyour area. NOTE: If you do want to participate with y...
Page 62 - ing and cooling set points.; Price Response
56 type of event, the adjustment to the heating and cooling set points, thetime the event will end, an accept button, and an override button. S Pressing the accept button will accept the adjustments made to the heat- ing and cooling set points. S Pressing the override button will change the heating ...
Page 63 - Demand Response
57 A14264 Demand Response Demand response determines how the heating and cooling set points will beadjusted during a demand response event with two choices -- offsets or absolutetemperature. When offsets are selected, the heating and cooling set points are adjusted by the number of degrees selected....
Page 64 - Demand settings; will use the more favorable set point for the duration of the event.; Response Limits
58 Demand settings When a demand response is received from the utility company, the heating and cooling set points will be adjusted according to the absolute temperature or offsetshown here. If the set point at the time of the event is more favorable (uses lessenergy) than what you have programmed, ...
Page 65 - Restore UE factory Default Settings
59 Restore UE factory Default Settings Restore UE (Utility Event) factory default settings will restore all utility event set points and price settings to their original factory default values. A14268
Page 66 - NOTES
