Carrier INFINITY ICS 58MVC- User Manual

1

Infinity ICS --- Model 58MVC, Direct Vent 4 --- Way Multipoise

Condensing Gas Furnace With IdealComfort

t

IdealHumidity

t

Service and Maintenance Procedures

NOTE

: Read the entire instruction manual before starting the

installation.

ELECTRICAL SHOCK, FIRE OR EXPLOSION

HAZARD

Failure to follow warnings could result in personal injury,

death, or property damage.
Improper servicing could result in dangerous operation,

serious injury, death, or property damage.

--Before servicing, disconnect all electrical power to

furnace.

--When servicing controls, label all wires prior to

disconnecting. Reconnect wires correctly.

--Verify proper operation after servicing.

!

WARNING

ELECTRICAL SHOCK, FIRE OR EXPLOSION

HAZARD

Failure to follow this warning could result in property

damage, personal injury, or death.
The ability to properly perform maintenance on this

equipment requires certain expertise, mechanical skills,

tools, and equipment. If you do not possess these, do not

attempt to perform any maintenance on this equipment

other than those procedures recommended in the User’s

Manual.

!

WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow this warning could result in personal

injury, death, or property damage.
Never store anything on, near, or in contact with the

furnace, such as:
1. Spray or aerosol cans, rags, brooms, dust mops, vacuum

cleaners, or other cleaning tools.
2. Soap powders, bleaches, waxes or other cleaning

compounds, plastic or plastic containers, gasoline, kerosene,

cigarette lighter fluid, dry cleaning fluids, or other volatile

fluids.
3. Paint thinners and other painting compounds, paper bags,

or other paper products.

!

WARNING

ama

CERTIFIED

As an ENERGY STAR

®

Partner,

Carrier Corporation has determined

that this product meets the ENERGY

STAR

®

guidelines for energy effi-

ciency.

REGISTERED

ISO 9001:2000

SAFETY CONSIDERATIONS

Recognize safety information. This is the safety--alert symbol

. When you see this symbol on the unit and in instructions or

manuals, be alert to the potential for personal injury.
Understand

the

signal

words

DANGER,

WARNING,

CAUTION, and NOTE. These words are used with the

safety--alert symbol. DANGER identifies the most serious

hazards which will result in severe personal injury or death.
WARNING signifies hazards which could result in personal

injury or death. CAUTION is used to identify unsafe practices
which may result in minor personal injury or product and

property damage. NOTE is used to highlight suggestions which
will result in enhanced installation, reliability, or operation.
Untrained personnel can perform basic maintenance functions

described in User’s Information Manual such as cleaning and
replacing air filters. All other operations must be performed by

trained service personnel. When working on heating equipment,
observe precautions in the literature, on tags, and on labels

attached to or shipped with the unit and other safety precautions

that may apply.

CUT HAZARD

Failure to follow this caution may result in personal injury.
Be careful of sharp metal edges, etc. Use care and wear

protective clothing, gloves, and safety glasses when

removing parts.

CAUTION

!

Installing and servicing heating equipment can be hazardous due
to gas and electrical components. Only trained and qualified

service agency personnel should install, repair, or service heating

equipment.
Follow all safety codes including the National Fuel Gas Code

(NFGC) NFPA 54--2006/ANSI Z223.1--2006 in the USA, CSA
B149.1--05 National Standard of Canada, Natural Gas and

Propane Installation Codes (NSCNGPIC) in Canada, and the

Installation Standards, Warm Air Heating and Air Conditioning
Systems (NFPA 90B) ANSI/NFPA 90B. Wear safety glasses and

work gloves. Have a fire extinguisher available during start--up
and adjustment procedures and service calls.