Carrier 48HJ020-028- User Manual

Carrier 48HJ020-028

Carrier 48HJ020-028– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – 8 Series — gas heat models; Table of contents
  • Page 3 – Proven compressor reliability
  • Page 6 – Model number nomenclature; Quality Assurance
  • Page 7 – ARI* capacity ratings
Loading the manual

Copyright 2004 Carrier Corporation

Form 48H,T-6PD

Standard-Efficiency (TM) units
meet minimum ASHRAE 90.1 ener-
gy efficiency requirements. High-
Efficiency (HJ) units well exceed
ASHRAE 90.1 energy efficiency
requirements. Gas heating with
electric cooling rooftop units offer:

• Pre-painted galvanized steel cabinet

for long life and quality appearance

• Commercial strength base rails with

built-in rigging capability

• Convertible design for vertical or hori-

zontal supply/return (004-014 only)

• Non-corrosive, sloped condensate

drain pan, meets ASHRAE 62 (IAQ)

• Two-inch return-air filters
• A wide assortment of factory-installed

options available, including high-static
drives that provide additional
performance range

• Optional factory-installed COBRA™

energy recovery unit (option on
48HJ004-014 units only)

• Factory-installed PremierLink™

digital communicating controls

• Factory-installed optional gear driven

EconoMi$er IV (ver tical return for
sizes 004-012 only) for use with
standard rooftop unit controls
(includes CO

2

sensor control

capability)

• Factory-installed optional gear driven

EconoMi$er2 (vertical return only) for
use with PremierLink DDC controls
(includes 4 to 20 mA actuator for
demand control ventilation)

• Humidi-MiZer™ adaptive dehumidi-

fication system (48HJ004-014)

• MoistureMi$er™ dehumidification

package

Heat Options

• Exclusive integrated gas control

board with diagnostics

• Alumagard™ heat exchanger coating
• Induced-draft fan for gas combustion
• Tubular, dimpled heat exchangers
• Natural gas
• LP conversion kits
• Low NO

X

(size 004-006 only)

• Optional stainless steel heat

exchangers.

WEATHERMAKER® 48TM004-028

WEATHERMASTER® 48HJ004-028

Single-Package Rooftop Units

Gas Heating/Electric Cooling

3 to 25 Nominal Tons

Product
Data

48HJ004-014

48TM004-014

48HJ015,017

48TM016-025

48TM028

905

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - 8 Series — gas heat models; Table of contents

2 Features/Benefits Every compact one-pieceunit arrives fully assembled,charged, tested, and ready torun. 48 Series — gas heat models All ignition components are contained in the compact IGC (integrated gas controller) which is easily accessible for servicing. The IGC control board, de-signed and ma...

Page 3 - Proven compressor reliability

3 system. The inducer fan draws hot combustion gas through the heatexchanger at the optimum rate for the most effective heat transfer. The heat exchanger operates under negative pressure, preventing flue gas leakage into the indoor supply air. During the Heating mode, the evaporator-fan relay automa...

Page 6 - Model number nomenclature; Quality Assurance

6 48TM004-014 Model number nomenclature Coil Protection Options (fin/tube) – – Al/Cu Cond & Evap (Standard Unit) B – Cu/Cu Cond & Evap C – Cu/Cu Cond & Al/Cu Evap F – E-Coat Al/Cu Cond & Al/Cu Evap G – E-Coat Cu/Cu Cond & Al/Cu Evap V – Al/Cu Pre-Coat Cond Fin & Al/Cu Evap Ca...

Other Carrier Models